1、 ETSI TR 102 137 V1.2.1 (2008-10)Technical Report Electromagnetic compatibility and Radio spectrum Matters (ERM); Use of radio frequency spectrum by equipment meeting ETSI standardsfloppy3ETSI ETSI TR 102 137 V1.2.1 (2008-10) 2Reference RTR/ERM-RM-032 Keywords Aeronautical, amateur, broadcasting, DE
2、CT, DRRS, DSB, DVB, EHF, emission, LF, maritime, MF, mobile, navigation, PMR, radio, satellite, SHF, terrestrial, transmission, UHF, VHF, VLF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Assoc
3、iation but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or p
4、erceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document shou
5、ld be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following ser
6、vices: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2008. All rights reserv
7、ed. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TR 102 137 V1.2.1 (2008-10) 3Con
8、tents Intellectual Property Rights 4g3Foreword . 4g3Introduction 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 6g33 Abbreviations . 8g34 Table of ETSI deliverables with applications and frequency bands 8g34.1 Explanatory notes to the table 9g34.1.1 ETSI deliv
9、erable column 9g34.1.2 Application column. 9g34.1.3 Frequency band of scope columns 9g34.1.4 Frequency band of ECA table columns 10g34.1.5 R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are avai
10、lable on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web se
11、rver) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). This deliverable is related to CEPT/ERC Report 25 i.1 and the ERO Frequency
12、Information System i.2. The CEPT/ERC Report 25 i.1 contains a European Table of frequency allocations and utilisations for the frequency band 9 kHz to 1000 GHz, which is commonly known as the European Common Allocation (ECA) table. It is reviewed periodically and revised as necessary by the ECC taki
13、ng into account the results of World Radio Conferences and other relevant developments. The ERO Frequency Information System (EFIS, see http:/www.efis.dk) is a database whose purpose is: to give CEPT a tool to illustrate the extent of harmonisation within Europe; to allow administrations to make rap
14、id searches and comparisons in spectrum utilisation information relating to other CEPT countries; and to meet the European Commission and industry requirements that have been made known to CEPT on many occasions. The ECA table is also accessible via EFIS. ETSI standards are listed in both EFIS and C
15、EPT/ERC Report 25 i.1. The information provided in the present document is intended to be sent to the ERO and CEPT to help them in updating the ECA table. The present document follows a different format than TR 102 137 (V1.1.1) i.3. The largest difference is that TR 102 137 (V1.1.1) i.3 focused on t
16、he European commonly allocated frequencies and the standards matching those frequencies and applications, while the present document focuses on the ETSI deliverables and the applications and frequencies covered by them. Note that the information within the ETSI deliverables themselves remains leadin
17、g over the information contained in the present document. A summary of the significant differences between TR 102 137 (V1.1.1) i.3 and the present document is given in table 1. ETSI ETSI TR 102 137 V1.2.1 (2008-10) 5Table 1: Differences between versions 1.1.1 and 1.2.1 of TR 102 137 aspect TR 102 13
18、7 V1.1.1 i.3 Present document ETSI deliverable Primarily Harmonized Standards are included. The Harmonized Standards are included as well as other documents, such as System Reference documents. Frequency bands The presentation of the frequency bands is the same as in an earlier version of CEPT/ERC R
19、eport 25 i.1. The frequency bands are given as in the scope of the ETSI deliverable or tables there within. For ETSI deliverables with broad frequency ranges (i.e. the so-called “generic standards“), the specific frequency ranges given in the ECA table are also indicated. European Common Allocation
20、The European Common Allocation is presented as in an earlier version of CEPT/ERC Report 25 i.1. Some of the ECA information is included in the present document in cases where it facilitates the synchronization between TR 102 137 and the ECA table. Application The application column is named “Use (in
21、 ETSI)“ and does not necessarily use the same terminology as EFIS. The terminology from EFIS is used as far as possible. This helps to facilitate the synchronization of the information between ETSI and CEPT. ETSI deliverable The different parts of a multipart deliverable are not shown. The different
22、 parts of a multipart deliverable are shown to help distinguish between those parts of the multipart which are a Harmonized Standard. Additionally the parts of a multipart standard may address different frequency bands (e.g. EN 301 908 i.6). R - for informative references. Referenced documents which
23、 are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited,
24、in order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lo
25、wer case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references,
26、only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. Not applicable. 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user w
27、ith regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. i.1 draft CEPT/ERC Report 25 (Lisboa 02 - Dublin 03 - Kusadasi 04 - Copenhagen 04 - Nice 07, Baku 08): “The European table of frequency allocations
28、and utilisations in the frequency range 9 kHz to 1000 GHz“. i.2 ERO Frequency Information System, http:/www.efis.dk/search/general. i.3 ETSI TR 102 137 (V1.1.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Use of Radio Frequency Spectrum by Equipment meeting ETSI Standards“. ETS
