1、 ETSI TS 100 392-18-1 V1.7.2 (2018-01) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operation (DMO); Part 18: Air interface optimized applications; Sub-part 1: Location Information Protocol (LIP) TECHNICAL SPECIFICATION ETSI ETSI TS 100 392-18-1 V1.7.2 (2018-01) 2Referenc
2、e RTS/TCCE-03232e Keywords air interface, location, radio, TETRA, V+D ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 78
3、03/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the pri
4、or written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present
5、document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to o
6、ne of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The conte
7、nt of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of it
8、s Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 100 392-18-1 V1.7
9、.2 (2018-01) 3Contents Intellectual Property Rights 8g3Foreword . 8g3Modal verbs terminology 9g31 Scope 10g32 References 10g32.1 Normative references . 10g32.2 Informative references 10g33 Definitions, symbols and abbreviations . 11g33.1 Definitions 11g33.2 Symbols 11g33.3 Abbreviations . 11g34 Loca
10、tion information protocol 12g34.1 General . 12g34.2 Location information protocol system architecture 13g34.3 Location information protocol service description . 16g34.3.1 General on services . 16g34.3.2 Services available at the LIP-SAP 16g34.3.3 Service primitives at the LIP-SAP 17g34.3.4 Service
11、primitive parameters at the LIP-SAP . 18g34.3.5 State description 18g35 Location information protocol description . 18g35.1 Description of information elements 18g35.1.1 General on accuracies and uncertainties . 18g35.1.2 Acknowledgement request 18g35.1.2a Backlog information elements 18g35.1.3 Basi
12、c parameters . 18g35.1.4 Confidence level . 18g35.1.5 Direction of travel and direction of travel accuracy 19g35.1.6 Horizontal position and horizontal position accuracy . 19g35.1.7 Horizontal velocity and horizontal velocity accuracy . 19g35.1.8 Location altitude and location altitude accuracy . 19
13、g35.1.9 Location information destination 19g35.1.10 Location message reference 20g35.1.11 Location shape 20g35.1.12 Maximum information age . 20g35.1.13 Maximum reporting distance 20g35.1.14 Maximum reporting interval . 20g35.1.15 Maximum response time . 20g35.1.16 Minimum reporting interval 20g35.1
14、.17 Reason for sending 20g35.1.18 Report type 21g35.1.19 Request priority 21g35.1.20 Requested/required . 21g35.1.21 Start time . 21g35.1.22 Stop time . 21g35.1.23 Terminal or location identification . 22g35.1.24 Trigger definition 22g35.1.25 Trigger type 22g35.1.26 Velocity type . 22g35.1.27 Vertic
15、al velocity and vertical velocity accuracy . 22g35.2 Information flows . 23g35.2.1 General on information flows . 23g35.2.2 Pre-programmed MS sending reports . 23g3ETSI ETSI TS 100 392-18-1 V1.7.2 (2018-01) 45.2.3 Pre-programmed MS sending reports and receiving acknowledgement . 23g35.2.4 MS receivi
16、ng basic parameters . 24g35.2.5 MS receiving basic parameters and sending response 24g35.2.6 MS reporting basic parameters . 25g35.2.7 MS receiving immediate report request and sending response . 25g35.2.8 MS receiving immediate report request and asking acknowledgement 26g35.2.9 MS receiving trigge
17、r definitions and sending reports . 26g35.2.10 MS receiving trigger definitions and sending reports and asking acknowledgements 27g35.2.11 MS receiving trigger definitions and sending modification 27g35.2.12 MS receiving trigger definitions and rejecting triggers 28g35.2.13 MS receiving trigger defi
18、nitions and sending reports to other location information destination 28g35.2.14 MS receiving trigger definitions via location server and sending reports to another location information destination . 29g35.2.15 Trigger removal 30g35.2.16 Trigger reporting . 31g35.2.17 Location reporting enabling 31g
19、35.2.18 Location reporting disabling . 31g35.2.19 Location reporting temporary control . 32g35.2.20 Backlog information flows . 33g35.2.21 Allocation of entities . 34g35.3 Procedures 34g35.3.1 Relations to flow charts 34g35.3.2 General on control messages 34g35.3.3 Accuracy control in control messag
20、es 35g35.3.4 General on location report sending . 35g35.3.5 General on location report reception . 36g35.3.6 MS sending unsolicited reports . 36g35.3.7 MS receiving basic parameters . 36g35.3.8 MS reporting basic parameters . 36g35.3.9 MS sending immediate reports . 36g35.3.10 MS sending immediate r
21、eport request 37g35.3.11 Triggered report request sending 37g35.3.12 MS receiving triggered reports requests . 38g35.3.13 MS sending triggered reports 38g35.3.14 MS receiving triggered reports . 38g35.3.15 Triggered report reception in location server 38g35.3.16 Trigger removal 38g35.3.17 Report tri
