ETSI GSM 04 01-1996 Digital Cellular Telecommunications System Mobile Station - Base Station System (MS - BSS) Interface General Aspects and Principles (GSM 04 01)《数字蜂窝通信系统 移动站-基站子_1.pdf

上传人:fatcommittee260 文档编号:733736 上传时间:2019-01-08 格式:PDF 页数:13 大小:383.79KB
下载 相关 举报
ETSI GSM 04 01-1996 Digital Cellular Telecommunications System Mobile Station - Base Station System (MS - BSS) Interface General Aspects and Principles (GSM 04 01)《数字蜂窝通信系统 移动站-基站子_1.pdf_第1页
第1页 / 共13页
ETSI GSM 04 01-1996 Digital Cellular Telecommunications System Mobile Station - Base Station System (MS - BSS) Interface General Aspects and Principles (GSM 04 01)《数字蜂窝通信系统 移动站-基站子_1.pdf_第2页
第2页 / 共13页
ETSI GSM 04 01-1996 Digital Cellular Telecommunications System Mobile Station - Base Station System (MS - BSS) Interface General Aspects and Principles (GSM 04 01)《数字蜂窝通信系统 移动站-基站子_1.pdf_第3页
第3页 / 共13页
ETSI GSM 04 01-1996 Digital Cellular Telecommunications System Mobile Station - Base Station System (MS - BSS) Interface General Aspects and Principles (GSM 04 01)《数字蜂窝通信系统 移动站-基站子_1.pdf_第4页
第4页 / 共13页
ETSI GSM 04 01-1996 Digital Cellular Telecommunications System Mobile Station - Base Station System (MS - BSS) Interface General Aspects and Principles (GSM 04 01)《数字蜂窝通信系统 移动站-基站子_1.pdf_第5页
第5页 / 共13页
点击查看更多>>
资源描述

1、GSM - Mobile Station - Base Station System (MS - BSS) interface; General aspects and principles (GSM 04.01) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbon

2、ne - FRANCE X.400: c=fr, a=atlas, p=etsi, ssecretariat - Internet: secretariatetsi.fr Tel.: +33 4 92 94 42 O0 - Fax: +33 4 93 65 47 16 Copyright Notification: No pari may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in a

3、ll media. 6 European Telecommunications Standards Institute 1996. All rights resewed. _ - STD-ETSI GSM Oq-OL-ENGL L77b m 3400855 15722b 532 m Page 2 GSM 04.01 version 5.0.0: November 1996 Whilst every care has been taken in the preparation and publication of this document, errors in content, typogra

4、phical or otherwise, may occur. If you have comments concerning its accuracy, please write to “ETSI Editing and Committee Support Dept.“ at the address shown on the title page. STD-ETSI GSM ULi*IL-ENGL 177b = 3LiU0855 0357227 Li77 Page 3 GSM 04.01 version 5.0.0: November 1996 Contents Foreword . 5 O

5、 1 2 3 4 5 6 7 Scope 7 0.1 Normative references 7 0.2 Abbreviations . 8 General 8 Access by a standard set of interfaces at a MS . 8 Principles and procedures for the man-machine interface (MMI) to the MS . 8 Interface applications 8 1.1 1.2 1.3 Basic interfaces for user access for a GSM PLMN . 8 In

6、terface technical specification objectives . 9 Interface characteristics 9 Interface capabilities 10 Technical Specifications on GSM MS-BSS interfaces 10 6.1 Reference configurations . 10 6.2 Channel structures and access capabilities . 10 6.3 MS-BSS interface as defined in GSM 04.04 through GSM 04.

7、12 . 10 Protocol modelling principles . 10 7.1 7.2 7.3 Signalling on the MS-BSS interface . 11 7.4 Service primitives . 11 Signalling protocols on the MS-BSS Interface . 10 The basic structuring technique in the OS1 reference model . 10 History 13 STD-ETSI GSM OLi-OL-ENGL L77b U 3400855 0357228 305

8、Page 4 GSM 04.01 version 5.0.0: November 1996 Blank Page STD-ETSI GSM 09.OL-ENGL L77b m 3900855 0359229 241 m Page 5 GSM 04.01 version 5.0.0: November 1996 Foreword . This Global System for Mobile communications Technical Specification (GTS) has been produced by the Special Mobile Group (SMG) Techni

9、cal Committee (TC) of the European Telecommunications Standards Institute (ETSI). This GTS defines the general aspects of the Mobile Station - Base Station System (MS - BSS) interface within the digital cellular telecommunications system. The contents of this GTS are subject to continuing work withi

10、n TC-SMG and may change following formal TC-SMG approval. Should TC-SMG modify the contents of this GTS it will then be republished by ETSI with an identifying change of release date and an increase in version number as follows: Version 5.x.y where: y the third digit is incremented when only editori

