ETSI ETS 300 624-1996 Digital Cellular Telecommunication System (Phase 2) Interworking of GSM Network Management (NM) Procedures and Messages at the Base Station Controller (BSC) (.pdf

上传人:sofeeling205 文档编号:732839 上传时间:2019-01-08 格式:PDF 页数:65 大小:2.95MB
下载 相关 举报
ETSI ETS 300 624-1996 Digital Cellular Telecommunication System (Phase 2) Interworking of GSM Network Management (NM) Procedures and Messages at the Base Station Controller (BSC) (.pdf_第1页
第1页 / 共65页
ETSI ETS 300 624-1996 Digital Cellular Telecommunication System (Phase 2) Interworking of GSM Network Management (NM) Procedures and Messages at the Base Station Controller (BSC) (.pdf_第2页
第2页 / 共65页
ETSI ETS 300 624-1996 Digital Cellular Telecommunication System (Phase 2) Interworking of GSM Network Management (NM) Procedures and Messages at the Base Station Controller (BSC) (.pdf_第3页
第3页 / 共65页
ETSI ETS 300 624-1996 Digital Cellular Telecommunication System (Phase 2) Interworking of GSM Network Management (NM) Procedures and Messages at the Base Station Controller (BSC) (.pdf_第4页
第4页 / 共65页
ETSI ETS 300 624-1996 Digital Cellular Telecommunication System (Phase 2) Interworking of GSM Network Management (NM) Procedures and Messages at the Base Station Controller (BSC) (.pdf_第5页
第5页 / 共65页
点击查看更多>>
资源描述

1、ETS 300 624 August 1996 Source: ETSI TC-SMG Reference: DUSMG-061 222P ICs: 33.060.50 Key words: Digital cellular telecommunications system, Global System for Mobile Communications (GSM) GLOBAL SYSTEM FOR MOBILE COMMUNICATIONS Digital cellular telecommunication system (Phase 2); Interworking of GSM N

2、etwork Management (NM) procedures and messages at the Base Station Controller (BSC) (GSM 12.22) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE

3、X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariatQetsi.fr Tel.: +33 92 94 42 O0 - Fax: +33 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in ail media. O Eu

4、ropean Telecommunications Standards institute 1996. Ail rights reserved. ETSI ETSw300mb24 Yb = 3400855 0333254 157 Page 2 ETS 300 624: August 1996 (GSM 12.22 version 4.1.4) Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or other

5、wise, may occur. If you have comments concerning its accuracy, please write to “ETSI Editing and Committee Support Dept.“ at the address shown on the title page. ETSI ETS*CICI*LZY 76 m 30855 013255 073 rn Page 3 ETS 300 624: August 1996 (GSM 12.22 version 4.1.4) Contents Foreword . 7 Introduction 7

6、1 Scope 9 2 Normative references 9 3 Abbreviations . i . 10 4 Common Interworking aspects 10 4.1 4.2 4.3 4.4 4.5 General considerations 10 4.1.1 Interworking tasks . 10 4.1.2 Mapping between GSM 12.20 specified and GSM 12.21 specified Object Classes 11 4.1.3 Addressing Objects at the BTS Site and ha

7、ndling different BTS configurations 11 CMIP Operations . 11 4.2.1 Creation of BTS related Object instances . 11 4.2.2 Setting attributes of BTS related Objects 12 4.2.3 Getting attributes of BTS related Objects 13 4.2.4 Deletion of BTS related Objects 13 4.2.5 Actions on BTS related Objects 13 4.2.6

8、 Event Reports sent by BTS related Objects 13 4.2.7 CMIS Parameters 14 Error handling 14 State management of BTS related objects 15 4.4.1 Initial states . 15 4.4.2 Setting administrative state . 15 4.4.2.1 Setting administrative state to Unlocked . 16 4.4.2.2 Setting administrative state to Locked .