22、gger request . 39g35.3.18 Location report enable/disable request . 39g35.3.19 Trigger configuration request . 40g35.3.20 Trigger and report type interactions 40g35.3.21 Location message reference usage 40g35.3.22 Triggers for Lost and Regained ability to determine location. 41g35.3.23 Trigger for Am
23、bience Listening call . 41g35.3.24 Temporary control of location reporting . 41g35.3.25 Track retrieval . 42g35.3.25.1 General on track retrieval 42g35.3.25.2 Backlog requesting entity actions . 42g35.3.25.3 MT or application actions . 43g35.3.25.3.1 Backlog location reporting 43g35.3.25.3.2 Backlog
24、 location report recording enabling and disabling 44g35.3.25.3.3 Backlog location report triggers 44g35.3.25.3.4 Result code usage 45g35.3.26 Trigger for call setup. 45g35.4 Management of time . 45g36 Location information protocol coding requirements 45g36.1 General on coding requirements . 45g36.2
25、Location information protocol PDU description tables 46g36.2.1 SHORT LOCATION REPORT PDU . 46g36.2.2 LONG LOCATION REPORT PDU . 47g36.2.3 LOCATION REPORT ACKNOWLEDGEMENT PDU 47g3ETSI ETSI TS 100 392-18-1 V1.7.2 (2018-01) 56.2.4 BASIC LOCATION PARAMETERS REQUEST PDU 48g36.2.5 BASIC LOCATION PARAMETER
26、S RESPONSE PDU 49g36.2.6 REPORT BASIC LOCATION PARAMETERS REQUEST PDU 50g36.2.7 REPORT BASIC LOCATION PARAMETERS RESPONSE PDU 50g36.2.8 ADD/MODIFY TRIGGER REQUEST PDU . 51g36.2.9 ADD/MODIFY TRIGGER RESPONSE PDU . 52g36.2.10 REMOVE TRIGGER REQUEST PDU . 53g36.2.11 REMOVE TRIGGER RESPONSE PDU . 53g36.
27、2.12 REPORT TRIGGERS REQUEST PDU . 53g36.2.13 REPORT TRIGGER RESPONSE PDU . 54g36.2.14 LOCATION REPORTING ENABLE/DISABLE REQUEST PDU 55g36.2.15 LOCATION REPORTING ENABLE/DISABLE RESPONSE PDU 55g36.2.16 IMMEDIATE LOCATION REPORT REQUEST PDU 56g36.2.17 LOCATION REPORTING TEMPORARY CONTROL REQUEST PDU
28、57g36.2.18 LOCATION REPORTING TEMPORARY CONTROL RESPONSE PDU 57g36.2.19 BACKLOG REQUEST PDU . 58g36.2.20 BACKLOG RESPONSE PDU . 58g36.2.21 Backlog PDUs 58g36.2.21.1 BACKLOG ADD/MODIFY TRIGGERS REQUEST PDU . 58g36.2.21.2 BACKLOG ADD/MODIFY TRIGGERS RESPONSE PDU . 59g36.2.21.3 BACKLOG CONFIGURATION RE
29、QUEST PDU 61g36.2.21.4 BACKLOG CONFIGURATION RESPONSE PDU 61g36.2.21.5 BACKLOG REMOVE TRIGGERS REQUEST PDU . 61g36.2.21.6 BACKLOG REMOVE TRIGGERS RESPONSE PDU . 61g36.2.21.7 BACKLOG REPORT TRIGGERS REQUEST PDU . 62g36.2.21.8 BACKLOG REPORT TRIGGERS RESPONSE PDU . 62g36.2.21.9 BACKLOG RETRIEVAL REQUE
30、ST PDU 62g36.2.21.10 BACKLOG RETRIEVAL RESPONSE PDU 63g36.3 Location information protocol PDU information elements 63g36.3.1 Acknowledgement request 63g36.3.2 Address or identification type . 63g36.3.3 Angle 64g36.3.4 Backlog information elements 64g36.3.4.1 Backlog continuation state 64g36.3.4.2 Ba
31、cklog denominator rule . 64g36.3.4.3 Backlog distance interval rule . 65g36.3.4.4 Backlog information available 65g36.3.4.5 Backlog retrieval action 65g36.3.4.6 Backlog retrieval rules 65g36.3.4.7 Backlog location reports present . 66g36.3.4.8 Backlog location reports requested . 66g36.3.4.9 Backlog
32、 order of processing 66g36.3.4.10 Backlog PDU Type . 66g36.3.4.11 Backlog time frame rule 67g36.3.4.12 Backlog time interval rule . 67g36.3.4a Confidence level . 67g36.3.4b Default enable/disable lifetime . 67g36.3.5 Direction of travel . 67g36.3.6 Direction of travel extended 68g36.3.7 Direction of
33、 travel accuracy 68g36.3.8 Direction of travel and direction of travel accuracy 68g36.3.9 Direction of travel uncertainty 69g36.3.10 Extended user defined data . 69g36.3.11 External subscriber number 69g36.3.12 Half of major axis . 69g36.3.13 Half of minor axis . 69g36.3.14 Horizontal position accur
34、acy 69g36.3.15 Horizontal position and horizontal position accuracy . 70g36.3.16 Horizontal position uncertainty. 70g36.3.17 Horizontal velocity . 70g36.3.18 Horizontal velocity accuracy 71g36.3.19 Horizontal velocity and horizontal velocity accuracy . 72g3ETSI ETSI TS 100 392-18-1 V1.7.2 (2018-01)
35、66.3.20 Horizontal velocity and vertical velocity 72g36.3.21 Horizontal velocity and vertical velocity with uncertainty . 72g36.3.22 Horizontal velocity and vertical velocity with direction of travel extended and uncertainty 72g36.3.23 Horizontal velocity uncertainty. 73g36.3.24 Horizontal velocity
36、with direction of travel extended . 73g36.3.25 Horizontal velocity with direction of travel extended and uncertainty . 73g36.3.26 Horizontal velocity with uncertainty 73g36.3.27 Inner radius . 74g36.3.28 IPv4 address 74g36.3.29 IPv6 address 74g36.3.30 Latitude . 74g36.3.31 Location altitude . 74g36.
