1、 STDeETSI GSM OB=Oh-ENGL 3978 3400855 0337205 337 GSM T I ECHNICAL n SPECIFICATION GSM 08.06 May 1998 Version 5.2.0 Source: SMG Reference: RGTS/SMG-O30806QRl ICs: 33.020 Key words: Digital cellular telecommunications system, Global System for Mobile communications (GSM) Digital cellular telecommunic
2、ations system (Phase 2+); Signalling transport mechanism specification for the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface (GSM 08.06 version 5.2.0) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-O6921 Sophia Antipolis CEDEX -
3、 FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE Internet: secretariat Qetsi.fr - http:/www.etsi.fr - http:/www.etsi.org Tel .: +33 4 92 94 42 O0 - Fax: +33 4 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission
4、. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards institute 1998. All rights reserved. STDmETSI GSM OB-Ob-ENGL I1908 = 3400855 33L720b 075 Page 2 GSM 08.06 version 5.2.0: May 1998 Whilst every care has been taken in the prepara
5、tion and publication of this document, errors in content, typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to “ETSI Editing and Committee Support Dept.“ at the address shown on the title page. STD-ETSI GSM O8.Ob-ENGL 1998 m 3400855 0337207 TO1 m Page
6、3 GSM 08.06 version 5.2.0: May 1998 Contents Foreword 5 O Scope 7 Normative references .7 Abbreviations . .-._ 1 O o . 1 0.2 1 Field of application 10 2 Functional content . 11 3 Message transfer part (MTP) functions 11 3.1 General 11 3.2 3.3 3.4 3.5 Level 1 (CCITT Recommendation (2.702) . 11 Level
7、2 (CCITT Recommendation (2.703) . 12 Level 3 (CCITT Recommendation Q.704) . 13 Testing and Maintenance (CCITT Recommendation Q.707) 16 4 Interface functions . 17 5 SCCP functions ._. . 17 5.1 Overview . . 17 5.2 Primitives (CCITT Recommendation (2.71 1) . 17 5.3 SCCP messages (CCITT Recommendation Q
8、.712) . 18 5.4 SCCP formats and codes (CCITT Recommendation Q.713) 19 5.5 SCCP procedures (Q.714) . 20 6 Use of the SCCP . 21 6.1 Connection establishment . 22 Establishment procedure in case i) . 24 6.1.1 6.1.2 Establishment procedure in case i) 24 6.1.3 Establishment procedure in case iii) 24 6.1.
9、4 Establishment procedure in case iv) . 25 Transfer of DTAP and BSSMAP data 25 6.3.1 Distribution function . 26 6.3.2 Transfer of DTAP messages . 26 6.3.3 Transfer of BSSMAP messages . 27 6.4 Connectionless services . 72 6.2 Connection release 25 6.3 7 Use of the SCCP for operations and maintenance
10、. 28 7.1 Connectionless service . 28 7.2 Connection oriented services . 28 7.3 BSS failure 28 Annex A (informative): Document change history . .- 29 History . 30 STD-ETSI GSM OB-Ob-ENGL 3778 D 3400855 0337208 948 Page 5 GSM 08.06 version 5.2.0: May 1998 Foreword This Global System for Mobile communi
11、cations Technical Specification (GTS) has been produced by the Special Mobile Group (SMG) of the European Telecommunications Standards Institute (ETSI). This GTS provides a mechanism giving reliable transfer of signalling messages within the digital cellular telecommunications system. The contents o
12、f this GTS are subject to continuing work within SMG and may change following formal SMG approval. Should SMG modify the contents of this GTS it will then be republished by ETSI with an identifying change of release date and an increase in version number as follows: Version 5.x.y where: y the third
13、digit is incremented when editorial only changes have been incorporated in the specification; x the second digit is incremented for all other types of changes, .e. technical enhancements, corrections, updates, etc. Previous page is blank STD-ETSI GSM OB-Ob-ENGL 1998 m 3400855 0337209 884 m Page 7 GS
14、M 08.06 version 5.2.0: May 1998 O Scope This Technical Specification is divided split into two parts, Chapters 1-4 dealing with the MTP and chapters 5-7 dealing with the SCCP and its use. The MTP provides a mechanism giving reliable transfer of signalling messages. Chapters 1-4 of this Technical Spe
15、cification deals with the subset of the MTP that can be used between an BSS and an MSC, which is compatible with a full MTP. The SCCP is used to provide a referencing mechanism to identify a particular transaction relating to for instance a particular call. Chapters 5-7 identify the SCCP subset that