9、 16 4.4.2.3 Setting administrative state to Shutting Down . 16 4.4.3 4.4.4 Notifications about State Changes 16 Alarm reporting 18 Getting state Attributes 16 5 Specific interworking aspects 21 BasebandTransceiver Object Class 21 5.1.1 information Mapping between GSM 12.20 basebandTransceiver and GS

10、M 12.21 Baseband Transceiver . 21 5.1.1.1 Mapping of Attributes . 21 5.1 . 1 . 2 Mapping of GSM 12.21 Event Reports to GSM 12.20 Notifications . 22 5.1.1.3 Mapping of GSM 12.20 Actions to GSM 12.21 procedures.23 The Specific Interworking Procedures of the basebandTransceiver Object Class . 23 5.1 -2

11、.1 Initialization Procedure for the basebandTransceiver Object Class 23 5.1.2.2 M-DELETE . 25 5.1.2.3 M-SET 25 5.1.2.4 M-GET . 26 5.1.2.5 M-ACTION, forcedHO . 26 BTS Object Class 26 5.2.1 Information Mapping between GSM 12.20 bts Object and GSM 12.21 BTS Object 26 5.2.1.1 Attribute Mapping . 26 5.1

12、5.1.2 5.2 ETSI ETS*300*b24 7b = 3400855 0133256 T2T Page 4 ETS 300 624: August 1996 (GSM 12.22 version 4.1.4) 5.3 5.4 5.5 5.6 5.7 5.2.1.2 Mapping of GSM 12.21 Event Reports to GSM 12.20 Notifications . 28 5.2.1.3 Mapping of GSM 12.20 actions to GSM 12.21 procedures 28 The specific interworking proce

13、dures of the bts Object Class 28 5.2.2.1 Initialization procedure for the bts Object Class 28 5.2.2.2 M-DELETE 30 5.2.2.3 M-SET . 30 5.2.2.4 M-GET 31 5.2.2.5 M.ACTION, forcedHO . 32 5.2.2.6 M.ACTION, channelConfigurationModification . 32 BTS SiteManager Object Class 34 5.3.1 Information mapping betw

14、een GSM 12.20 btsSiteManager and GSM 12.21 Site Manager . 34 5.3.1.1 Mapping of attributes . 34 5.3.1.2 Mapping of GSM 12.21 Event Reports to GSM 12.20 Notifications . 34 The specific interworking procedures of the btsSiteManager Object Class . 35 5.3.2.1 Initialization procedure for the btsSiteMana

15、ger Object Class . 35 5.3.2.2 M-DELETE 37 5.3.2.3 M-SET . 37 M-GET 37 5.3.2.4 Channel Object Class . 37 5.4.1 Information mapping between GSM 12.20 channel and GSM 12.21 Channel 37 5.4.2 Mapping of attributes 37 5.4.2.1 Mapping of GSM 12.21 event reports to GSM 12.20 notifications . 38 The specific

16、interworking procedures of the channel Object Class 38 5.4.3.1 Initialization procedure for the channel Object Class 38 5.4.3.2 M-DELETE 40 5.4.3.3 M-SET . 40 5.4.3.4 M-GET 41 FrequencyHopping System Object Class . 41 Information mapping between GSM 12.20 frequencyHoppingSystem attributes and GSM 12

17、.21 Channel 41 5.5.1.1 Mapping of Attributes 41 The interworking procedures of the frequencyHoppingSystem Object Class . 42 5.5.2.1 Object Class 42 5.5.2.2 M-DELETE 42 5.5.2.3 M-SET . 42 5.5.2.4 M-GET 43 5.2.2 5.3.2 5.4.3 5.5.1 5.5.2 Initialization procedure for the frequencyHoppingSystem LapdLink O

18、bject Class 43 5.6.1 Information mapping between GSM 12.20 IapdLink and GSM 12.21 Objects 43 5.6.1.1 Mapping of attributes . 43 Interworking procedures for the IapdLink Object Class 44 5.6.2.1 Initialization procedure for the lapdlink Object Class . 44 5.6.2.2 M-DELETE 44 5.6.2.3 M-SET . 44 M-GET 44

19、 5.6.2.4 radiocarrier Object Class 45 5.7.1 Information mapping between GSM 12.20 radiocarrier and GSM 12.21 Radio Carrier 45 5.7.1.1 Mapping of attributes . 45 5.7.1.2 Mapping of GSM 12.21 Event Reports to GSM 12.20 notifications . 45 The interworking procedures of the radiocarrier Object Class 46

20、5.7.2.1 The Initialization procedure for the radiocarrier Object Class . 46 5.7.2.2 M-DELETE 47 5.6.2 5.7.2 ETSI ETS*300*624 96 m 3400855 0233257 966 Page 5 ETS 300 624: August 1996 (GSM 12.22 version 4.1.4) 5.7.2.3 M-S ET 47 5.7.2.4 M-GET . 48 5.8 Software Objects . 48 5.8.1 Introduction 48 5.8.2 R

