ETSI ETS 300 360-1995 Integrated Services Digital Network (ISDN) Signalling System No 7 Signalling Interworking Specification for ISDN User Part (ISUP) Version 2《综合业务数字网(ISDN) 7号信令_1.pdf

上传人:registerpick115 文档编号:732307 上传时间:2019-01-08 格式:PDF 页数:70 大小:2.63MB
下载 相关 举报
ETSI ETS 300 360-1995 Integrated Services Digital Network (ISDN) Signalling System No 7 Signalling Interworking Specification for ISDN User Part (ISUP) Version 2《综合业务数字网(ISDN) 7号信令_1.pdf_第1页
第1页 / 共70页
ETSI ETS 300 360-1995 Integrated Services Digital Network (ISDN) Signalling System No 7 Signalling Interworking Specification for ISDN User Part (ISUP) Version 2《综合业务数字网(ISDN) 7号信令_1.pdf_第2页
第2页 / 共70页
ETSI ETS 300 360-1995 Integrated Services Digital Network (ISDN) Signalling System No 7 Signalling Interworking Specification for ISDN User Part (ISUP) Version 2《综合业务数字网(ISDN) 7号信令_1.pdf_第3页
第3页 / 共70页
ETSI ETS 300 360-1995 Integrated Services Digital Network (ISDN) Signalling System No 7 Signalling Interworking Specification for ISDN User Part (ISUP) Version 2《综合业务数字网(ISDN) 7号信令_1.pdf_第4页
第4页 / 共70页
ETSI ETS 300 360-1995 Integrated Services Digital Network (ISDN) Signalling System No 7 Signalling Interworking Specification for ISDN User Part (ISUP) Version 2《综合业务数字网(ISDN) 7号信令_1.pdf_第5页
第5页 / 共70页
点击查看更多>>
资源描述

1、ETS 300 360 February 1995 Source: ETSI TC-SPS Reference: DEEPS-6006 UDC: 621.395 Key words: ISDN, SS7, ISUP, interworking Integrated Services Digital Network (ISDN); Signalling System No.7; Signalling interworking specification for ISDN User Part (ISUP) version 2 ETSI European Telecommunications Sta

2、ndards Institute ETSI Secretariat Postal address: 06921 Sophia Antipolis Cedex - FRANCE Office address: Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE Tel.: + 33 92 94 42 O0 - Fax: + 33 93 65 47 16 European Telecommunications Standards Institute 1 995. All rights reserved. No part may be

3、reproduced except as authorised by written permission. The copyright and the foregoing restriction on reproduction extend to all media in which the information may be embodied. ETSI ETS*300*360 95 3400855 OOL7L44 230 M ETSI ETS*300*3b0 95 3400855 0017145 177 Page 2 ETS 300 360: February 1995 Whilst

4、every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to “ETSI Editing and Standards Approval Dept.“ at the address shown on the title page. ETSI ETS*300*360

5、95 I 3400855 0017146 O03 Page 3 ETS 300 360: February 1995 Contents Foreword . 9 1 Scope . 11 2 Normative references 11 3 Definitions. symbols and abbreviations . 12 3.3 Abbreviations 12 . 3.1 Definitions 12 3.2 12 Symbols . 4 General considerations . 14 4.2 Working assumptions . 14 . 4.1 General 14

6、 5 Miscellaneous interworking aspects . 15 5.1 Interworking handling of the echo control device indicator (or the incoming half echo suppressor indicator) of the address complete message in ISUP (or TUPTTUP + ) . 15 5.1 . 1 Interworking from ISUP to R2, No.5 15 5.1.2 Interworking from ISUP to TUPTTU

7、P + . 15 5.1 -3 Interworking from TUPTTUP + to ISUP . 15 Handling of the called partys category and the charge indicator in case of Transfer of no charge or charge information in the answer message in case of 5.2 5.3 interworking TUPTTUP + to ISUP 16 interworking TUPTTUP + to ISUP 16 5.4 Simple segm

8、entation 16 Handling an early ACM when interworking from TUP to ISUP . 16 5.5 6 Interworking 17 Interworking from Signalling System ISUP to Signalling System No.5 17 Circuit seizure 17 Address information sending sequence 17 Call release and call failures . 18 6.1 6.1.1 Forward direction 17 6.1.1.3

9、Forward transfer 17 6.1.2 Backward direction 18 6.1.2.1 Address complete 18 6.1.1.1 6.1.1.2 6.1.1.4 Answer . 18 6.1.2.2 6.1.2.3 Clear-backhe-answer sequence 18 6.1 -2.4 Call release and call failures . 18 6.1.2.5 Fallback 19 6.1.2.6 Propagation delay . 19 6.1.3 Considerations on supplementary servic

