1、ETSI GSM*:lL-ZZ 94 = 3400855 0003828 9T7 ETS I-G S M Tec hn cal Report GSM 11.22 Version: 4.0.0 Date: June 1994 Key words: European Digital Cellular Telecommunications System, Global System for Mobile Communications (GSM). European Digital Cellular Telecommunications Systems Base Station and Ancilla
2、ry Equipment Physical and electrical parameters Application of standards and guidance notes ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: 06921 Sophia Antipolis Cedex - FRANCE Office address: Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE Tel.: +33
3、92 94 42 O0 - Fax: +33 93 65 47 16 This is an unpublished work the copyright in which vests in the European Telecommunications Standards Institute. All rights reserved. The information contained herein is the property of ETSI and no part may be reproduced or used except as authorised by contract or
4、other written permission. The copyright and the foregoing restriction on reproduction and use extend to all media in which the information may be embodied. ETSI GSMULL.22 74 m 3400855 0003829 833 m Page 3 GSM 1 1.22 v.4.0.0: June 1994 Contenta Foreword . 5 1 scope 7 2 Normative references 7 3 Defini
5、tions . 12 3.1 3.3 Base Station System 12 3.2 Co-located equipment . 12 Weather protected locations (ETC 300 019-1-3) . 12 3.3.1 Totally weather protected locations 12 3.3.2 Partially weather protected locations 12 Non Weather protected locations (ETS 300 01414) 12 3.4 4 Abbreviations 13 5 Product R
6、equirement Ovenriew . 13 6 Equipment sites and installations . 13 6.1 Weather protected sites 14 6.2 6.3 Non-weather protected sites . 14 ETSI defined locations 14 6.3.1 Stationary use at weather protected locations 14 6.3.1.1 Class 3.1 : Temperature controlled locations 15 6.3.1.2 Class 3.2: Partly
7、 temperature controlled 15 6.3.1.3 Class 3.3: Not temperature controlled . 15 6.3.1.4 6.3.1.5 Class 3.5: Sheltered locations . 15 Stationary use at non-weather protected locations . 16 6.3.2.1 6.3.2.2 Class 4.1 E: Non-weather protected locations . extended . 16 Class 3.4: Sites with heat traps . 15
8、Class 4.1 : Non-weather protected locations . 16 6.3.2 7.2 7.3 7.4 7.5 7.6 7 General applicable specifications and guidance notes . 17 7.1 Acoustic noise 17 7.1.1 Acoustic noise limits for weather protected. partly temperature controlled environments . 17 7.1.2 Acoustic noise limits for non-weather
9、protected environments 17 Construction . 18 7.2.1 For Stationary Use At Weather Protected Locations 18 7.2.2 Earthing And Bonding . 18 Environmental conditions 18 7.4.1 Equipment in use conditions 18 7.4.2 Earthquake Conditions . 19 7.4.3 Storage . 19 7.4.4 Transportation . 19 7.4.5 Underground Cond
10、itions 20 Lightning Protection 20 7.5.1 Equipment . 20 7.5.2 Structures 20 Power Supplies . 20 7.6.1 AC Power Supply conditions for Base Stations, Base Station Controllers . 20 DC Power Supply conditions for Base Stations, Base Station Controllers . 21 For Stationary Use At Non-Weather Protected Loc
11、ations . 18 7.6.1.1 Single Phase . 20 7.6.1.2 Three Phase . 21 7.6.2 Previous page is blank Pane 4 . . GSIM i i .a 11.4.0.0: JUW i w 7.7 ReliabilRy/DependabiIity . 21 Specific applicable specifications and guidance notes for product release to the operator . 22 8.1 Electromagnetic Compatibility 22 8
12、.2 Safety 22 Safety marking and labelling of the equipment 22 Radio Type Approval . 22 Testing of equipment (guidance note) 23 8 8.2.1 8.2.2 Safety of equipment 22 8.2.1.1 Recommended Standards 22 8.3 8.4 Annex A Standards as applied to weather and non-weather protected locations 24 Non-weather prot
13、ected locations . 25 A . 1 A.2 Weather protected locations 24 History . 26 ETSI GSM*11.22 74 m 3900855 0003831 471 m Page 5 GSM 11.22 v.4.0.0: June 1994 Foreword This ETSI Technical Report (ETR) has been produoed by GSM System Mobile Group 8 (Base Site Equipment Tests). ETSI Technical Reports (ETRs)
