ETSI ETR 279-1997 Satellite Personal Communications Networks (S-PCN) Need and Objectives for Standards in Addition to the ETSs on Essential Requirements《卫星个人通信网络(S-PCN) 除ETSs关于基本要求_1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1867-2006 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers《动态机械分析仪的温度校准用标准试验方法》.pdf

ASTM E1867-2011 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers《动态机械分析仪的温度校准的标准试验方法》.pdf

ASTM E1867-2012 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers《动态机械分析仪的温度校准用标准试验方法》.pdf

ASTM E1867-2013 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers《动态机械分析仪的温度校准用标准试验方法》.pdf

ASTM E1867-2016 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers《动态机械分析仪温度校准的标准试验方法》.pdf

ASTM E1867-2018 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers.pdf

ASTM E1868-2004 Standard Test Method for Loss-On-Drying by Thermogravimetry《用热重量分析法测定干燥损耗的标准试验方法》.pdf

ASTM E1868-2010 Standard Test Method for Loss-On-Drying by Thermogravimetry《热重量分析法测定干燥失量的标准试验方法》.pdf

ASTM E1868-2010(2015) Standard Test Methods for Loss-On-Drying by Thermogravimetry《采用热重量分析法的干燥损耗的标准试验方法》.pdf