10、es 19 6.1.3.1 Connected Line identification Presentation (COLPI/ Connected Line identification Restriction (COLR) . 19 6.1 -3.2 Closed User Group (CUG) 19 6.1 -3.3 User-to-User Signalling (UUS) 19 6.1.3.3.1 UUS Service 1 (UUSI) implicit 19 6.1.3.3.2 UUS1 explicit, non-essential . 19 6.1.3.3.3 UUS Se

11、rvice 2 (UUS2) explicit, non-essential 20 Page 4 ETS 300 360: February 1995 6.3.1 6.3.2 6.3.3 6.1 -3.3.4 UUS Service 3 (UUS3) explicit. non-essential. requested during call Set-up 20 6.1.3.3.5 UUS3 explicit. non-essential. requested after call set-up . 20 Interworking from Signalling System ISUP to

12、Signalling System R2 20 Address information sending sequence 20 6.2 6.2.1 Forward direction . 20 6.2.1 -1 6.2.1.2 Language or discriminating digit 20 6.2.1.3 Calling partys category . 20 6.2.1.4 Satellite . 21 6.2.1.5 Continuity check . 21 6.2.1.6 Echo control . 21 6.2.1.7 Forward transfer . 21 6.2.

13、1 .a Call release and call failure . 21 6.2.2 Backward direction . 22 6.2.2.1 Address complete . 22 6.2.2.2 Answer . 22 6.2.2.3 Clear-backhe-answer sequence . 22 6.2.2.4 Call release and call failures 22 6.2.2.5 Fallback., . 23 6.2.2.6 Propagation delay . 23 Considerations on supplementary services

14、. 23 6.2.3.1 COLPKOLR . 23 6.2.3.2 CUG . 24 6.2.3.3 UUS 24 6.2.3.3.1 UUSl implicit 24 6.2.3.3.2 UUSl explicit. non-essential 24 6.2.3.3.3 UUSZ explicit. non-essential 24 6.2.3.3.4 UUS3 explicit. non-essential. requested during call set-up . -24 6.2.3.3.5 UUS3 explicit. non-essential. requested after

15、 call set-up -24 Interworking from Signalling System ISUP to Signalling System TUP 24 Forward direction., . 24 6.2.3 6.3 6.3.1 . 1 Initial address message 24 6.3.1 . 1 . 1 6.3.1 . 1.2 Calling partys category 25 Message indicators 25 6.3.1.2 Continuity message -26 6.3.1.3 Forward transfer -26 6.3.1.4

16、 Call release and call failures 26 Backward direction . 26 6.3.2.1 General request message . 26 Calling party category request . 26 6.3.2.2 Address complete . 27 6.3.2.1.1 6.3.2.1.2 Calling line identity request . 27 6.3.2.3 Answer . 27 6.3.2.4 Clear-backhe-answer sequence . 28 6.3.2.5 Call release

17、and call failures 28 6.3.2.6 Fallback . 29 6.3.2.7 Propagation delay . 29 Considerations on supplementary services . 29 6.3.3.1 COLP/COLR . 29 6.3.3.2 CUG . 29 6.3.3.3 UUS 30 6.3.3.3.1 US1 implicit 30 6.3.3.3.2 UUSl explicit, non-essential 30 6.3.3.3.3 UUSZ explicit. non-essential 30 6.3.3.3.4 UUS3

18、explicit. non-essential. requested during call set-up 30 ETSI ETS*300*360 95 3400855 0037348 986 m Page 5 ETS 300 360: February 1995 6.5.2 6.5.3 6.6.2 6.3.3.3.5 UUS3 explicit. non.essentia1. requested after call set.up 30 6.4.1 Forward direction 30 Initial address message . 30 6.4 Interworking of Si

19、gnalling System No.5 to Signalling System ISUP 30 6.4.1 . 1 6.4.1.1.1 Called party number 30 6.4.1 . 1.2 Calling partys category . 31 6.4.1.1.3 Forward call indicators . 31 6.4.1 . 1.4 Nature of connection . 31 6.4.1 . 1.5 Transmission medium requirement . 32 6.4.1 -1.6 Propagation delay . 32 Call r

20、elease and call failures . 32 6.4.1.2 Forward transfer 32 6.4.2 Backward direction 32 6.4.2.1 Address complete 32 6.4.2.2 Answer . 32 6.4.2.3 Connect 32 6.4.2.4 Clear-backhe-answer sequence 32 6.4.2.5 Call release and call failures . 32 Considerations on supplementary services 33 6.4.3.1 Malicious C

