1、 ETSI GS OSG 001 V1.1.1 (2012-01) Open Smart Grid Protocol (OSGP) Disclaimer This document has been produced and approved by the Open Smart Grid (OSG) ETSI Industry Specification Group (ISG) and represents the views of those members who participated in this ISG. It does not necessarily represent the
2、 views of the entire ETSI membership. Group Specification ETSI ETSI GS OSG 001 V1.1.1 (2012-01) 2Reference DGS/OSG-001 Keywords protocol, smart meter ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742
3、 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of exist
4、ing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present docum
5、ent should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the follo
6、wing services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2012. All right
7、s reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and o
8、wned by the GSM Association. ETSI ETSI GS OSG 001 V1.1.1 (2012-01) 3Contents Intellectual Property Rights 11g3Foreword . 11g31 Scope 12g32 References 12g32.1 Normative references . 13g32.2 Informative references 13g33 Definitions and abbreviations . 13g33.1 Definitions 13g33.2 Abbreviations . 16g34
9、OSGP operation overview 17g35 OSGP network formation and maintenance . 19g35.1 Discovery Protocol . 19g35.2 Discovery Domain 20g35.3 ADD Proxy Message 20g35.4 ATM Query ID . 20g35.5 ATM Respond to Query . 22g35.6 Signal Strength Values . 22g35.7 Examples 22g35.8 Fast Commission Message (FCM) . 23g35
10、.8.1 Overview 23g35.8.2 FCM message and response description . 23g36 OSGP Device data representation 24g36.1 General overview . 24g36.2 Data Types 25g36.3 Pending tables 26g36.4 Value Control Identifiers (VCI) . 27g36.5 Value 27g36.6 Register Naming Convention . 27g36.7 Table and Procedure Naming Co
11、nventions 27g36.8 Interface Change Alarm (ICA NACK) . 28g37 Security. 28g37.1 OMA key 28g37.2 OSGP Authentication . 29g37.3 OSGP Encryption . 30g37.4 Hardware Lock . 30g38 Device Functional Description for the case the OSGP device is an electric power metering device 31g38.1 General . 31g38.2 Time-O
12、f Use Calendar (Optional) 31g38.2.1 Manual Override Options (optional) . 32g38.2.2 Over Power Threshold Tariff (optional) . 32g38.3 Clock Adjustment (mandatory) 33g38.3.1 Absolute Time Synch 33g38.3.2 Clock Adjustment by Delta . 33g38.4 Billing Functions 33g38.4.1 Self-Reads (mandatory) 33g38.4.2 To
13、tal Energy (optional) . 34g38.4.3 On-Demand Reads of Current Billing Register Values (mandatory) 34g38.5 Load Profile (mandatory) . 34g38.5.1 Use case: Reading Load Profile Data . 34g38.5.2 Use case: Parsing M-Bus Load Profile Data . 35g38.5.2.1 M-Bus Data Types and ET57 35g3ETSI ETSI GS OSG 001 V1.
14、1.1 (2012-01) 48.5.2.2 Load Profile Poll Rate . 36g38.5.2.3 Time Stamping 36g38.5.3 Load Profile Unread Entries Alarm 37g38.6 Self-Test (Alarms, Error Codes) (optional) 37g38.7 Pulse Inputs (optional) 37g38.8 Power Quality (optional) 37g38.8.1 Functional Description 37g38.9 Display (optional) . 39g3
15、8.9.1 Display Sources List (optional) 39g38.9.2 Display Configuration (optional) 41g38.9.3 Error Codes Configuration (optional) . 41g38.9.4 Simulated Wheel Rotation Configuration (optional) 41g38.9.5 Disconnect Configuration (optional 41g38.9.6 CT and VT Ratios (optional) 42g38.9.7 Firmware Version
