ETSI ETR 153-1994 Methods for Testing and Specification (MTS) Guidance on the Production and Completion of System Conformance Test Report (SCTR) and Protocol Conformance Test Repor_1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QJ 20037-2011 镀膜导线酸洗工艺技术要求.pdf

QJ 20038-2011 航天标准件合格鉴定程序.pdf

QJ 20039-2011 不锈钢螺钉垫圈组合件通用规范.pdf

QJ 20040.1-2011 不锈钢螺钉垫圈组合件.第1部分：十字槽盘头螺钉、弹簧垫圈和平垫圈.pdf

QJ 20040.2-2011 不锈钢螺钉垫圈组合件.第2部分：十字槽盘头螺钉和鞍形弹性垫圈.pdf

QJ 20040.3-2011 不锈钢螺钉垫圈组合件.第3部分：十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈.pdf

QJ 20040.4-2011 不锈钢螺钉垫圈组合件.第4部分：六角头螺栓、弹簧垫圈和平垫圈.pdf

QJ 20040.5-2011 不锈钢螺钉垫圈组合件.第5部分：鞍形弹性垫圈.pdf

QJ 20041-2011 带锁键螺柱通用规范.pdf