16、 should be used between a BSS and an MSC. The SCCP can also be used to enhance the message routing for (for instance) operations and maintenance information. o. 1 Normative references This ETS incorporates by dated and undated reference, provisions from other publications. These normative references
17、 are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this ETS only when incorporated in it by amendment or revision. For undated references, the latest edition of
18、the publication referred to applies. 31 GSM O1 .O4 (ETR 350): “Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms“. GSM 02.01: “Digital cellular telecommunications system (Phase 2+); Principles of telecommunications services supported by a GSM Public Land Mobile Networ
19、k (PLMN)“. GSM 02.02 (ETC 300 904): “Digital cellular telecommunications system (Phase2+); Bearer Services (BS) supported by a GSM Public Land Mobile Network (PLMN)“. GSM 02.03 (ETC 300 905): “Digital cellular (Phase 2+); Teleservices supported by a GSM (PLMN)“. GSM 02.04 (ETS 300 918): “Digital cel
20、lular (Phase 2+); General on supplementary services“. GSM 02.06 (ETC 300 919): “Digital cellular (Phase 2+); Types of Mobile Stations (MS)“. GSM 02.07 (ETS 300 906): “Digital cellular (Phase 2+); Mobile Stations (MS) features“. GSM 02.09 (ETS 300 920): “Digital cellular (Phase 2+); Security aspects“
21、. GSM 02.1 1 (ETS 300 921): “Digital cellular (Phase 2+); Service accessibility“. telecommunications system Public Land Mobile Network telecommunications telecommunications telecommunications telecommunications telecommunications system system system system system GSM 02.16: “Digital cellular teleco
22、mmunications system (Phase 2+); International Mobile station Equipment Identities (IMEI)“. GSM 02.17 (ETS 300 922): “Digital cellular telecommunications system (Phase 2+); Subscriber Identity Modules (SIM) Functional characteristics“. GSM 02.24 (ETC 300 923): “Digital cellular telecommunications sys
23、tem (Phase 2+); Description of Charge Advice Information (CAI)“. - STDnETSI GSM OB-Ob-EHGL L998 3400855 0337230 5Tb Page 8 GSM 08.06 version 5.2.0: May 1998 i 31 GSM 02.30 (ETS 300 907): “Digital cellular telecommunications system (Phase 2+); Man-Machine Interface (MMI) of the Mobile Station (MS)“.
24、i 41 GSM 02.40: “Digital cellular telecommunications system (Phase 2+); Procedures for call progress indications“. GSM 02.41 : “Digital cellular telecommunications system (Phase 2+); Operator determined barring“. GSM 02.81: “Digital cellular telecommunications system (Phase 2+); Line identification
25、Supplementary Services - Stage 1“. (1 71 GSM 02.82: “Digital cellular telecommunications system (Phase 2+); Call Forwarding (CF) Supplementary Services - Stage 1“. GSM 02.83: “Digital cellular telecommunications system (Phase 2+); Call Waiting (CW) and Call Hold (HOLD) Supplementary Services - Stage
26、 1“. GSM 02.84: “Digital cellular telecommunications system (Phase 2+); MultiParty (MPTY) Supplementary Services - Stage 1“. GSM 02.85: “Digital cellular telecommunications system (Phase 2+); Closed User Group (CUG) Supplementary Services - Stage 1“. GSM 02.86: “Digital cellular telecommunications s
27、ystem (Phase 2+); Advice of Charge (AOC) Supplementary Services - Stage 1“. GSM 02.88: “Digital cellular telecommunications system (Phase 2+); Call Barring (CB) Supplementary Services - Stage 1“. GSM 04.01 : “Digital cellular telecommunications system (Phase 2+): Mobile Station - Base Station System
28、 (MS - BSS) interface; General aspects and principles“. GSM 04.02: “Digital cellular telecommunications system (Phase 2+); GSM Public Land Mobile Network (PLMN) access reference configuration“. GSM 04.03: “Digital cellular telecommunications system (Phase 2+); Mobile Station - Base Station System (M
29、S - BSS) interface; Channel structures and access capabilit es“. GSM 04.04 (ETS 300 936): “Digital cellular telecommunications system (Phase 2+); layer 1 ; General requirements“. GSM 04.05 (ETS 300 937): “Digital cellular telecommunications system (Phase 2+); Data Link (DL) layer; General aspects“.