11、al changes have been incorporated in the specification; x the second digit is incremented for ail other types of changes, .e. technical enhancements, corrections, updates, etc. STD-ETSI GSM Oq*OL-ENGL L99b = 3q00855 0359230 Tb3 Page 6 GSM 04.01 version 5.0.0: November 1996 Blank Page STD-ETSI GSM OY

12、*OL-ENGL 377b m 3400855 0357233 7TT m Page 7 GSM 04.01 version 5.0.0: November 1996 O Scope This Global System for Mobile communications Technical Specification (GTS) describes the general aspects and principles relating to the Technical Specifications for the GSM Mobile Station - Base Station Syste

13、m (MS-BSS) interface. 0.1 Normative references This GTS incorporates by dated and undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments t

14、o or revisions of any of these publications apply to this GTS only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. 141 t51 11 21 i 31 11 41 GSM O1 .O4 (ETR 350): “Digital cellular telecommunications system (Phase 2+

15、); Abbreviations and acronyms“. GSM 02.30 (ETC 300 907): “Digital cellular telecommunications system (Phase 2+); Man-Machine Interface (MMI) of the Mobile Station (MS)“. GSM 04.02: “Digital cellular telecommunications system (Phase 2+); GSM Public Land Mobile Network (PLMN) access reference configur

16、ation“. GSM 04.03: “Digital cellular telecommunications system (Phase 2+); Mobile Station - Base Station System (MS - BSS) interface Channel structures and access capabilities“. GSM 04.04 (ETS 300 936): “Digital cellular telecommunications system; layer 1 General requirements“. GSM 04.05 (ETS 300 93

17、7): “Digital cellular telecommunications system; Data Link (DL); layer General aspects“. GSM 04.06 (ETS 300 938): “Digital cellular telecommunications system; Mobile Station - Base Station System (MS - BSS) interface Data Link (DL) layer specification“. GSM 04.07 (ETS 300 939): “Digital cellular tel

18、ecommunications system (Phase 2+); Mobile radio interface signalling layer 3; General aspects“. GSM 04.08 (ETS 300 940): “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 specification“. GSM 04.1 O (ETS 300 941): “Digital cellular telecommunications system; Mobil

19、e radio interface layer 3; Supplementary services specification; General aspects“. GSM 04.1 1 (ETS 300 942): “Digital cellular telecommunications system (Phase 2+); Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface“. GSM 04.1 2 (ETS 300 943): “Digital cellular telecom

20、munications system (Phase 2+); Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface“. CCITT Recommendation X.200: “Reference Model of Open Systems Interconnection for CCITT Applications“; CCITT Recommendation X.21 O: “Open Systems Interconnection layer service definitio

21、n conventions“. STD-ETSI GSM OY*OL-ENGL L77b 3400855 0157232 83b Page 8 GsM 04.01 version 5.0.0: November 1996 O2 Abbreviations Abbreviations used in this specification are listed in GSM 01.04. 1 General 1 .I Access by a standard set of interfaces at a MS A GSM PLMN supports a wide range of services

22、 which a user accesses by a standard set of interfaces at a MS. The MS is connected to the PLMN fixed infrastructure via a radio path to a base station, as shown in figure 1. 1.2 Basic interfaces for user access for a GSM PLMN The MS-BSS interface on this radio path is specified in the 04-series of

23、Technical Specifications in such a way as to permit user and network technologies and configurations to evolve separately. MY1 T-t-r-f radio path infrastructure interface (04 series) Figure 1 : Basic interfaces for user access for a GSM PLMN 1.3 Principles and procedures for the man-machine interfac

24、e (MMI) to the MS The principles and procedures for the man-machine interface (MMI) to the MS are described in GSM 02.30. The user may also use standard terminal interfaces within the MS. The reference configuration for the access is described in GSM 04.02. 2 Interface applications Figure 2 shows so

25、me examples of the application of GSM MS-BSS interfaces. The following cases are shown: i) access of simple handportable or vehicle mounted MSs; i) iii) access of an MS with multiple terminal equipment installation; access of a mobile PBX or LAN; In addition, the figure identifies internetwork inter

26、faces for connections to: iv) land-line ISDN networks; v) dedicated service networks. STD-ETSI GSM 04.03-ENGL L77L W 3400855 0357233 772 Simple MS Page 9 GSM 04.01 version 5.0.0: November 1996 - Dedicated lx - Mobile I PBX“ 1 or LAN service network MS-BSS interface Fixed network - GSM network interf

27、ace e MS with multiple term inal equipment * This case has not been specified yet. GSM network Figure 2: Examples of GSM interfaces 3 Interface technical specification objectives MS-BSS interface Technical Specifications should allow: i) i) different types of MSs and terminal equipment to use the sa

28、me standard interface; portability of MSs within the system area of the GSM system; iii) iv) v) separate evolution of both MSs and network equipment technologies and configurations; calls to a terminal using the same code (call number) no matter in what country it is actually located; connections of

