1、 ETSI ES 202 336-7 V1.1.1 (2009-12)ETSI Standard Environmental Engineering (EE);Monitoring and Control Interface for Infrastructure Equipment(Power, Cooling and Building Environment Systems used inTelecommunication Networks);Part 7: Other utilities systemcontrol and monitoring information modelETSI
2、ETSI ES 202 336-7 V1.1.1 (2009-12)2Reference DES/EE-02037-7 Keywords control, interface, management, power, system ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enr
3、egistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in cont
4、ents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the docume
5、nt may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.or
6、g/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. All rights reserved. DECTTM, PLUGTESTSTM, UM
7、TSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefi
8、t of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI ES 202 336-7 V1.1.1 (2009-12)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Info
9、rmative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Other utilities system 7g3Annex A (normative): Summary of mandatory monitoring/supervision information and functions 9g3A.1 Other utilities system 9g3A.1.1 Table for access control system 9g3A.1.2
10、Table for video monitor system 10g3Annex B (informative): Summary of non-mandatory monitoring/supervision information and functions 11g3B.1 Access control system 11g3B.2 Video monitor system 12g3Annex C (normative): Mandatory XML structure and elements 13g3C.1 Structure of an XML document for other
11、utilities system 13g3Annex D (informative): Examples of XML elements for other utilities system 15g3D.1 The elements of other utilities system . 15g3D.2 The elements of access control system 15g3D.3 The elements of access control system 15g3D.4 The elements of access control system 16g3D.5 The eleme
12、nts of access control system . 16g3D.6 The elements of access control system 16g3D.7 The elements of video monitor system . 16g3D.8 The elements of video monitor system . 16g3D.9 The elements of video monitor system 17g3Annex E (informative): Bibliography . 18g3History 19g3ETSI ETSI ES 202 336-7 V1.
13、1.1 (2009-12)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intelle
14、ctual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investig
15、ation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This ETSI Standard (ES)
16、has been produced by ETSI Technical Committee Environmental Engineering (EE). The present document is part 7 of a multi-part deliverable covering Monitoring and control interface for infrastructure equipment (Power, Cooling and environment systems used in telecommunication networks), as identified b
17、elow: Part 1: “Generic Interface“; Part 2: “DC power system control and monitoring information model“; Part 3: “AC UPS power system control and monitoring information model“; Part 4: “AC distribution power system control and monitoring information model“; Part 5: “AC diesel back-up generator system
18、control and monitoring information model“; Part 6: “Air conditioning system control and monitoring information model“; Part 7: “Other utilities system control and monitoring information model“; Part 8: “Remote Power Feeding System control and monitoring information model“. ETSI ETSI ES 202 336-7 V1.
19、1.1 (2009-12)51 Scope The present document applies to monitoring and control of other utilities for telecommunication equipment. The present document defines: The monitored and controlled other utilities system architectures. The minimum set of exchanged information required at the interface, descri
20、bed in “natural language“ in text tables. The XML files with tags and variables corresponding to the data in the tables. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revis
21、ions do not apply. Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative referen
22、ces. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative re
23、ferences The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI ES 202 336-1: “Enviro
24、nmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks); Part 1: Generic Interface“. 2 IETF RFC 4566: “Session Description Protocol“. 2.2 Informative references The following referenc
25、ed documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. i.1 IEEE 802 (part 1 to part 11): “IEEE Standard for Loc
26、al and Metropolitan Area Networks: Overview and Architecture“. i.2 ISO/IEC 8879:1986: “Information processing - Text and office systems - Standard Generalized Markup Language (SGML)“. ETSI ETSI ES 202 336-7 V1.1.1 (2009-12)63 Definitions and abbreviations 3.1 Definitions For the purposes of the pres
27、ent document, the following terms and definitions apply: alarm: any information signalling abnormal state, i.e. different to specified normal state of hardware, software, environment condition (temperature, humidity, etc.) NOTE: The alarm signal shall be understood by itself by an operator and shall
28、 always have at least one severity qualification or codification (colour, level, etc.). EXAMPLE: Rectifier failure, battery low volage, etc. alarm loop: electrical loop which open or closed state correspond to alarm start (set) or end (clear) state alarm message: text parts of the alarm structure al
29、arm structure: organized set of information fields in an alarm data frame (time stamp, set/clear, text, etc.) Control Unit (CU): integrated unit in an equipment to monitor and control this equipment through sensors and actuators Data Gathering Unit (DGU): functional unit used for several functions:
30、collect serial, digital, and analog data from several equipment; option to send (output) serial or digital commands; forward/receive information to/from the Local/Remote Management Application via agreed protocols; mediation between interfaces and protocols. NOTE: This function may be integrated as
