ETSI TR 102 140-2003 Services and Protocols for Advanced Networks (SPAN) Status report of transport mechanisms and protocols for the next generation of IP networkS (V1 1 1)《高级网络的业务_1.pdf

上传人:confusegate185 文档编号:735697 上传时间:2019-01-12 格式:PDF 页数:7 大小:363.22KB
下载 相关 举报
ETSI TR 102 140-2003 Services and Protocols for Advanced Networks (SPAN) Status report of transport mechanisms and protocols for the next generation of IP networkS (V1 1 1)《高级网络的业务_1.pdf_第1页
第1页 / 共7页
ETSI TR 102 140-2003 Services and Protocols for Advanced Networks (SPAN) Status report of transport mechanisms and protocols for the next generation of IP networkS (V1 1 1)《高级网络的业务_1.pdf_第2页
第2页 / 共7页
ETSI TR 102 140-2003 Services and Protocols for Advanced Networks (SPAN) Status report of transport mechanisms and protocols for the next generation of IP networkS (V1 1 1)《高级网络的业务_1.pdf_第3页
第3页 / 共7页
ETSI TR 102 140-2003 Services and Protocols for Advanced Networks (SPAN) Status report of transport mechanisms and protocols for the next generation of IP networkS (V1 1 1)《高级网络的业务_1.pdf_第4页
第4页 / 共7页
ETSI TR 102 140-2003 Services and Protocols for Advanced Networks (SPAN) Status report of transport mechanisms and protocols for the next generation of IP networkS (V1 1 1)《高级网络的业务_1.pdf_第5页
第5页 / 共7页
点击查看更多>>
资源描述

1、ETSI TR 102 140 1.1.1 (2003-05) Technical Repor Services and Protocols for Advanced Networks (SPAN); Status report of transport mechanisms and protocols for the next generation of IP networks 2 ETSI TR 102 140 VI .I .I (2003-05) Reference DTRISPAN-I30314 Keywords IP, M2UA, MJUA, SCTP, SIGTRAN, SS7,

2、SUA ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document

3、 can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute,

4、 the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI

5、documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reprod

6、uction in all media. O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Mem

7、bers. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI TR 102 140 VI . 1 . 1 (2003-05) Contents Intellectual Property Rights 4 Foreword . 4 1 Scope 5 2 References 5 3 Abbreviations . 5 4 Report . 5 4.1 Final list of TSs . 5

8、 4.2 SCTP . . 6 4.3 M2UA, M3UA a . 4.4 Further work . . History 7 ETSI 4 ETSI TR 102 140 VI .I .I (2003-05) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publ

9、icly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI W

10、eb server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). ETSI 5 ETSI TR 102 140 VI .I .I

11、 (2003-05) 1 Scope The present document describes the status of the documents worked on by Special Task Force (STF) 226. 2 Re fe re nces For the purposes of this Technical Report (TR) the following references apply: il ETSI TS 102 141: “Services and Protocols for Advanced Networks (SPAN); MTP/SCCP/S

12、SCOP and SIGTRAN (Transport of SS7 over IP); Message transfer part 2 User Adaptation layer (M2UA) Endorsement of RFC 333 1 (2002), modified“. ETSI TS 102 142: “Services and Protocols for Advanced Networks (SPAN); MTP/SCCP/SSCOP and SIGTRAN (Message of SS7 over IP); Message transfer part 3 User Adapt

13、ation layer (M3UA) Endorsement of RFC 3332 (2002), modified“. ETSI TS 102 143: “Services and Protocols for Advanced Networks (SPAN); MTP/SCCP/SSCOP and SIGTRAN (Transport of SS7 over IP); Signalling connection control part User Adaptation layer (SUA) Endorsement of SIGTRAN-SUA-14 (December 2002), mo

14、dified“. ETSI TS 102 144: “Services and Protocols for Advanced Networks (SPAN); MTP/SCCP/SSCOP and SIGTRAN (Transport of SS7 over IP); Stream Control Transmission Protocol (SCTP) Endorsement of RFC 2960 and RFC 3309, modified“. 21 31 41 3 Abbreviations For the purposes of the present document, the f

15、ollowing abbreviations apply: M2PA M2UA M3UA SUA SCTP Stream Control Transmission Protocol SIGTRAN SIGnalling TRANsport IP Internet Protocol Message transfer part 2-User Peer-to-peer Adaptation layer Message transfer part 2 User Adaptation layer Message transfer part 3 User Adaptation layer Signalli

16、ng connection control part User Adaptation layer 4 4.1 Report Final list of TSs Initially STF 226 worked on four adaptation layers developed in the SIGTRAN working group of the Internet Engineering Task Force (IETF): M2PA, M2UA, M3UA and SUA. The analysis of M2PA showed that there are no protocol el

17、ements which need to be adopted by ETSI networks. Furthermore the discussion on the SIGTRAN mailing list and at the SIGTRAN PlugTest held in November 2002 at ETSI premises showed that the protocol itself has substantial deficiencies. Furthermore during the analysis of the other adaptation layer prot

18、ocols it became clear that a document for SCTP needed. It was decided with the TB that STF 226 stops the work on M2PA and works on SCTP instead. Therefore the list of produced TSs is TS 102 141 i for M2UA, TS 102 142 2 for M3UA, TS 102 143 3 for SUA and TS 102 144 4 for SCTP. ETSI 6 ETSI TR 102 140