29、 an MS to the ISDN network so that only the radio channel capacity and the ISDN protocol are limiting factors. 4 Interface characteristics The MS-BSS interface is specified by a comprehensive set of characteristics, including: i) channel structures and access capabilities; i) user-network (MS-BSS) p

30、rotocols; iii) maintenance and operation characteristics; iv) performance characteristics; v) service characteristics. - _ STDmETSI GSM O4-OL-ENGL L79b m 3400855 0159234 b07 m Page 10 GSM 04.01 version 5.0.0: November 1996 5 Interface capabilities I In addition to the multiservice capability, the GS

31、M MS-BSS interface may allow for capabilities such as the following: i) multidrop and other multiple terminal arrangements; i) choice of information bit rate, circuit or packet switching mode, layer 2 coding method, etc ., on a call-by-call or other basis (e.g. semipermanent, or subscription time op

32、tion), over the same interface according to the users need; iii) capability for compatibility checking in order to check whether calling and called terminals can communicate with each other. 6 Technical Specifications on GSM MS-BSS interfaces 6.1 Reference configurations I i The reference configurat

33、ions for the GSM MS-BSS interface define the terminology for various reference points. GSM 04.02 contains the GSM PLMN access reference configuration. l l Channel structures and access capabilities 6.2 GSM 04.03 defines the channel structures and access capabilities for the MS-BSS interface. A disti

34、nction is necessary between the logical channel structure supported by the interface and the access capability supported by the radio path of the system. 6.3 MS-BSS interface as defined in GSM 04.04 through GSM 04.12 The MS-BSS interface as defined in GSM 04.04 through GSM 04.12 is applicable to a w

35、ide range of situations. 7 Protocol modelling principles 7.1 The signalling protocols on the MS-BSS Interface are specified using the concepts of the reference model of Open System Interconnection (OSI) given in CCIlT Recommendations X.200 and X.210. Signalling protocols on the MS-BSS Interface 7.2

36、The basic structuring technique in the OS1 reference model The basic structuring technique in the OS1 reference model is layering. According to this technique, communication among application processes is viewed as being logically partitioned into an ordered set of layers represented in a vertical s

37、equence as shown in figure 3. Highest layer 1 (N + 1)-layer (N)-layer (N - 1)-layer I Lowest layer I Figure 3: Layering Entities exist in each layer. Entities in the same layer, but in different systems which must exchange information to achieve a common objective are called “peer entities”. Entitie

38、s in adjacent layers interact through their common boundary. The services provided by the (N + 1)-layer are the combination of the services and functions provided by the (N)-layer and all layers below the (N)-layer. - STD-ETSI GSM 04.OL-ENGL L7Sb U 3400855 0357235 545 m Page 11 GSM 04.01 version 5.0

39、.0: November 1996 Request Indication I I I Confirm t Management functions may also be required. They may include functions which are common for several layers and are not supported by the services provided by a specific layer. Examples of such functions are error reporting, status reporting and mana

40、gement of the operation of certain layers. Such management functions do not require that peer-to-peer messages are sent across the MS-BSS interface. Response 1 i 7.3 For signalling on the MS-BSS interface three layers are required as shown in figure 4. Signalling on the MS-BSS interface Layer 3 t Da

41、ta link layer Physical layer Figure 4: Layering on the MS-BSS interface The layers are: - PHYSICAL LAYER which corresponds to the lowest layer. The functions and protocols of the physical layer are defined in GSM 04.04. DATA LINK LAYER. The functions and protocols of the data link layer are defined

42、in GSM 04.05 and GSM 04.06. - - LAYER 3. The functions and protocols of layer 3 are defined in GSM 04.07, GSM 04.08, GSM 04.10, GSM 04.11 and GSM 04.12. 7.4 Service primitives Layer-to-layer interactions are specified in terms of service primitives. The primitives represent, in an abstract way, the

43、logical exchange of information and control between adjacent layers. They do not specify or constrain implementation. Primitives are also used to describe information exchange between layers and the mobile management entity. Figure 5: Primitive action sequence for peer-to-peer communication The REQU

44、EST primitive type is used when a higher layer is requesting a service from the next lower layer. STD-ETSI GSM OLi-01-ENGL 199b 3LiOO855 OL5923b 481 = I Page 12 GSM 04.01 version 5.0.0: November 1996 The INDICATION primitive type is used by a layer providing a service to notify the next higher layer

45、 of activities related to the primitive type REQUEST. The RESPONSE primitive type is used by a layer to acknowledge receipt, from a lower layer, of the primitive type INDICATION. The CONFIRM primitive type is used by the layer providing the requested service to confirm that the activity has been completed. Page 13 GSM 04.01 version 5.0.0: November 1996 November 1996 History Publication of version 5.0.0 (based on version 4.0.4) ISBN 2-7437-1 139-6 Dpt lgal : Novembre 1996

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1