21、all Identification (MCID) . 33 6.4.3.2 UUS3 explicit, non-essential. requested after call Set-up . 33 Interworking from Signalling System R2 to Signalling System ISUP . 33 6.4.1.3 6.4.3 6.5 6.5.1 Forward direction 33 Initial address message . 33 6.5.1.1 6.5.1.1.1 Called party number 33 6.5.1.1.2 Cal

22、ling partys category . 34 6.5.1.1.3 Forward call indicators . 34 6.5.1.1.4 Nature of connection . 34 6.5.1.1.5 Transmission medium requirement . 35 6.5.1.1.6 Propagation delay . 35 6.5.1.2 Call release and call failures . 35 Backward direction 35 6.5.2.1 Address complete 35 6.5.2.2 Answer . 35 6.5.2

23、.4 Clear-backhe-answer sequence 36 6.5.2.5 Call release and call failures . 36 6.5.3.1 MCID . 36 6.5.3.2 6.5.2.3 Connect 35 Considerations on supplementary services 36 set-up . 37 UUS3 explicit. non.essentia1, requested after call 6.6 Interworking from Signalling System TUP to Signalling System ISUP

24、 . 37 6.6.1 Forward direction 37 Initial address message . 37 6.6.1.1.1 Called party number 37 6.6.1.1.2 Calling partys category . 37 6.6.1.1.3 Forward call indicators . 38 6.6.1 . 1.4 Nature of connection . 38 6.6.1.1.5 Transmission medium requirement . 38 6.6.1.1.6 Redirection information 39 6.6.1

25、 . 1.7 Propagation delay . 39 6.6.1.2 Continuity message 39 6.6.1.3 Forward transfer 39 6.6.1.4 Call release and call failures . 40 Backward direction 40 6.6.2.1 Address complete 40 6.6.2.2 Answer . 40 6.6.2.3 Connect 41 6.6.1.1 ETSI ETS*300*3b0 95 m 3400855 0017149 812 Page 6 ETS 300 360: February

26、1995 6.6.2.4 Clear-backhe-answer sequence . 41 6.6.2.5 Call release and call failures 41 Considerations on supplementary services . 42 6.6.3.1 MCID 42 6.6.3.2 UUS3 explicit, non-essential. requested after call set-up . 43 Interworking from Signalling System ISUP to Signalling System TUP + . 43 6.7.1

27、 Forward direction . 43 Initial address message with additional information 43 6.7.1.1.1 Calling partys category 43 6.7.1.1.2 Calling access signalling capability . 43 6.7.1.1.4 First indicator octet 44 6.7.1.1.5 Closed user group information . 44 6.7.1.1.6 Additional calling party information 44 6.

28、7.1.1.7 Additional routeing information 45 6.7.1.1.8 6.6.3 6.7 6.7.1.1 6.7.1.1.3 Message indicators . -43 Calling line identity . -45 6.7.1.2 Continuity message . 45 6.7.1.3 Forward transfer . 45 6.7.1.4 Call release and call failures 45 6.7.2 Backward direction . 46 6.7.2.1 General request message

29、. 46 6.7.2.1.1 Calling line identity request . 46 6.7.2.2 Address complete . 46 6.7.2.3 Answer . 47 6.7.2.4 Clear-backhe-answer sequence . 47 6.7.2.5 Call release and call failures 48 6.7.2.6 Fallback . 48 6.7.2.7 Propagation delay . 48 Considerations on supplementary services . 49 6.7.3.1 uus 49 UU

30、Sl implicit 49 UUSl explicit. non-essential 49 UUS2 explicit. non-essential 49 requested during call set-up 49 requested after call set-up -49 UUS2, explicit, essential . 49 during call Set-up. 49 6.7.3.2 CLIP/CLI R 49 6.7.3.3 CUG . 51 6.7.3.4 COLPKOLR . 51 6.7.3.5 Subaddressing . -51 Coding of bear

31、er capability and high layer compatibility . 52 6.7.4.1 Bearer Capability -52 6.7.4.2 High layer compatibility 52 Interworking of Signalling System TUP + to Signalling System ISUP . 52 6.8.1 Forward direction . 52 Initial address message 52 6.8.1.1.1 Called party number . 52 6.8.1.1.2 Calling partys

32、 category 52 6.8.1 . 1 . 3 Forward call indicators . 53 6.8.1 . 1.4 Nature of connection 53 6.8.1.1.5 Transmission medium requirement . 54 6.8.1.1.7 Optional forward call indicators . 54 6.8.1 . 1.8 Closed user group interlock code . 54 6.8.1 . 1 . 9 User-to-user information . 54 6.7.3 6.7.3.1 . 1 6