14、 are infornative documents that contain material that is not suitable for adoption as a formal standard. This ETR is a guide for system operators and equipment manufacturers and should be applied to the physical design, functionality and testing of equipment and the equipment environment. Some of th
15、e various specifications are required by legislation in many member countries and should be regarded as mandatory in their application. ETSI GSM*LL.22 94 3400855 0003832 328 Page 7 GSM 11.22 v.4.0.0: June 1994 This ETR applies to any Base Station System type or part of a Base Station System and co-l
16、ocated equipment and equipment sites, unless otherwise stated. It applies regardless of ownership or responsibility for installation and maintenance of the equipment or network. The document does assume some previous knowledge of the subject matter and in some areas specialist understanding may be r
17、equired. This ETR addresses the following information: Product requirement overview Equipment sites and installations General applicable specifications Acoustic noise Construction Earthing and bonding Environmental Conditions Lightning protection Power supplies Reliability/Dependabilty Specific appl
18、icable specifications for product release EMC Safety Type approval 2 Normative references The following publications are referenced in this document. The sub references are given to assist in finding the relevant documentation. It is recommended that the relevant standards index is consulted for the
19、ir full titles. (1 I 73/23/EEC: “The Low Voltage Directive“ 21 89/336/EEC: “Council Directive Relating to Electromagnetic Compatibility“ 31 92/31 /EEC: “Council Directive Amending 89/336/EEC“ Pl EN 6021 5 (1 989): “Safety requirements for radio transmitter equipment“ References: IEC Publication 65 I
20、EC Publication 68-2 IEC Publication 11 2 IEC Publication 173 IEC Publication 224-1 IEC Publication 417 IEC Publication 479 IEC Publication 529 IEC Publication 536 IEC Publication 617 IEC Publication 657 IEC Publication 695 IS0 1999 IS0 3864 Publication 15 of the I.C.R.P. Publication of the W.H.O. (1
21、981) Previous page is blank ETSI GSM*LL.22 94 m 3400855 0003833 264 Page 8 GSM 11 22 v.4.0.0 June 1994 151 EN 60721-3-4 (1987): Classification of environmental conditions Part 3 Classification of groups of environmental parameters and their seventies, Stationary use at non-weather protected location
22、s References: IEC Publication 721-1 IEC Publication 721 -2 IEC Publication 721-3 EN 60950 (1 992): Safety of information technology equipment, including electrical business equipment References: IEC Publication 65 IEC Publication 73 IEC Publication 83 IEC Publication 85 IEC Publication 112 IEC Publi
23、cation 173 IEC Publication 227 IEC Publication 245 IEC Publication 309 IEC Publication 320 IEC Publication 364 IEC Publication 384-14 IEC Publication 41 7 IEC Publication 664 IEC Publication 695-2-2 IEC Publication 825 IEC Publication 885-1 IS0 21 6 IS0 261 IS0 262 IS0 3864 IS0 4046 IS0 7000 EN 4100
24、3 CFR 47, Part 68 73/23/EEC EN 41003 (1993): “Particular safety requirements for equipment to be connected to telecommunication networks“ References: IEC Publication 364 IEC Publication 479 IEC Publication 529 IEC Publication 536 IEC Publication 664 IEC Publication 664A IEC Publication Guide 105 CEP
25、T Recommendation T/CD 01 -01 CEPT Recommendation T/CD 04-03 CEPT Recommendation K. 1 1 CEPT Recommendation K.17 CEPT Recommendation K.21 CEPT Recommendation K.22 ETS 300 019-1-1 (February 1992): Equipment Engineering (EE); Environmental conditions and environmental test for telecommunications equipm