31、part of specific equipment. ethernet: LAN protocol NOTE: Equivalent to IEEE 802.1 to 11 i.1. event: any information signalling a change of state which is not an alarm: e.g. battery test, change of state of battery charge NOTE: The event signal is be understood by itself by an operator and is always
32、have at least one severity qualification or codification (color, level, etc.). It is be transmitted in a formatted structure with text message and other fields like for alarm, e.g. an event can be coded as an alarm with severity “0“. eXtensible Mark-up Language (XML): application profile or restrict
33、ed form of SGML NOTE: By construction, XML documents are conforming SGML the Standard Generalized Markup Language (ISO/IEC 8879 i.2). documents. XML is designed to describe data and focus on what data is. XML is discerned from the well known Hypertext Transfer Mark-up Language (HTML) which was desig
34、ned to display data and to focus on how data looks. Extensible Style sheet Language (XSL): language for expressing style sheets NOTE: It consists of two parts, a language for transforming XML documents, and an XML vocabulary for specifying formatting semantics. An XSL style sheet specifies the prese
35、ntation of a class of XML documents by describing how an instance of the class is transformed into an XML document that uses the formatting vocabulary. infrastructure equipment: power, cooling and building environment systems used in telecommunications centres and access networks locations EXAMPLE:
36、Cabinets, shelters, underground locations, etc. ETSI ETSI ES 202 336-7 V1.1.1 (2009-12)7object: class description of items that accept a set of properties or functions NOTE: Generic objects can include more specific items and inherit from their properties. If correctly structured, object programming
37、 can allow the system to evolve, i.e. be more future-proof. The code should intrinsically be open and structured. warning: low severity alarm World Wide Web Consortium (W3C): consortium founded in October 1994 to develop common interoperable protocols and promote World Wide Web NOTE: See http:/www.w
38、3c.org. XCU: CU enabled to communicate using XML interface as defined in the present document XML Schema Definition (XSD): new more detailed XML description compared to the previous one, the DTD 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: CIF Common
39、 Intermediate Format CU Control Unit of an equipment CUE Current Using Equipment D1 4 CIF DGU Data Gathering Unit DTD Document Type Definition FTP File Transfer Protocol HTML Hypertext Transfer Make-up Language HTTP Hypertext Transfer Protocol IP Internet Protocol LAN Local Array Network PTZ Pan/Til
40、t/Zoom PTZ Pan Tilt Zoom QCIF Quarter Common Intermediate Format QVGA Quart VGA RTSP Real Time Streaming Protocol RTSP Real Time Streaming Protocol SDP Session Description Protocol SGML Standard Generalized Markup Language TCP Transmission Control Protocol for IP URL Uniform Resource Locator VGA Vid
41、eo Graphics Array XCU XML enabled CU XCU XML enabled CU XML eXtensible Markup Language (see W3C) 4 Other utilities system Other utilities system includes access control system and video monitor system which ensure the safety and reliability of telecommunication equipment. Access control system is us
42、ed to authenticate and control electronic lock. The main elements of access system are: secret key (inductive card, dactylogram, retina,); access reader; access controller; electronic lock, which is depicted in figure 1. ETSI ETSI ES 202 336-7 V1.1.1 (2009-12)8Secret key keep user information, acces
43、s reader receive and decrypt user information, access controller receive decrypted data from access reader, and control the on/off of electronic lock after authentication. Figure 1: Access control system Video monitor system includes control system, video encoder and camera which is depicted in figu
44、re 2. Camera capture analog video signal, video encoder encode analog signal to digital video code such as H.264, H.263, Mpeg4, etc., control system includes RTSP server, FTP server and PTZ control signal. RTSP server create and transfer stream media, FTP server transfer record file of video and pic
45、ture. The present document only describe the SDP file of RTSP server compliance to RFC 4566 2 and FTP server URL with XML language. Figure 2: Video monitor system Table A.1 (Table Environment in annex A) corresponds to access control system mandatory data that shall be provided for different types o
46、f equipment rooms environment monitor, and table B.1 (see annex B) includes data that should be provided in addition to mandatory one. Table A.2 (Table Environment in annex A) corresponds to video monitor system mandatory data that shall be provided for different types of equipment rooms environment
47、 monitor, and table B.2 (see annex B) includes data that should be provided in addition to mandatory one. Access controller Electronic lock(1) Access reader i11i1 Secret key Access readeri1ni1 Secret key Electronic lock(n) Video encoder Camera (1) Control system (RTSP server And FTP server) Camera (
48、n) Video Video Video media PTZ control ETSI ETSI ES 202 336-7 V1.1.1 (2009-12)9Annex A (normative): Summary of mandatory monitoring/supervision information and functions This annex gathers the information needed on the Remote Monitoring Application for different types of building environment. It spe
49、cifies the mandatory requirements that must be provided in all cases. When an optional alarm that requires a parameter set is present, the corresponding parameter set is mandatory in the control section in order to allow remote adjustment under appropriate login procedure According to their types (Description, Alarm, Data, etc.), as defined in ES 202 336-1 1 the information shall be provided by the Control Unit (XCU). NOTE: If there is no XCU this data will be provided by the Data Gathering Unit (DGU). When a CU has a field bus co