19、VI .I .I (2003-05) 4.2 SCTP TS 102 144 4 focusses on the requirements for an SCTP implementation used for signalling transport. All SCTP implementations are required to use the same checksum algorithm to ensure interoperability. For providing network fault tolerance the support of multihoming is req

20、uired and the heartbeat mechanism shall be used. Also multiple streams shall be supported because it is required by some SIGTRAN layers. The support of features not used by SIGTRAN layers is not required. It is also required that parameters are configurable in given ranges. The choice of these value

21、s is crucial for the successful use of SCTP for signalling transport. These values are within the given ranges but the concrete values are not given. 4.3 M2UA, M3UA and SUA All three adaptation layers are handled the same way. In the common clause 4 of TS 102 141 i, TS 102 142 2, TS 102 143 3 and TS

22、 102 144 4, considerations are given which make sure the different implementations are interoperable. Therefore it is required that SCTP is the transport protocol. Furthermore no national options are required. Dynamic registration procedures shall not be used due to foreseen interoperability problem

23、s. Application servers shall not use the broadcast mode. Furthermore it is very important that the granularity of traffic handled by application servers is not smaller than allowed by the network management messages appropriate to that layer. This restricts the usage of the protocols but it is neces

24、sary to do so for being able to interact with the SS7 network in an appropriate way. 4.4 Further work During the work of STF 226 some topics were found which need further work. These topics were out of the scope of STF 226. These topics are: it should be analyzed and documented which protocol should

25、 be used in particular situations; it should be analyzed and documented how the protocols should be used and are interworking with the SS7 network. For example, it should be considered what happens in single SG and dual SG scenarios; it should be analyzed and documented how protocol parameters shoul

26、d be chosen. This includes the parameters of SCTP depending on the scenario and the protocol parameters of the SIGTRAN protocols; it should be analyzed and documented how the different congestion control algorithms in the SS7 network and the IP network interact; it should be analyzed and documented how secure signalling transport can be provided. ETSI 7 ETSI TR 102 140 VI .I .I (2003-05) vl.l.l History May 2003 Publication ETSI

展开阅读全文
相关资源
猜你喜欢
  • DIN 15412-2-1983 Bottom blocks for lifting appliances cross pieces finished parts《起重机的底座 第2部分 横梁成品》.pdf DIN 15412-2-1983 Bottom blocks for lifting appliances cross pieces finished parts《起重机的底座 第2部分 横梁成品》.pdf
  • DIN 15413-1983 Bottom blocks for lifting appliances lifting hook nuts《起重机的下滑车 提升吊钩螺母》.pdf DIN 15413-1983 Bottom blocks for lifting appliances lifting hook nuts《起重机的下滑车 提升吊钩螺母》.pdf
  • DIN 15414-1983 Bottom blocks for lifting appliances securing plates《提升设备的下滑车 安全板》.pdf DIN 15414-1983 Bottom blocks for lifting appliances securing plates《提升设备的下滑车 安全板》.pdf
  • DIN 15417-1982 Cranes bottom blocks type D rope pulleys with plain bearings《起重机 下滑车 带滑动轴承的D型绳索轮》.pdf DIN 15417-1982 Cranes bottom blocks type D rope pulleys with plain bearings《起重机 下滑车 带滑动轴承的D型绳索轮》.pdf
  • DIN 15418-1-1982 Cranes bottom blocks type C rope pulleys with deep groove ball bearing without internal sleeve《起重机 下滑车 无内套带深槽滚珠轴承的C型绳轮》.pdf DIN 15418-1-1982 Cranes bottom blocks type C rope pulleys with deep groove ball bearing without internal sleeve《起重机 下滑车 无内套带深槽滚珠轴承的C型绳轮》.pdf
  • DIN 15418-2-1982 Cranes bottom blocks spacer sleeves for type C rope pulleys with deep groove ball bearing without internal sleeve《起重机的下滑车 无内轴套深滚道滚珠轴承的C型绳索滑轮的间隔套》.pdf DIN 15418-2-1982 Cranes bottom blocks spacer sleeves for type C rope pulleys with deep groove ball bearing without internal sleeve《起重机的下滑车 无内轴套深滚道滚珠轴承的C型绳索滑轮的间隔套》.pdf
  • DIN 15418-3-1982 Cranes bottom blocks sealing covers for type C rope pulleys with deep groove ball bearing without internal sleeve《起重机的下滑车 无内轴套深滚道滚珠轴承的C型绳索滑轮的油封盖》.pdf DIN 15418-3-1982 Cranes bottom blocks sealing covers for type C rope pulleys with deep groove ball bearing without internal sleeve《起重机的下滑车 无内轴套深滚道滚珠轴承的C型绳索滑轮的油封盖》.pdf
  • DIN 15421-1-1982 Cranes bottom blocks type B rope pulleys with deep groove ball bearing and internal sleeve《起重机的下滑车 带深滚道滚珠轴承和内轴套的B型绳索滑轮》.pdf DIN 15421-1-1982 Cranes bottom blocks type B rope pulleys with deep groove ball bearing and internal sleeve《起重机的下滑车 带深滚道滚珠轴承和内轴套的B型绳索滑轮》.pdf
  • DIN 15421-2-1982 Cranes bottom blocks internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve《起重机 下滑车 带深滚道滚珠轴承和内套筒的B型绳索轮的内轴套和隔.pdf DIN 15421-2-1982 Cranes bottom blocks internal sleeves and spacer sleeves for type B rope pulleys with deep groove ball bearing and internal sleeve《起重机 下滑车 带深滚道滚珠轴承和内套筒的B型绳索轮的内轴套和隔.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1