26、ent, Part 1-1 : Classification of environmentat conditions, storage“ References: ETR 035 IEC Publication 68-2-27 IEC Publication 721-2-4 IEC Publication 721-3-1 191 i121 i 31 11 41 i 51 ETSI GSM*:L1.22 94 = 3400855 O003834 LTO Page 9 GSY 11.22 v.4.0.0: June 1994 ETS 300 019-1-2 (February 1992): Equi
27、pment Engineering (EE); Environmental conditions and environmental test for telecommunications equipment, Part 1-2: Classification of environmental conditions, Transportation“ References: ETR O35 IEC Publication 68-2-27 IEC Publication 721-2-1 IEC Publication 721-3-2 ETS 300 O1 9-1-3 (February 1992)
28、: Equipment Engineering (EE); Environmental conditions and environmental test for telecommunications equipment, Part 1-3: Classification of environmental conditions, Stationary use at weather protected locations References: ETRO35 IEC Publication 68-2-27 IEC Publication 721 -3-0 IEC Publication 721
29、-3-3 ETS 300 019-1-4 (February 1992: Equipment Engineering (EE); Environmental conditions and environmental test for telecommunications equipment, Part 1-4: Classification of environmental conditions, Stationary use at non-weather protected locations References: ETR O35 IEC Publication 68-2-27 IEC P
30、ublication 721 -2-1 IEC Publication 721-2-4 IEC Publication 721 -3-3 ETS 300 019-2-1 (Draft April 1992): Equipment Engineering (EE); Environmental conditions and environmental test for telecommunications equipment, Part 2-1: Specification of environmental tests T1.l to T1.3, Storage“ References: ETS
31、 300 O1 91 -1 IEC Publication 68-2 ETS 300 O1 9-2-2 (April 1992): “Equipment Engineering (EE); Environmental conditions and environmental test for telecommunications equipment, Part 2-2: Specification of environmental tests T1.l to T1.3, Transportation References: ETS 300 019-1-1 IEC Publication 68-
32、2 IS0 41 80-2 ETS 300 O1 9-2-3 (April 1992): Equipment Enginwring (EE); Environmental conditions and environmental test for telecommunications equipment, Part 2-3: Specification of environmental tests T3.1 to T3.5, stationary use at weather protected locations“ References: ETC 300 O1 9-1 -1 IEC Publ
33、ication 68-2 ETS 300 019-2-4 (April 1992): Equipment Engineering (EE); Environmental conditions and environmental test for telecommunications equipment, Part 2-4: Specification of environmental tests T4.1 and T4.1E, Stationary use at non- weather protected locations“ References: ETS 300 O1 9-1 -1 IE
34、C Publication 68-2 ETS 300 119-2 (September 1993): Equipment Engineering (EE), European telecommunication standard for equipment practice Part 2 Engineering requirements for racks and cabinets“ References: EN 60950 Council Directive 89/366/EEC ETS 300 119 ETSI GSM*FLL-22 94 W 3400855 0003835 037 W P
35、age 10 GSM 11.22 v.4.0.0 June 1994 ETC 300 119-1 ETS 300 119-3 ETS300 119-4 i 91 I201 prETS 300 119-4 (October 1992): Equipment Engineering (EE), European telecommunication standard for equipment practice, Part 4 Engineering requirements for sub racks in miscellaneous racks and cabinets References:
36、EN 60950 Council Directive 89/366/EEC ETC 300 119 ETC300 119-3 prETS 300 132-1 (December 93): Equipment Engineering: Power supply interface at the input to telecommunications equipment. interface operated by alternating current AC“ References: EN 41 003 EN 60950 IEC Publication 38 IEC Publication 36
37、4-4-41 IEC Publication 664 IEC Publication 686 ETC 300 253 prETS 300 132-2 (December 93): Equipment Engineering: Power supply interface at the input to telecommunications equipment. interface operated direct current DC“ References: EN 41 003 EN 60950 IEC Publication 364-4-41 IEC Publication 664 DEEE
