ETSI PRI-ETS 300 654-1996 Integrated Services Digital Network (ISDN) Videotelephony Terminals Interim D-Channel Signalling Aspects《综合业务数字网(ISDN) 可视电话终端 临时D通道信令部分》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5166-1997(2016) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven《使用微波炉对胶凝车辆样品进行实验室制备的标准实施规程》.pdf

ASTM D5167-2003 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation《热用接缝及裂纹粘合密封胶和填充物溶化特性评价的标准实施规范》.pdf

ASTM D5167-2010 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation《用于评估热用接缝 断开密封胶和填充物溶化的标准操作规程》.pdf

ASTM D5167-2013 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation《用于评估热用接缝 断开密封胶和填充物溶化的标准操作规程》.pdf

ASTM D5167-2013(2018) Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation.pdf

ASTM D5168-2003 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers《三层波纹纤维板集装箱的制造和封闭的标准操作规程》.pdf

ASTM D5168-2009 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers《三层波纹纤维板集装箱的制造和封闭的标准实施规程》.pdf

ASTM D5168-2012 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers 《三层波纹纤维板集装箱的制造和封闭的标准实施规程》.pdf

ASTM D5168-2012(2017) Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers《三层波纹纤维板集装箱制造和封闭的标准实施规程》.pdf