21、eplaceable Software Unit Object Class 49 5.8.2.1 Information mapping between GSM 12.20 replaceableSoftwareUnit and GSM 12.21 objects . 49 5.8.2.1.1 Mapping of attributes 49 5.8.2.2 Interworking procedures 50 5.8.2.2.1 M-CREATE . 50 5.8.2.2.2 M-DELETE 50 5.8.2.2.3 M-SET . 50 5.8.2.2.4 M-GET 50 5.8.3

22、Executable Software Unit Object Class . 51 5.8.3.1 Information mapping between GSM 12.20 executableSoftwareUnit and GSM 12.21 objects 51 5.8.3.2 Interworking procedures 51 5.8.3.2.1 M-CREATE . 51 5.8.3.2.2 M-DELETE 51 5.8.3.2.3 M-SET . 51 5.8.3.2.4 M-GET 51 5.8.4 Operating Software Unit Object Class

23、 . 51 5.8.4.1 Information Mapping between GSM 12.20 operatingSoftwareUnit and GSM 12.21 objects 51 5.8.4.2 Interworking procedures 52 5.8.4.2.1 M-CREATE . 52 5.8.4.2.2 M-DELETE 52 5.8.4.2.3 M-SET . 52 5.8.4.2.4 M-GET 54 6 Related A-Bis Structured Procedures . 54 6.1 LAPD Link Connection . 54 6.2 LAP

24、D Link Disconnection 55 6.3 Software Downloading and Activation . 55 6.3.1 Software Downloading . 55 6.3.2 Software Activation 56 Annex A (informative): Some interworking issues 57 A.l Structured procedures on Q3 Interface . 57 Annex B (informative): Reconfiguration procedures . 58 B.l Assumptions 5

25、8 8.2 Implementation specific issues . 58 B.3 Reconfiguration when BCCH is lost 59 B.4 Reconfiguration when SDCCH is lost 60 Annex C (informative): List of attributes 63 History 65 ETSI ETS*300*624 9b H 3400855 0133258 8T2 Page 6 ETC 300 624: August 1996 (GSM 12.22 version 4.1.4) Blank page ETSI ETS

26、*300*624 96 3400855 0333259 739 Page 7 ETS 300 624: August 1996 (GSM 12.22 version 4.1.4) Foreword This European Telecommunication Standard (ETS) was produced by the Special Mobile Group (SMG) Technical Committee of the European Telecommunications Standards Institute (ETSI). This ETS describes the B

27、SC interworking within the Digital cellular telecommunications system. This ETS corresponds to GSM technical specification, GSM 12.22, version 4.1.4. The specification from which this ETS has been derived was originally based on GSM Phase 1 documentation, hence the presentation of this ETS is not en

28、tirely in accordance with the ETSVPNE rules. NOTE: TC-SMG has produced documents which give technical specifications for the implementation of the Digital cellular telecommunications system. Historically, these documents have been identified as GSM Technical Specifications (GSM-TSs). These specifica

29、tions may subsequently become I-ETSs (Phase i), or European Telecommunication Standards (ETSs)(Phase 2), whilst others may become ETSI Technical Reports (ETRs). These ETSI-GSM Technical Specifications are, for editorial reasons, still referred to in this ETC. Transposition dates Date of adoption of

30、this ETC: Date of latest announcement of this ETS (doa): Date of latest publication of new National Standard or endorsement of this ETS (dop/e): Date of withdrawal of any conflicting National Standard (dow): 06 June 1996 26 September 1996 27 March 1997 27 March 1997 Introduction This ETS is structur

31、ed as follows; 1) Scope; 2) Normative references; 3) Abbreviations; 4) Common interworking aspects; 5) Specific interworking aspects; 6) Related A-bis structured procedures; Annex A (informative) Annex B (informative) Reconfiguration procedures; Annex C (informative) Some interworking issues; List o

32、f attributes. Clause 4 describes the aspects common to all the managed object classes that cause interworking between the Q3 and Qx interfaces. Objects and their naming and addressing on the OMC-BSC and A-bis Qx interfaces are briefly described. General requirements for Q3/Qx interworking for CMIP o

33、perations including error handling are given. Q3/Qx interworking of general functions, .e. state management and alarm reporting, are also specified. Clause 5 specifies the aspects, specific to each object class, that cause interworking. This clause contains the requirements on mapping between the GS

34、M 12.20 specified and GSM 12.21 specified objects, their attributes, and object specific interworking procedures for different CMIP operations. Clause 6 defines the A-bis structured procedures used in clause 3. Annex A describes the structured procedures at a high level which are used in managing th