29、I ETSI TR 102 137 V1.2.1 (2008-10) 7i.4 Official Journal of the European Union, C 136/1, 3 June 2008: “Commission communication in the framework of the implementation of the Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications te
30、rminal equipment and the mutual recognition of their conformity; Publication of titles and references of Harmonized Standards under the directive“. i.5 ETSI EN 301 796: “Electromagnetic compatibility and Radio spectrum Matters (ERM); harmonized EN for CT1 and CT1+ cordless telephone equipment coveri
31、ng essential requirements under Article 3.2 of the R Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks“. i.7 CEPT/ECC Decision (01)03 with Annex 1 revised Oct. 2003 and Annex 2 revised June 2005, June 2007 and Annex 3 revised Sept. 2004, June 2007:
32、 ECC Decision of 15 November 2001 on ERO Frequency Information System (EFIS). i.8 ETSI EN 301 502: “Harmonized EN for Global System for Mobile communications (GSM); Base Station and Repeater equipment covering essential requirements under article 3.2 of the R Land Mobile Service; Radio equipment wit
33、h an internal or external RF connector intended primarily for analogue speech“. i.11 ETSI draft ETSI EN 302 567: “Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R Base Stations (BS), Repeaters
34、and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R Harmonized EN for the GSM onboard aircraft system covering the essential requirements of Article 3.2 of the R 5 GHz B
35、roadband Disaster Relief applications (BBDR); Harmonized EN covering the essential requirements of article 3.2 of the R Technical characteristics for Broadband Disaster Relief applications (BB-DR) for emergency services in disaster situations; System Reference Document“. i.16 ETSI EN 302 288: “Elect
36、romagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range“. i.17 ETSI draft ETSI EN 302 264 (both parts): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Sho
37、rt Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 to 81 GHz band“. i.18 ETSI TR 101 983: “ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Radio equipment to be used in the 76 GHz to 77 GHz band; System Reference Document f
38、or Short-Range Radar to be fitted on road infrastructure“. ETSI ETSI TR 102 137 V1.2.1 (2008-10) 8i.19 ETSI TR 102 263: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Radio equipment to be used in the 77 GHz to 81 GHz band; System Refer
39、ence Document for automotive collision warning Short Range Radar“. i.20 ETSI EN 302 536 (both parts): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz“. i.21 ETSI EN 302 537 (both parts): “Electromag
40、netic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Ultra Low Power Medical Data Service Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz “. i.22 ETSI TR 102 315: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Ultra Low
41、 Power Animal Implant Devices (ULP-AID) operating in the frequency bands: 1 MHz to 3 MHz, 11,5 MHz to 12,5 MHz, 13,5 MHz to 14,5 MHz,15,5 MHz to 16,5 MHz; System reference document“. i.23 ETSI TR 102 316: “Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Ultra Low Power Animal Implant
42、able Devices (ULP-AID) operating in the frequency band 315 kHz to 600 kHz; System Reference Document“. i.24 ETSI draft ETSI EN 302 977: “Satellite Earth Stations and Systems (SES); Harmonised EN for Vehicle-Mounted Earth Stations (VMES) operating in the 12/14 GHz frequency bands covering essential r
43、equirements under article 3.2 of the R Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonized EN covering essential requirements of article 3.2 of the R Wireless digital video links op
44、erating above 1,3 GHz; Specification of typical receiver performance parameters for spectrum planning“. 3 Abbreviations For the purposes of the present document, the abbreviations given in reference i.1 and the following apply: BBDR Broad Band Disaster Relief DECT Digital Enhanced Cordless Telecommu
45、nication ECA European Common Allocation EFIS ERO Frequency Information System EMC ElectroMagnetic Compatibility GSM Global System for Mobile IMT International Mobile Telecommunications MCA Mobile Communication service on Aircraft PMR Professional Mobile Radio, Private Mobile Radio SRR Short Range Ra
46、dar 4 Table of ETSI deliverables with applications and frequency bands The Excel file (tr_102137v010201p0.xls contained in archive tr_102137v010201p0.zip), which accompanies the present document, contains two worksheets: a table of ETSI deliverables with applications and frequency bands. This is fur
47、ther described in clause 4.1. in the worksheet “Search“, a search facility for finding standards overlapping an input frequency range. See the further description under clause 4.2. ETSI ETSI TR 102 137 V1.2.1 (2008-10) 94.1 Explanatory notes to the table 4.1.1 ETSI deliverable column The ETSI delive
48、rable column only includes deliverables with a relation to radio frequencies. All of the non-EMC standards from reference i.4 (except EN 301 796 i.5) as well as some other ETSI deliverables are included. Draft deliverables are indicated with “pr“ (preliminary) before the number of the deliverable or
49、 with the ETSI work item number. The different parts of a multipart deliverable are shown to help distinguish between those parts of the multipart which are or are not a Harmonized Standard. Additionally the parts of a multipart standard may address different frequency bands (e.g. EN 301 908 i.6). 4.1.2 Application column The application covered by the ETSI deliverable is given in the column “Application“. The terminology from EFIS for applications given in reference i.7 is used as far as possible.
