ETSI ETS 300 324-7-1999 V Interfaces at the Digital Local Exchange (LE) V5 1 Interface for the Support of Access Network (AN) Part 7 Test Suite Structure and Test Purposes (TSS&TP)_1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 6750-1993 机载武器火力控制系统校正与校靶通用要求.pdf

HB 676-1992 焊硬质合金螺旋刀片的套式立铣刀.D=63～125mm.pdf

HB 6764-1993 飞机镉镍蓄电池组和单体蓄电池.通用规范.pdf

HB 6767-1993 琴钢丝制圆柱螺旋压缩、拉伸弹簧.技术条件.pdf

HB 677-1992 加工轻合金用焊硬质合金螺旋刀片的套式立铣刀.D=50～125mm.pdf

HB 6771-1993 银基钎料.pdf

HB 678-1992 加工轻合金用镶齿套式面铣刀.D=80～200mm.pdf

HB 6783.1-1993 军用机载设备气候环境试验箱（室〕检定方法.总则.pdf

HB 6783.2-1993 军用机载设备气候环境试验箱（室）检定方法.低气压（高度）试验箱（室）.pdf