35、e BTS from the OMC. Annex B contains example procedures for BCCH and SDCCH reconfiguration. Annex C contains the list of GSM 12.20 and GSM 12.21 attributes that are referenced in this specification. ETSI ETS*300*624 96 3400655 0233260 450 Page 8 ETS 300 624: August 1996 (GSM 12.22 version 4.1.4) Bla

36、nk page ETSI ETS*300*624 76 W 3400855 OL332bL 377 Page 9 ETS 300 624: August 1996 (GSM 12.22 version 4.1.4) 1 Scope To ensure management of different manufacturers 6TSs from the OMC through the BSC in a standardized way, this BSC interworking ETS relates the OMC-BSC interface (Q3) as specified in GS

37、M 12.20 and the BSC-BTS interface (A-bis ax) as specified in GSM 12.21. In GSM 12.01 it is required that the BSC performs the Mediation Function between the OMC and the BTS. This ETS defines the requirements for this Mediation Function. 2 Normative references This ETS incorporates by dated and undat

38、ed reference, provisions from other publications. These nonnative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this ETS only when incorporated in

39、 it by amendment or revision. For undated references, the latest edition of the publication referred to applies. 31 t41 51 t71 91 i 31 CCITT Recommendation X.71 O: “Information technology - Open Systems Interconnection - Common Management information Service Definition for CCITT Applications“. CCITT

40、 Recommendation X.711: “Information technology - Open Systems Interconnection - Common Management Information Protocol specification for CCIlT Applications“. CCIlT Recommendation X.721 (IS0 101 65-2): “Information technology - Open Systems Interconnection - Structure of management information: Defin

41、ition Of Management Information“. CCITT Recommendation X.731 (IS0 101 64-2): “Information technology - Open Systems Interconnection - Systems Management: State Management“. CCITT Recommendation X.733 (IS0 101 64-4): “Information technology - Open Systems Interconnection - Systems Management: Alarm R

42、eporting“. CCIlT Recommendation X.734 (IS0 1 O1 64-5): “Information technology - Open Systems Interconnection - Systems Management: Event Report Management Function“. CCIlT Recommendation X.735 (IS0 10164-6): “Information technology - Open Systems Interconnection - Systems Management: Log Control Fu

43、nction“. GSM 04.08 (TS 300 557): “Digital cellular telecommunication system (Phase 2); Mobile radio interface layer 3 specification“. GSM 08.56 (ETS 300 595): “Digital cellular telecommunication system (Phase2); Base Station Controller - Base Transceiver Station (BSC - BTS) interface Layer 2 specifi

44、cation“. GSM 08.58 (ETS 300 596): “Digital cellular telecommunication system (Phase 2); Base Station Controller - Base Transceiver Station (BSC - BTS) interface Layer 3 specification“. GSM 12.00 (ETS 300 612-1): “Digital cellular telecommunication system (Phase 2); Objectives and structure of Networ

45、k Management (NM)“. GSM 12.01 (ETS 300 612-2): “Digital cellular telecommunication system (Phase 2); Common aspects of GSM Network Management (NM)“. GSM 12.20 (ETS 300 622): “Digital cellular telecommunication system (Phase 2); Base Station System (BSS) Management Information“. ETSI ETS*300*624 96 3

46、400855 0333262 223 = Page 10 ETC 300 624: August 1996 (GSM 12.22 version 4.1.4) i 41 GSM 12.21 (ETS 300 623): “Digital cellular telecommunication system (Phase 2); Network Management (NM) procedures and message on the A-bis interface“. 3 Abbreviations Abbreviations used in this ETS are listed in GSM

47、 01.04. 4 Common Interworking aspects 4.1 General considerations 4.1.1 Interworking tasks Figure 1 illustrates differences between Q3 and A-bis Qx interfaces and the object models in the BSC and the BTS. OMC info-modei BSC M: Manager A: Agent Figure 1 : Mapping of information models In the A-bis int

48、erface, layers 1 and 2 are common with telecommunication signalling specified in GSM 08.5X. Network management messages and procedures on the A-bis interface are based on the layer 3 transport mechanism specified in GSM 12.21 and are consistent with the telecommunications signalling on layers 3 as s

