ETSI PRI-ETS 300 025-1992 European Digital Cellular Telecommunications System (Phase 1) Rate Adaptation on the Mobile Station - Base Station System (MS-BSS) Interface《欧洲数字蜂窝通信系统(第1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 22 2298-1975 Plain face milling cutters with morse taper shank《带莫氏锥柄的端铣刀》.pdf

CSN 22 2310-1952 Arbor-type inserted-tooth disk cutters《卷轴机旋转工具》.pdf

CSN 22 2402-1988 Shank type milling cutters with replacement cutting tips Designation《可转位刀片模柄型铣刀 指定》.pdf

CSN 22 2408-1987 Side-and-face milling (slotting) cutters with replaceable cutting tips Dimensions and technical requirements《带可转位刀片的边面开槽铣刀 尺寸及技术要求》.pdf

CSN 22 2501-1989 Hobbing cutters Hobbing cutters for involute gearing Basic tooth profiles《圆柱形渐开线齿轮滚刀 基本齿廓》.pdf

CSN 22 2504-1973 Gear cutting tools Straight toothed rack-shaped involute gear cutters Basic rules《渐开线齿轮用直牙架状铣刀 基本规程》.pdf

CSN 22 2505-1981 Involute gear shaper cutters with 0 3 - 0 9 mm module《0 3 0 9 mm 模块渐开线齿轮刨齿刀，基本规程》.pdf

CSN 22 2506-1982 Disc involute gear cutters with 1 - 12 mm module Technical requirements《1mm–12mm 渐开线齿轮盘形铣齿刀基本规程》.pdf

CSN 22 2507-1985 Single start gear hobs for involute cylindrical gears with 1 - 25 mm module Technical requirements《1mm – 25mm渐开线圆柱齿轮用单启动齿轮滚刀精度要求》.pdf