33、.7.3.1.2 6.7.3.1.3 6.7.3.1.4 UUS3 explicit, non-essential, 6.7.3.1.5 UUS3 explicit, non-essential, 6.7.3.1.6 6.7.3.1.7 UUS3 explicit, essential, requested 6.7.4 6.8 6.8.1 . 1 6.8.1.1.6 Access transport . 54 ETSI ETS*300*360 95 3400SS OOL7150 534 Page 7 ETS 300 360: February 1995 6.8.1.1.10 User serv

34、ice information 54 6.8.1.1.1 1 Redirection information 54 6.8.1.1 . 12 Propagation delay . 55 6.8.1.2 Continuity message 55 6.8.1.3 Call release and call failures . 55 6.8.2 . Backward direction 56 6.8.2.1 Address complete 56 6.8.2.2 Answer . 56 6.8.2.3 Connect 57 6.8.2.4 Clear-backhe-answer sequenc

35、e 58 6.8.2.5 Call release and call failures . 58 Considerations on supplementary services 59 6.8.3.1 UUS1 implicit 59 6.8.3.2 UUS3 explicit, non-essential. requested after call Set-up . 59 6.8.3.3 CLIP/CLIR . 59 6.8.3.4 CUG . 60 6.8.3.5 Subaddressing . 61 6.8.3.6 MCID . 61 Coding of bearer capabilit

36、y and high layer compatibility 61 6.8.4.1 Bearer capability 61 6.8.4.2 High layer compatibility . 61 6.8.3 6.8.4 Annex A (informative): Echo control procedure in case of interworking 62 A . 1 Interworking from Signalling System No.5/R2 to ISUP 62 A . 1 -1 Forward direction . 62 A . 1 . 2 Backward di

37、rection . 62 A.2 Interworking from Signalling System ISUP to No.5/R2 64 A.3 Interworking from No.5/R2 to ISUP version 2 . 66 A.3.1 Closer located outgoing echo control device . 66 A.3.2 Farther located outgoing echo control device 67 A.4 Interworking from ISUP version 2 to No.5/R2 . 68 A.4.1 Closer

38、located incoming echo control device 68 A.4.2 Farther located incoming echo control device . 69 History 70 ETSI ETS*300*360 95 3400855 0017L5L 470 Page 8 ETS 300 360: February 1995 Blank page ETSI ETS*300*3b0 95 = 3400855 OOLL52 307 Page 9 ETS 300 360: February 1995 Foreword This European Telecommun

39、ication Standard (ETS) has been produced by the Signalling Protocols and Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ET SI). This ETS specifies the interworking applicable to Signalling System No.7 Integrated Services Digital Network (ISDN) User Part (

40、ISUP) version 2. Proposed transposition dates Date of latest announcement of this ETS (doa): 31 May 1995 Date of latest publication of new National Standard or endorsement of this ETS (dop/e): 30 November 1995 I Date of withdrawal of anv conflictina National Standard idow): 30 November 1995 I ETSI E

41、TS*300*360 95 3400855 OOL7L53 243 W Page 10 ETS 300 360: February 1995 Blank page ETSI ETS*300*360 95 3400855 0037354 LAT W Page 11 ETS 300 360: February 1995 1 Scope This European Telecommunication Standard (ETS) specifies the interworking between the Signalling System No.7 Integrated Services Digi

42、tal Network (ISDN) User Part (ISUP) version 2 (as specified in ETS 300 356-1 i211 and the Signalling Systems No.5 (as specified in CCITT Recommendations 0. 140 to 0. 164 i71), R2 (as specified in CCITT Recommendations 0.400 to 0.490 i811, Telephone User Part (TUP) (as specified in CCITT Recommendati

43、ons 0.721 to 0.725 i171). and TUP+ (as specified in CEPT Recommendation T/S 43-02 E i1 81). ISUP version 2 (as specified in ETS 300 356-1 i211 has been designed to allow peer-to-peer operation to a version 1 exchange (as specified in ETC 300 121 ill) without requiring any knowledge of that situation

44、. This means that different ISUP versions (like version 1 and version 2) cannot be considered as different signalling systems in an exchange. A specific interworking specification is not required, relevant information is contained in ETS 300 356-1 i21. This specification is applicable to internation

45、al transit exchanges, but may be used as a basis for the interworking in international gateway exchanges, because ISUP at the national side may also be based on ISUP version 2. 2 Normative references This ETS incorporates by dated and undated reference, provisions from other publications. These norm

46、ative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this ETS only when incorporated in it by amendment or revision. For undated references the lat