49、pecified in GSM 08.58. The protocol profiles for the Q3 interface are specified in GSM 12.01. For network management purposes, the BSC is responsible for the following interworking tasks: - bi-directional protocol conversion so as to provide mapping between Q3 and A-bis Qx interfaces which consists of mapping of GSM 12.20 objects onto GSM 12.21 objects, mapping of CMIS services onto GSMi2.21 procedures and association of GSM 12.20 attributes to GSM 12.21 attributes; - management of interworking functions activated by the OMC and terminated within the BTS and vice versa; - ha

展开阅读全文
相关资源
猜你喜欢
  • DLA SMD-5962-92211 REV A-1996 MICROCIRCUIT DIGITAL FAST CMOS NONINVERTING QUAD 2-INPUT MULTIPLEXER THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLI.pdf DLA SMD-5962-92211 REV A-1996 MICROCIRCUIT DIGITAL FAST CMOS NONINVERTING QUAD 2-INPUT MULTIPLEXER THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLI.pdf
  • DLA SMD-5962-92212 REV A-1996 MICROCIRCUITS DIGITAL FAST CMOS QUAD DUAL-PORT REGISTER TTL COMPATIBLE LIMITED OUTPUT VOLTAGE SWING MONOLITHIC SILICON《硅单片 TTL兼容输入及受输出限制的电压摆幅 双重双口寄存器 .pdf DLA SMD-5962-92212 REV A-1996 MICROCIRCUITS DIGITAL FAST CMOS QUAD DUAL-PORT REGISTER TTL COMPATIBLE LIMITED OUTPUT VOLTAGE SWING MONOLITHIC SILICON《硅单片 TTL兼容输入及受输出限制的电压摆幅 双重双口寄存器 .pdf
  • DLA SMD-5962-92215 REV E-2010 MICROCIRCUIT DIGITAL FAST CMOS OCTAL D-TYPE FLIP-FLOP WITH ASYNCHRONOUS MASTER RESET TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLITHIC.pdf DLA SMD-5962-92215 REV E-2010 MICROCIRCUIT DIGITAL FAST CMOS OCTAL D-TYPE FLIP-FLOP WITH ASYNCHRONOUS MASTER RESET TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLITHIC.pdf
  • DLA SMD-5962-92216 REV C-2010 MICROCIRCUIT DIGITAL FAST CMOS EIGHT INPUT UNIVERSAL SHIFT REGISTER WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MO.pdf DLA SMD-5962-92216 REV C-2010 MICROCIRCUIT DIGITAL FAST CMOS EIGHT INPUT UNIVERSAL SHIFT REGISTER WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MO.pdf
  • DLA SMD-5962-92222 REV C-2008 MICROCIRCUIT DIGITAL FAST CMOS OCTAL D-REGISTERS WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLITHIC SILICON.pdf DLA SMD-5962-92222 REV C-2008 MICROCIRCUIT DIGITAL FAST CMOS OCTAL D-REGISTERS WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLITHIC SILICON.pdf
  • DLA SMD-5962-92223 REV D-2008 MICROCIRCUIT DIGITAL FAST CMOS OCTAL TRANSCEIVER REGISTER WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLITHIC S.pdf DLA SMD-5962-92223 REV D-2008 MICROCIRCUIT DIGITAL FAST CMOS OCTAL TRANSCEIVER REGISTER WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLITHIC S.pdf
  • DLA SMD-5962-92225 REV D-2009 MICROCIRCUIT DIGITAL FAST CMOS 10-BIT BUS INTERFACE D-REGISTERS WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLI.pdf DLA SMD-5962-92225 REV D-2009 MICROCIRCUIT DIGITAL FAST CMOS 10-BIT BUS INTERFACE D-REGISTERS WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOLI.pdf
  • DLA SMD-5962-92228-1994 MICROCIRCUIT DIGITAL FAST CMOS 10-BIT BUS INTERFACE LATCH WITH NONINVERTING THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOL.pdf DLA SMD-5962-92228-1994 MICROCIRCUIT DIGITAL FAST CMOS 10-BIT BUS INTERFACE LATCH WITH NONINVERTING THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MONOL.pdf
  • DLA SMD-5962-92229 REV B-1996 MICROCIRCUIT DIGITAL FAST CMOS 9-BIT BUS INTERFACE D REGISTERS WITH CLOCK ENABLE ASYNCHRONOUS CLEAR THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMI.pdf DLA SMD-5962-92229 REV B-1996 MICROCIRCUIT DIGITAL FAST CMOS 9-BIT BUS INTERFACE D REGISTERS WITH CLOCK ENABLE ASYNCHRONOUS CLEAR THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMI.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1