38、-4003 ETS 300 253 CCITT Recommendation 0.41 prETS 300 253 (October 1992): “Equipment Engineering (EE); Earthing and bonding of telecornmunications equipment in telecommunication centres“ References: EN 41 003 EN 60950 CENELEC HD 384 CENELEC HD 384.1 CENELEC HD 384.4.41 CENELEC HD 384.5.54 IEC Public
39、ation 50 IEC Publication 50 (604) IEC Publication 50 (826) prETS 300 342-2 (April 1994): “Radio Equipment and Systems (RES);Electro- Magnetic Compatibility (EMC) for European digital cellular telecommunications systems (GSM 900 MHz and DCS 1800 MHz); Part 2: Base Station radio and ancillary equipmen
40、t“ References: EN 50081 -1 EN 50082-1 prETS 300 339 89/336/EEC IS0 7637 Part 1 IS0 7637 Pari 2 GSM O1 .04 GSM 05.08 GSM 11.20/GSM GSM 1 1.20/DSC ETSI GSM*LLm22 9i 3400855 O003836 T73 = Page 11 GSY 1 1.22 v.4.0.0: June 1994 prETS 300 609 EN 55022 CISPR Publication No. 16-1 ENV 50140 IEC Publication 8
41、01 -2 IEC Publication 801 4 ENV 50141 IEC 1O-4-11 IEC 1ooo-4-5 ETR O35 (July 1992): Equipment Engineering (EE); Environmental Enginwring, Guidance and terminology“ IEC Publication 941 (1991): Part 1: Non-linear resistor type gapped surge arrestors for AC systems IEC Publication 529 (1989): Degrees o
42、f protection provided by enclosures (IP Code)“ IEC 721 -2-1 ,( 1982): Classification of environmental conditions“ References: IEC Publication 721 Part 1 IEC Publication 721 -2-3 3 (1 987): “Part 2: Environmental conditions appearing in nature. Air pressure IEC Publication 1024-1 (1990): Protection o
43、f structures against lightning, Pari 1 general principles“ IEC publication 1024-1-1 (1993): Part 1: Guide A - Selection of protection levels for lightning protection systems IEC 56 (Secretariat) 383: Use of failure rate data intended for reliabiliiy prediction of components in electronic equipment,
44、-Reference conditions, - Stress models for their conversion. References: IEC Publication 50 IEC Publication 68 IEC Publication 31 9 IEC Publication 362 IEC Publication 721 Part 3 721 -3-1 721 -3-2 721 -3-3 IEC Publication 863 IS0 1996/1 (1 982-09-1 5): “Acoustics - Description and measurement of env
45、ironmental noise - Part 1 Basic quantities and procedures“ IS0 3461 : “Graphic symbols“ IS0 3864: “Safety signs and colours“ IS0 7779 (First edition 1988-06-15): “Acoustics - Measurement of airborne noise emitted by computer and business equipment“ References: IS0 266 IS0 3740 IS0 3741 IS0 3742 IS0
46、3743 IS0 3744 IS0 3745 Page 12 GSM 11.22 v.4.0.0: June 1994 1341 IS0 6081 IS0 6926 IS0 9295 IS0 9296 IEC Publication 225 IEC Publication 651 IEC Publication 804 IS0 9001 : “Specification for design/development, production, installation and seMcing“ 3 Definitions 3.1 Base Station System Base Station
47、System shall, for the purposes of this document, be defined as: equipment that contains operational radio and associated support elements that conform to the GSM 900 and DCS 1800 recommendations within a cingle supporting fixed structure. EXAMPLE Stand alone radio equipment As above but combined wit
48、h digital processing equipment. As above but combined with mains power interfaces. As above but combined with external communications equipment. 3.2 Co-located equipment Co-located equipment shall, for the purposes of this document, be defined as: equipment that is a support element for operational
49、Base Station radio equipment that conforms to the GSM 900 and DCS 1800 recommendations within a single fixed structure or as a separate unit that is permanently located with the radio equipment. EXAMPLE Digital processing equipment Power Supplies Communications equipment. 3.3 Weather protected locations (ETS 300 O1 9-1-3 lo) A location at which the equipment is protected from weather influences. 3.3.1 Totally weather protected locations A location where direct weather influences are totally excluded. 3.3.2 Partially weather protected location