47、est edition of the publication referred to applies. i1 I 121 i31 i41 i51 i61 i71 i81 i91 ETS 300 121 (1 992): “Integrated Services Digital Network (ISDN); Application of the ISDN User Part (ISUP) of CCITT Signalling System No.7 for international ISDN interconnections (ISUP version 1 1“. ETS 300 356-

48、1 (1 995): “Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 2 for the international interface; Part 1 : Basic services IITU-T Recommendations 0.761 to 0.764 (1 9931, modified“. ETS 300 356-8 (1 995): “Integrated Services Digital Network (ISDN); Signa

49、lling System No.7; ISDN User Part (ISUP) version 2 for the international interface; Part 8: User-to-User Signalling (UUS) supplementary service ITU-T Recommendation (2.737, clause 1 (1 9931, modified“. ETS 300 343 (1 994): “Integrated Services Digital Network (ISDN); Signalling System No.7; Signalling interworking specification for ISDN User Part (ISUP) version 1“. CCITT Recommendation 0. 107 1 988): “Standard sending sequence of forward address information“. ITU-T Recommendation 0.1 15 (1 993): “Control of echo suppressors and echo cancellers by international switching centres

展开阅读全文
相关资源
猜你喜欢
  • CEN TR 14862-2004 Precast concrete products - Full-scale testing requirements in standards on precast concrete products《预制混凝土产品 预制混凝土产品的标准中的全尺寸实样试验要求》.pdf CEN TR 14862-2004 Precast concrete products - Full-scale testing requirements in standards on precast concrete products《预制混凝土产品 预制混凝土产品的标准中的全尺寸实样试验要求》.pdf
  • CEN TR 14920-2005 Jetting resistance of drain and sewer pipes - Moving jet test method《排水和排污管道的抗喷射能力 移动喷射试验法》.pdf CEN TR 14920-2005 Jetting resistance of drain and sewer pipes - Moving jet test method《排水和排污管道的抗喷射能力 移动喷射试验法》.pdf
  • CEN TR 14922-2004 Portable fire extinguishers - Model laboratory - Report in compliance with EN 3-7《手提式灭火器 实验室模型 符合EN 3-7的报告》.pdf CEN TR 14922-2004 Portable fire extinguishers - Model laboratory - Report in compliance with EN 3-7《手提式灭火器 实验室模型 符合EN 3-7的报告》.pdf
  • CEN TR 15003-2012 Durability of wood and wood-based products - Criteria for hot air processes for curative uses against wood destroying organisms《耐用的木材和木制品 标准热空气处理对木材破坏生物治疗使用》.pdf CEN TR 15003-2012 Durability of wood and wood-based products - Criteria for hot air processes for curative uses against wood destroying organisms《耐用的木材和木制品 标准热空气处理对木材破坏生物治疗使用》.pdf
  • CEN TR 15018-2005 Characterization of waste - Digestion of waste samples using alkali-fusion techniques《废弃物特性 通过碱熔融技术进行废弃物样品分类》.pdf CEN TR 15018-2005 Characterization of waste - Digestion of waste samples using alkali-fusion techniques《废弃物特性 通过碱熔融技术进行废弃物样品分类》.pdf
  • CEN TR 15019-2005 Geotextiles and geotextile-related products - On-site quality control《土工织物和土工织物 相关产品 现场质量控制》.pdf CEN TR 15019-2005 Geotextiles and geotextile-related products - On-site quality control《土工织物和土工织物 相关产品 现场质量控制》.pdf
  • CEN TR 15046-2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure《木材防腐剂 先于生物试验的经处理木材的人工老化 紫外线辐射和喷.pdf CEN TR 15046-2005 Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure《木材防腐剂 先于生物试验的经处理木材的人工老化 紫外线辐射和喷.pdf
  • CEN TR 15068-2009 Gas welding equipment - Measurement of noise emitted by blowpipe for welding cutting heating brazing and soldering - Measurement method《气焊设备 对吹管焊接 切割 加热 硬钎焊 软钎焊所发.pdf CEN TR 15068-2009 Gas welding equipment - Measurement of noise emitted by blowpipe for welding cutting heating brazing and soldering - Measurement method《气焊设备 对吹管焊接 切割 加热 硬钎焊 软钎焊所发.pdf
  • CEN TR 15071-2015 Safety of toys - National translations of warnings and instructions for use in the EN 71 series《玩具的安全性 EN71系列使用的警告和说明的国家翻译》.pdf CEN TR 15071-2015 Safety of toys - National translations of warnings and instructions for use in the EN 71 series《玩具的安全性 EN71系列使用的警告和说明的国家翻译》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1