16、on Power-Up (optional) 42g38.9.8 PLC signal quality Icons (optional) 42g38.9.9 Scheduled Display Messages (optional) . 42g38.10 Load Disconnect Contactor (optional) . 42g38.10.1 Maximum Power and Current Level Thresholds 43g38.10.1.1 Changing the Devices Maximum Power Level Threshold . 43g38.10.1.2
17、Changing the Devices Maximum Current Level Threshold . 44g38.10.1.3 Choosing Power or Current (optional) 44g38.10.2 Prepaid Metering (optional) 44g38.10.3 Local Manual Control (optional) 45g38.10.4 Load Contactor Remote Control (optional) 45g38.11 Control Relay (optional) . 45g38.11.1 Control Relay
18、Randomization. 46g38.11.2 Time-Based Control Relay Calendar 46g38.11.3 Remote Control . 46g38.12 History Log (optional) 47g38.12.1.1 Critical Events (optional) 47g38.12.1.2 Critical Event Categories 47g38.12.1.3 Critical Event Bitmasks . 47g38.12.1.3.1 Example Critical Event Bitmask . 48g38.13 One-T
19、ime Reads (optional) 49g38.14 Group Broadcasts (optional). 49g38.15 Demand Metering (optional) 50g38.15.1 Demand Values (optional) 50g38.15.1.1 Present Demand 50g38.15.1.2 Previous Demand 51g38.15.1.3 Maximum (Peak) Demand 51g38.15.1.4 Coincident Sources 51g38.15.1.5 Cumulative Demand 51g38.15.1.6 C
20、ontinuous Cumulative Demand 51g38.15.1.7 Demand Reset . 51g38.15.1.8 Historical Demand Reset Log . 52g38.15.1.9 Initializing Demand Metering . 52g38.15.1.10 Reconfiguration . 52g38.16 Test Mode . 52g38.17 MEP Device Overview . 53g38.17.1 Downlink Data Transfer . 53g38.17.1.1 Reading Non-Urgent Data
21、. 53g38.17.1.2 Reading and Processing On-Demand Requests 55g38.17.2 Uplink Data Transfer 57g38.17.2.1 Responding to a Scheduled Read Request (With and Without Alarms) . 57g38.17.2.2 Responding to an On-Demand Read Request (With and Without Alarms) 59g38.17.2.3 Posting Unsolicited Non-urgent Data (Wi
22、th and Without Alarms). 61g38.17.2.4 Posting Unsolicited Urgent Data . 62g38.17.2.5 Posting Alarms Only . 63g38.18 M-Bus Device support (optional) . 64g38.18.1 Billing Data Collection . 64g38.18.1.1 On-Demand Reads for M-Bus Devices . 64g3ETSI ETSI GS OSG 001 V1.1.1 (2012-01) 58.18.1.2 Scheduled Rea
23、ds for M-Bus Devices 65g38.18.1.3 One-Time-Reads for M-Bus Devices 66g38.18.1.4 Power Outage Data-Read Interruptions 66g38.18.2 Auto-discovery . 67g38.18.3 Device Removal 67g38.18.4 M-Bus Status and Alarms . 67g38.19 Compatibility Settings (mandatory) . 67g39 Basic OSGP services 68g39.1 Matching of
24、requests and responses . 68g39.2 Buffer sizing restrictions: . 68g39.3 Full Table Read service 68g39.3.1 Request . 68g39.3.2 Full Read Response 69g39.4 Full Table write service 69g39.4.1 Request . 69g39.4.2 Response. 70g39.5 Partial table read . 70g39.5.1 Request . 70g39.5.2 Response. 70g39.6 Partia
25、l table write 71g39.6.1 Request . 71g39.6.2 Response. 71g39.7 Request / Response sequencing 71g39.8 Request / Response OSGP APDU example . 72g39.9 Response error codes 72g39.10 Transactions . 73g39.11 Secure Broadcasts. 74g39.12 Downloading 74g39.13 Procedure invocation 75g39.13.1 Procedure Timing .
