ETSI TR 101 686-1999 Hybrid Fiber Coax (HFC) Access Networks Interworking with B-ISDN Networks (V1 1 1)《混合光纤同轴(HFC)接入网 与B-ISDN网的互通(版本1 1 1)》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 14577-1-2015 en Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 Test method《金属材料 压痕硬度和材料参数的压痕试验 第1部分 试验方法（ISO 14577-1 2015）.pdf

EN ISO 14577-2-2015 en Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 Verification and calibration of testing machines《金属材料 压痕硬度和.pdf

EN ISO 14577-3-2015 en Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 Calibration of reference blocks《金属材料 压痕硬度和材料参数的压痕试验 第3部分 基准.pdf

EN ISO 14577-4-2016 en Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 Test method for metallic and non-metallic coatings《金属材料压痕硬度.pdf

EN ISO 14579-2011 en Hexalobular socket head cap screws《内六角头螺钉》.pdf

EN ISO 14580-2011 en Hexalobular socket cheese head screws《凸头内六角螺钉》.pdf

EN ISO 14581-2013 en Fasteners - Hexalobular socket countersunk flat head screws《紧固件 内六角埋头孔平头螺钉》.pdf

EN ISO 14582-2013 en Fasteners - Hexalobular socket countersunk head screws high head《紧固件 高头内六角花形沉头螺钉》.pdf

EN ISO 14583-2011 en Hexalobular socket pan head screws《平头内六角螺钉》.pdf