ETSI TR 101 904-2001 Transmission and Multiplexing (TM) Time Division Duplex (TDD) in Point-To-Multipoint (P-MP) Fixed Wireless Access (FWA) Systems Characteristics and Network App_1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 66405-2017 Measures against counterfeiting - Guidelines for the preparation of protection concepts against counterfeiting illegal reproduction and trade of illegal goods《防伪造措施 .pdf

DIN 6644-2-1987 Packaging steel drums clamping rings with lever《包装材料 钢制鼓形包装容器 带柄锁紧环》.pdf

DIN 6644-4-1987 Packaging steel drums with full removable head stackable with wave beads《包装材料 带波形卷边、可堆垛、带可拆盖的钢制鼓形包装容器》.pdf

DIN 6646-2013 Means of packaging - Non-removable head (tight head) and removable head (open head) drums made of steel - Drop handle《包装方法 钢制非移动盖和移动盖式鼓形桶 跌落处理》.pdf

DIN 6647-1-2006 Means of packaging - Cylindrical beverage containers - Part 1 Allowable operating pressure up to 3 bar nominal volume up to 50 litres《包装形式 筒装饮料容器 第1部分 允许工作压力小于3巴、标称.pdf

DIN 6647-2-2006 Means of packaging - Cylindrical beverage containers - Part 2 Allowable operating pressure up to 7 bar nominal volume up to 50 litres《包装形式 筒装饮料容器 第2部分 允许工作压力小于7巴、标称.pdf

DIN 6647-3-2003 Means of package - Cylindrical beverage containers - Part 3 Allowable operating pressure up to 3 bar nominal volume greater 100 litres《包装材料 圆柱形饮料桶 第3部分 允许工作压力不超过3巴、.pdf

DIN 6647-4-2011 Means of packaging - Cylindrical beverage containers - Part 4 Disposal pack with allowable operating pressure up to 4 bar nominal volume up to 60 litres《包装方法 圆柱形饮料容.pdf

DIN 6650-1-2006 Dispense systems for draught beverages - Part 1 General requirements《鲜饮料配送系统 第1部分 一般要求》.pdf