ETSI TR 101 664-1999 Intelligent Network (IN) IN Interconnect Security Features (V1 1 1)《智能网(IN) IN互连的安全特性(版本1 1 1)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 22 6337-1973 Pressing tools Headless seeker pins Diameters 3 to 12 16 mm《无头导引头钉销 3 到12 16 mm直径》.pdf

CSN 22 6338-1973 Pressing tools Headless seeker pins Semi-products Diameters 4 06 to 12 16 mm《无头导引头钉销 半成品 4 06 到12 16 mm直径》.pdf

CSN 22 6343-1973 Pressing tools Threaded seeker pins Diameters 9 to 20 16 mm《有线导引头针9 到20 16 mm直径》.pdf

CSN 22 6344-1973 Pressing tools Threaded seeker pins Semi-products Diameters 12 5 to 20 5 mm《有线导引头针 半成品 12 5 到20 5 mm直径》.pdf

CSN 22 6345-1973 Pressing tools Headless circular section punches Diameters 0 8 to 16 2 mm《无头圆形断面冲压机0 8 到16 2 mm直径》.pdf

CSN 22 6346-1973 Pressing tools Headless circular section punches Semi-products diameters 1 6 to 16 2 mm《无头圆形断面冲压机半成品 1 6 到16 2 mm直径》.pdf

CSN 22 6352-1973 Pressing tools Headless and headed square shape trimming punches《无头及有头方形切边冲压机》.pdf

CSN 22 6353-1973 Pressing tools Headless and headed square shape trimming punches with circular cutting guide《带圆形切割导卫的无头及有头方形切边冲床》.pdf

CSN 22 6354-1973 Pressing tools Headless and headed rectangular shape trimming punches《无头及有头矩形切边冲压机》.pdf