37、3.32 Location altitude accuracy 75g36.3.33 Location altitude and location altitude accuracy . 75g36.3.34 Location altitude uncertainty 75g36.3.35 Location arc 75g36.3.36 Location circle 76g36.3.37 Location circle with altitude . 76g36.3.38 Location circle with altitude and uncertainty 76g36.3.39 Loc
38、ation data 77g36.3.40 Location ellipse . 77g36.3.41 Location ellipse with altitude 77g36.3.42 Location ellipse with altitude and uncertainty 78g36.3.43 Location information destination 78g36.3.44 Location message reference 78g36.3.45 Location point . 79g36.3.46 Location point and position error 79g3
39、6.3.47 Location point with altitude 79g36.3.48 Location reporting enable flags 80g36.3.49 Location shape 80g36.3.50 Longitude 80g36.3.51 Maximum information age . 81g36.3.52 Maximum reporting distance 81g36.3.53 Maximum reporting interval . 82g36.3.54 Maximum response time . 82g36.3.54a Minimum dete
40、ction interval 82g36.3.55 Minimum reporting interval 83g36.3.56 MNI + SSI 83g36.3.57 MNI + SSI + external subscriber number . 83g36.3.58 Name of location . 83g36.3.59 Name server type 84g36.3.60 Outer radius 84g36.3.61 PDU type 84g36.3.62 PDU type extension 85g36.3.63 Position error 85g36.3.64 Reaso
41、n for sending 86g36.3.65 Report type 87g36.3.66 Requested or required . 87g36.3.67 Request priority 87g36.3.68 Result code 88g36.3.69 SDS type-1 value 89g36.3.70 SSI 89g36.3.71 SSI + external subscriber number . 89g36.3.72 Start angle . 89g36.3.73 Start time . 90g36.3.74 Status value . 90g36.3.75 St
42、op angle . 90g36.3.76 Stop time . 90g36.3.76a Temporary control parameter definition . 91g36.3.76b Temporary control parameter type 91g36.3.76c Temporary control validity . 92g36.3.76d Temporary maximum reporting distance - relative . 92g3ETSI ETSI TS 100 392-18-1 V1.7.2 (2018-01) 76.3.76e Temporary
43、 maximum reporting distance - absolute . 92g36.3.76f Temporary minimum reporting interval - absolute . 92g36.3.76g Temporary minimum reporting interval - relative 93g36.3.76h Temporary report type 93g36.3.77 Terminal or location identification . 93g36.3.78 Time elapsed . 94g36.3.79 Time of position
44、94g36.3.80 Time data 95g36.3.81 Time type 95g36.3.82 Trigger definition (one-shot/recurring) . 95g36.3.83 Trigger removal 96g36.3.84 Trigger type (one-shot/recurring) . 97g36.3.85 Trigger type (recurring) 98g36.3.86 Type 5 element identifier 98g36.3.87 Type of additional data . 99g36.3.88 User defin
45、ed data 99g36.3.89 Velocity data . 99g36.3.90 Velocity type . 99g36.3.91 Vertical velocity 100g36.3.92 Vertical velocity accuracy 100g36.3.93 Vertical velocity and vertical velocity accuracy . 101g36.3.94 Vertical velocity uncertainty . 101g36.4 Type 5 information element description . 101g36.4.1 Ty
46、pe 5 information element definition . 101g36.4.2 Type 5 element length . 101g36.4.3 Type 5 element length extension 101g36.4.4 Type 5 information element 102g36.5 Geographical shape descriptions 102g37 Implementation requirements . 102g3Annex A (informative): Example of trigger priorities 103g3A.1 T
47、rigger priority setting . 103g3Annex B (informative): Use of location message reference 105g3B.1 Potential usage of location message reference . 105g3Annex C (informative): Change Requests 106g3History 108g3ETSI ETSI TS 100 392-18-1 V1.7.2 (2018-01) 8Intellectual Property Rights Essential patents IP
48、Rs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or p
49、otentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames wh