26、 76g39.13.2 Slow and Non-Responsive Procedures . 76g3Annex A (normative): Basic Tables 77g3A.1 Basic Table 00 (BT00): General Configuration . 77g3A.2 Basic Table 01 (BT01): General Manufacturer Identification . 84g3A.3 Basic Table 02 (BT02): Device Nameplate 85g3A.4 Basic Table 03 (BT03): End Device
27、 Mode Status . 86g3A.5 Basic Table 04 (BT04): Pending Status . 89g3A.6 Basic Table 05 (BT05): Device Identification . 90g3A.7 Basic Table 06 (BT06): Utility Information . 90g3A.8 Basic Table 07 (BT07): Procedure Initiate . 91g3A.9 Basic Table 08 (BT08): Procedure Response . 91g3A.10 Basic Table 10 (
28、BT10): Dimension Sources Limiting . 92g3A.11 Basic Table 12 (BT12): Unit of Measure Entry . 92g3A.12 Basic Table 13 (BT13): Demand Control 94g3A.13 Basic Table 15 (BT15): Constants . 95g3A.14 Basic Table 16 (BT16): Source Definition . 95g3A.14.1 Measurement Source Definition Records . 96g3A.14.2 Ext
29、ended Source IDs 100g3A.15 Basic Table 20 (BT20): Dimension Register . 101g3A.16 Basic Table 21 (BT21): Actual Register 102g3ETSI ETSI GS OSG 001 V1.1.1 (2012-01) 6A.17 Basic Table 22 (BT22): Data Selection 103g3A.18 Basic Table 23 (BT23): Current Register Data 104g3A.19 Basic Table 24 (BT24): Previ
30、ous Season Data 106g3A.20 Basic Table 25 (BT25): Previous Demand Reset Data 106g3A.21 Basic Table 26 (BT26): Self Read Data . 106g3A.22 Basic Table 27 (BT27): Present Register Selection . 107g3A.23 Basic Table 28 (BT28): Present Register Data . 108g3A.24 Basic Table 30 (BT30): Dimension Display 109g
31、3A.25 Basic Table 33 (BT33): Primary Display List 109g3A.26 Basic Table 50 (BT50): Dimension Time and TOU 110g3A.27 Basic Table 52 (BT52): Clock 111g3A.28 Basic Table 53 (BT53): Time Offset 112g3A.29 Basic Table 54 (BT54): Calendar . 112g3A.30 Basic Table 55 (BT55): Clock state . 114g3A.31 Basic Tab
32、le 60 (BT60): Dimension Load Profile . 115g3A.32 Basic Table 61 (BT61): Actual Load Profile . 116g3A.33 Basic Table 62 (BT62): Load Profile Control 117g3A.34 Basic Table 63 (BT63): Load Profile Status 117g3A.35 Basic Table 64 (BT64): Load Profile Data. 118g3A.36 Basic Table 70 (BT70): Dimension Log
33、120g3A.37 Basic Table 71 (BT71): Actual Log . 120g3A.38 Basic Table 72 (BT72): Events Identification 121g3A.39 Basic Table 73 (BT73): History Log Control . 133g3A.40 Basic Table (BT74): History Log Data 133g3A.41 Basic Table 4150 (BT4150): Pending TOU Calendar . 134g3Annex B (normative): Extended Ta
34、bles . 136g3B.1 Extended Table 00 (ET00) (2048): Manufacturer Specific 136g3B.2 Extended Table 01 (ET01) (2049): Manufacturer Specific 136g3B.3 Extended Table 02 (ET02) (2050): RTC calibration 136g3B.4 Extended Table 03 (ET03) (2051): Utility Information . 136g3B.5 Extended Table 04 (ET04) (2052): S
35、ystem Information 137g3B.6 Extended Table 05 (ET05) (2053): Control Output Settings . 142g3B.7 Extended Table 06 (ET06) (2054): Pulse Inputs 148g3B.8 Extended Table 07 (ET07) (2055): Display Configuration 149g3B.9 Extended Table 08 (ET08) (2056): Measurement Data . 151g3B.10 Extended Table 09 (ET09)
36、 (2057): Power Quality 152g3B.11 Extended Table 10 (ET10) (2058): Internal Power Outages 155g3B.12 Extended Table 11 (ET11) (2059): MFG Dimension 156g3ETSI ETSI GS OSG 001 V1.1.1 (2012-01) 7B.13 Extended Table 12 (ET12) (2060): Daily Consumption 157g3B.14 Extended Table 13 (ET13): M-Bus/MEP Device C
37、onfig 157g3B.15 Extended Table 14 (ET14): M-Bus/MEP Device Status 159g3B.16 Extended Table 15 (ET15): MEP On-demand Requests 162g3B.17 Extended Table 17 (ET17) (2065): Code Bank Info 164g3B.18 Extended Table 18 (ET18) (2066): Manufacturer Specific 165g3B.19 Extended Table 19 (ET19) (2067): Meter One