30、GSM 04.06 (ETS 300 938): “Digital cellular telecommunications system (Phase 2+); Mobile Station - Base Station System (MS - BSS) interface; Data Link (DL) layer specification“. GSM 04.07 (ETS 300 939): “Digital cellular telecommunications system (Phase 2+): Mobile radio interface signalling layer 3;
31、 General aspects“. GSM 04.08 (ETS 300 940): “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 specification“. GSM 04.10 (ETS 300 941): “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3; Supplementary services specification: Ge
32、neral aspects“. STD-ETSI GSM OB=Ob-ENGL 3998 3400855 0337233 432 Page 9 GSM 08.06 version 5.2.0: May 1998 i321 i331 i371 GSM 04.1 1 (ETS 300 942): “Digital cellular telecommunications system (Phase 2+); Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface“. GSM 04.12 (ET
33、S 300 943): “Digital cellular telecommunications system (Phase 2+); Short Message Service Cell Broadcast (SMSCB) support on the mobile radio interface“. GSM 04.13 (ETS 300 944): “Digital cellular telecommunications system (Phase 2+); Performance requirements on mobile radio interface“. GSM 04.21 (ET
34、S 300 945): “Digital cellular telecommunications system (Phase 2+); Rate adaption on the Mobile Station - Base Station System (MS - BSS) interface“. GSM 04.22 (ETS 300 946): “Digital cellular telecommunications system (Phase 2+); Radio Link Protocol (RLP) for data and telematic services on the Mobil
35、e Station - Base Station System (MS - BSS) interface and the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface“. GSM 04.80 (ETS 300 950): “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 supplementary services specification; Formats an
36、d coding“. GSM 04.81 (ETS 300 951): “Digital cellular telecommunications system (Phase 2+); Line identification supplementary services - Stage 3“. GSM 04.82 (ETS 300 952): “Digital cellular telecommunications system (Phase 2+); Call Forwarding (CF) supplementary services - Stage 3“. GSM 04.83 (ETS 3
37、00 953): “Digital cellular telecommunications system (Phase 2+); Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 3“. GSM 04.84 (ETS 300 954): “Digital cellular telecommunications system (Phase 2+); MultiParty (MPTY) supplementary services - Stage 3“. GSM 04.85: “Digital cellula
38、r telecommunications system (Phase 2+); Closed User Group (CUG) supplementary services - Stage 3“. GSM 04.86 (ETS 300 955): “Digital cellular telecommunications system (Phase 2+); Advice of Charge (AOC) supplementary services - Stage 3“. GSM 04.88 (ETS 300 956): “Digital cellular telecommunications
39、system (Phase 2+); Call Barring (CB) supplementary services - Stage 3“. GSM 04.90 (ETS 300 957): “Digital cellular telecommunications system (Phase 2+); Unstructured Supplementary Service Data ( USSD) - Stage 3“. GSM 08.08: “Digital cellular telecommunications system (Phase 2+); Mobile Switching Cen
40、tre - Ease Station System (MSC - BSS) interface; Layer 3 specification: GSM 12.00 (ETS 300 61 2-1): “Digital cellular telecommunications system (Phase 2); Objectives and structure of Network Management (NM)“. GSM 12.01 (ETS 300 612-2): “Digital cellular telecommunications system (Phase 2); Common as
41、pects of GSM Network Management (NM)“. GSM 12.02 (ETS 300 61 3): “Digital cellular telecommunications system (Phase 2); Subscriber, Mobile Equipment (ME) and services data ad m i n i s t ra t io n I. STD.ETSI GSM OB-0b-ENGL 3998 W 3400855 0337232 379 Page 10 GSM 08.06 version 5.2.0: May 1998 GSM 12.
42、03 (ETS 300 61 4): “Digital cellular telecommunications system (Phase 2); Security management“. 1511 GSM 12.04 (ETS 300 61 5): “Digital cellular telecommunications system (Phase 2); Performance data measurements“. GSM 12.05 (ETS 300 61 6): “Digital cellular telecommunications system (Phase 2); Subsc
43、riber related event and call data“. GSM 12.06 (ETS 300 61 7): “Digital cellular telecommunications system (Phase 2); GSM Network change control“. i541 GSM 12.1 1 (ETS 300 619): “Digital cellular telecommunications system (Phase 2); Maintenance of the Base Station System (BSS)“. GSM 12.20 (ETS 300 62
44、2): “Digital cellular telecommunications system (Phase 2); Network Management (NM) procedures and messages“. GSM 12.21 (ETS 300 623): “Digital cellular telecommunications system (Phase 2); Network Management (NM) procedures and message on the A-bis interface“. GSM 12.22 (ETS 300 624): “Digital cellu
45、lar telecommunications system (Phase 2); Interworking of GSM Network Management (NM) procedures and messages at the Base Station Controller (BSC)“. CCITT Recommendation Q.702: “Specifications of Signalling System No. 7 - Signalling data link“. i591 CCITT Recommendation Q .703: “Signal ling link“ 160
46、1 CCITT Recommendation Q.704: “Signalling network functions and messages“. CCITT Recommendation Q.707: “Specifications of Signalling System No. 7 - Testing and maintenance“. CCITT Recommendation (2.71 1 : “Functional description of the signalling connection control part“. e31 CCITT Recommendation Q.
47、712: “Definition and function of SCCP messages“. 1641 CCITT Recommendation (2.713: “SCCP formats and codes“. CCITT Recommendation (2.714: “Signalling connection control pari procedures“. GSM 03.03: “Digital Digital cellular telecommunications system (Phase 2+); Numbering, addressing and identificati
48、on“. 0.2 Ab brevl atlons Abbreviations used in this specification are listed in GSM O1 .O4 1 Field of application a) This Technical Specification is applicable to the signalling between radio subsystems (BSS) and mobile switching centres (MSCs) in GSM PLMNs. It provides a minimum set of MTP requirem
49、ents that may be implemented at a BSS or MSC, whilst maintaining compatibility with the implementation of a full specification of the MTP. Page 11 GCM 08.06 version 5.2.0: May 1998 The Technical Specification defines the interface at the 64 Wbit boundary to the BSS or MSC and applies primarily for digital access arrangements, the use of analogue arrangements is a national concern. The security of signalling links is a national concern, however it is recommended that in the case where more than one multiplex system is required and security reasons dictate the use
