ETSI ETS 300 656-1997 Broadband Integrated Services Digital Network (B-ISDN) Signalling System No 7 B-ISDN User Part (B-ISUP) Capability Set 1 (CS1) Basic Services (ITU-T Recommend.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 10028-7-2016 en Flat products made of steels for pressure purposes - Part 7 Stainless steels《压力容器钢板 第7部分 不锈钢》.pdf

EN 10029-2010 en Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape《热轧钢板厚3毫米或以上 尺寸和形状公差》.pdf

EN 10031-2003 en Semi-finished products for forging - Tolerances on dimensions shape and mass《锻造用半成品 形状 质量和尺寸公差》.pdf

EN 10034-1993 en Structural Steel I and H Sections - Tolerances on Shape and Dimensions《I型和H型结构钢 形状和尺寸公差》.pdf

EN 10036-1989 en Chemical Analysis of Ferrous Materials Determination of Total Carbon in Steels and Irons Gravimetric After Combustion in a Stream of Oxygen《钢铁材料的化学分析 钢和铁中总含碳量的测定 燃.pdf

EN 1004-2004 en Mobile access and working towers made of prefabricated elements - Materials dimensions design loads safety and performance requirements《预制组件制的移动通道和工作塔 材料 尺寸 设计载荷 安全.pdf

EN 10048-1996 en Hot Rolled Narrow Steel Strip - Tolerances on Dimensions and Shape《热轧钢窄带材 尺寸和外形公差》.pdf

EN 10049-2013 en Measurement of roughness average Ra and peak count RPc on metallic flat products《金属扁平制品的平均粗糙程度Ra和最大数量RPc的测量》.pdf

EN 1005-1-2001 en Safety of machinery - Human physical performance - Part 1 Terms and definitions (Incorporates Amendment A1 2008)《机械安全性 人体物理性能 第1部分 术语和定义》.pdf