38、-Time Read Queue 165g3B.20 Extended Table 20 (ET20) (2068): M-Bus One-Time Read Queue 166g3B.21 Extended Table 21 (ET21) (2069): Load Profile Internal Configuration . 167g3B.22 Extended Table 22 (ET22) (2070): Error Codes Configuration . 168g3B.23 Extended Table 23 (ET23) (2071): Meter Internal Use
39、Only 169g3B.24 Extended Table 27 (ET27) (2075): Transaction Request Table . 172g3B.25 Extended Table 28 (ET28) (2076): Transaction Response Table 174g3B.26 Extended Table 29 (ET29) (2077): Hardware Configurations . 174g3B.27 Extended Table 30 (ET30) (2078): Maximum power or current level control 175
40、g3B.28 Extended Table 31 (ET31) (2079): Meter One-Time Read Log 176g3B.29 Extended Table 32 (ET32) (2080): MEP One-Time Read Log . 177g3B.30 Extended Table 33 (ET33) (2081): Group Configuration 179g3B.31 Extended Table 34 (ET34) (2082): MEP Device Configuration 2 . 179g3B.32 Extended Table 35 (ET35)
41、 (2083): Manufacturer Specific 180g3B.33 Extended Table 36 (ET36) (2084): Mfg Actual Dimensions . 181g3B.34 Extended Table 37 (ET37) (2085): Build Information . 182g3B.35 Extended Table 38 (ET38) (2086): Manufacturer Specific 183g3B.36 Extended Table 39 (ET39) (2087): Previous Demand . 183g3B.37 Ext
42、ended Table 40 (ET40) (2088): Demand Configuration . 183g3B.38 Extended Table 41 (ET41) (2089): Historical Demand Reset Log 184g3B.39 Extended Table 42 (ET42) (2090): Interface Definition 185g3B.40 Extended Table 43 (ET43) (2091): Test Mode Configuration . 189g3B.41 Extended Table 44 (ET44) (2092):
43、Test Mode Status 189g3B.42 Extended Table 45 (ET45) (2093): MEP Recurring Read Log 190g3B.43 Extended Table 46 (ET46) (2094): Control Output Read Only Data . 191g3B.44 Extended Table 47 (ET47) (2095): Calendar Override Settings 191g3B.45 Extended Table 48 (ET48) (2096): Feature Activation Table 192g
44、3B.46 Extended Table 49 (ET49) (2097): LCD Output Table . 192g3B.47 Extended Table 50 (ET50) (2098): MEP Inbound Data Space 193g3B.48 Extended Table 51 (ET51) (2099): MEP Device Configuration 194g3B.49 Extended Table 52 (ET52) (2100): MEP Transaction Request Table 195g3B.50 Extended Table 53 (ET53)
45、(2101): MEP Transaction Response Table . 195g3ETSI ETSI GS OSG 001 V1.1.1 (2012-01) 8B.51 Extended Table 54 (ET54) (2102): Meter Status . 196g3B.52 Extended Table 55 (ET55) (2103): Meter Configuration . 198g3B.53 Extended Table 56 (ET56) (2104): Load side state calibration 202g3B.54 Extended Table 5
46、7 (ET57)(2105): M-Bus Data Type Table 203g3B.55 Extended Table 58 (ET58)(2106): MEA Status Extension 204g3B.56 Extended Table 59 (ET59)(2107): MEP Procedure Response . 204g3B.57 Extended Table 60 (ET60) (2108): Configurable Energy Accumulator Settings 205g3B.58 Extended Table 61 (ET61)(2109): Time-B
47、ased Relay Control 205g3B.59 Extended Table 62 (ET62) (2110): Load Profile Display Configuration . 206g3B.60 Extended Table 66 (ET66) (2114): Load Profile Source ID Mapping Table . 208g3B.61 Extended Table 67 (ET67) (2115): Display Source ID Mapping Table 208g3B.62 Extended Table 68 (ET68)(2116): Cr
48、itical Events . 209g3B.63 Extended Table 69 (ET69)(2117): Critical Event Bitmasks 209g3B.64 Extended Table 70 (ET70)(2118): RAM only status . 210g3B.65 Extended Table 71 (ET71) (2119): MEP Delta Data and Config 211g3B.66 Extended Table 1038 (ET1038) (3086): Manufacturer Specific 212g3B.67 Extended T
49、able 4143 (ET4143) (6191): Calendar Override Settings 212g3B.68 Extended Table 4156 (ET4156) (6204): Configurable Energy Accumulator Settings 213g3Annex C (normative): Basic Procedures 214g3C.1 Basic Procedure 04 (BP04): Reset List Pointers 214g3C.2 Basic Procedure 05 (BP05): Update Last Read Entry 214g3C.3 Basic Procedure 06 (BP06): Change Mode 215g3C.4 Basic Procedure 10 (BP10): Set Date and Time 215g3C.5 Basic Procedure 12 (BP12): Activate All Pending Tables . 216g3C.6 Basic Procedure 13 (BP13): Activate Specific Pending Tables . 217g3C.7 Basic Procedure 14 (BP14): Clear A
