1、ETSI TS 101 336 1.1.1 (2000-01) Technical Specification Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON); Protocol Implementation Conformance Statement (PICS) proforma specification for Open Settlement Protocol (OSP) 2 ETSI TS 1 O1 336 V1.l.l (2000-01) Reference DTS/TIPH
2、ON-0601 O Keywords PICS, testing ETSI Postal address F-O6921 Sophia Antipolis Cedex - FRANCE Office address 650 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Siret No 348 623 562 0001 7 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Tel.: +3
3、3 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Internet secretariata et.si.fr Individual copies of this ETSI deliverable can be downloaded from http:/www.etsi.org If you find errors in the present document, send your comment to: editor et.si.fr Important notice This ETSI deliverable may be made available in
4、 more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specifi
5、c network drive within ETSI Secretariat. Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2000. All rights reserved. ETSI 3 E
6、TSI TS 101 336 V1.l.l (2000-01) Contents Intellectual Property Rights 5 Foreword 5 Introduction 5 1 Scope 6 2 References 6 Definitions and abbreviations 6 Abbreviations . 7 3 3.1 Definitions 6 3.2 4 Conformance to this PICS proforma specification 7 PICS proforma for TS 101 321 . 8 Annex A (normative
7、): . A . 1 Guidance for completing the PICS proforma 8 A.l. 1 Purposes and structure 8 A.1.2 Abbreviations and conventions . 8 A.1.3 Instructions for completing the PICS proforma 10 A.2 A.2.1 A.2.2 Implementation Under Test (IUT) identification 11 A.2.3 A.2.4 Product supplier 11 A.2.5 A.2.6 PICS con
8、tact person . 12 A.3 A.4 AS Identification of the implementation 10 Date of the statement 11 System Under Test (SUT) identification 11 Client (if different from product supplier) 12 PICS/System Conformance Statement (SCS) 13 Global Statement of Conformance . 13 Identification of the protocol 13 A.6
9、Roles . 13 A.7 A.8 A.9 Secure Socket Layer / Transport Layer Security Capabilities . 14 Hypertext Transfer Protocol Capabilities 16 Multipurpose Internet Mail Exteiisions Capabilities . 19 A . 10 Extensible Markup Language Capabilities 20 A.11 Root Message Capabilities . 20 A . 12 Components Support
10、ed 21 A.13 PricingIndication Support 22 A . 15 AuthorisationRequest Support . 24 . A . 14 PricingConfirmation Support 23 . A . 16 AuthorisationResponse Support 26 A . 17 Authorisationlndication Support 28 A . 18 AuthorisationConfirmation Support 29 A.19 UsageIndication Support 30 A.20 UsageConfirmat
11、ion Support . 31 ETSI 4 ETSI TS 1 O1 336 V1.l.l (2000-01) A.21 ReauthorisationRequest Support 32 A.22 ReauthorisationResponse Support . 34 A.23 Authorisation Token Support . 36 A.24 XML Extensions 40 History 41 ETSI 5 ETSI TS 1 O1 336 V1.l.l (2000-01) Intellectual Property Rights IPRs essential or p
12、otentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in SR O00 3 14: “Intellectual Propero Rights (IPRs); Essential, or potentially Essential,
13、IPRs notifed to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.org/ipr). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be
14、 given as to the existence of other IPRs not referenced in SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Project Telecommunications and Internet Protocol
15、Harmonization Over Networks (TIPHON). Introduction To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called an Implementation Conformance State
16、ment (ICs). ETSI 6 ETSI TS 1 O1 336 V1.l.l (2000-01) 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Inter- domain pricing, authorization and usage exchange defined in TS 101 321 4 in compliance with the relevant requirements, and in ac
17、cordance with the relevant guidance given in ISO/IEC 9646-7 3 and ETS 300 406 i. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition nu
18、mber, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. il ETS 300 40
19、6 (1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. ISO/IEC 9646-1: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. ISO/IEC 9
20、646-7: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. TS 10 1 321 (Vi .4): “Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON); Inter-domain pricing, authorization and
21、 usage exchange“. Pl 31 41 3 3.1 Definitions and abbreviations Definitions For the purposes of the present document, the following terms and definitions apply: - - terms defined in TS 101 321 4; terms defined in ISO/IEC 9646-1 2 and in ISO/IEC 9646-7 3. In particular, the following terms defined in
22、ISO/IEC 9646-1 2 apply: Implementation Conformance Statement (ICs): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented. The ICs can take several forms: protocol ICs, profile ICs, profile specific
23、 ICs, information object ICs, etc. ICs proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICs Protocol ICs (PICS): ICs for an implementation or system claimed to conform to a given protocol specification ETSI 7 ETSI TS 1 O1 336 V1.l.l
24、2000-01) 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: HTTP ICs IUT OSP PICS SCS SSL SUT TLS Hyper Text Transfer Protocol Implementation Conformance Statement Implementation Under Test Open Settlement Protocol Protocol ICs System Conformance Statemen
25、t Secure Socket Layer System Under Test Transport Layer Security 4 Conformance to this PICS proforma specification If it claims to conform to TS 101 321 4, the actual PICS proforma to be filled in by a supplier shall be technically equivalent to the text of the PICS proforma given in annex A, and sh
26、all preserve the numberinghaming and ordering of the proforma items. A PICS which conforms to TS 101 321 4 shall be a conforming PICS proforma completed in accordance with the guidance for completion given in clause A. 1. ETSI 8 ETSI TS 1 O1 336 V1.l.l (2000-01) Annex A (normative): PICS proforma fo
27、r TS 101 321 Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended pumoses and mav further publish the completed P
28、ICS. A. 1 Guidance for completing the PICS proforma A. 1 .I Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI Technical Specification TS 101 321 4 may provide information about the implementa
29、tion in a standardized manner. The PICS proforma is subdivided into subclauses for the following categories of information: - - identification of the implementation; - identification of the protocol; guidance for completing the PICS proforma; - global statement of conformance; - roles; - major capab
30、ilities; - subsidiary capabilities; - operations; - arguments, results and errors; - timers. A. 1.2 Abbreviations and conventions The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 3. Item column The ite
31、m column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. ETSI 9 ETSI TS 1 O1 336 V1.l.l (2000-01) Stat
32、us column The following notations, defined in ISO/IEC 9646-7 3 , are used for the status column: m O nla X 0.i ci i Reference column mandatory - the capability is required to be supported; optional - the capability may be supported or not; not applicable - in the given context, it is impossible to u
33、se the capability; prohibited (excluded) - there is a requirement not to use this capability in the given context; qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a unique group of related optional items and the logic of their selectio
34、n which is defined immediately following the table; conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying a unique conditional status expression which is defined immediately following the
35、table; irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is requested from the supplier. The reference column makes reference to TS 101 321 4, except where explicitly stated otherwise. Support column The support column shall be filled in by the suppli
36、er of the implementation. The following common notations, defined in ISO/IEC 9646-7 3 , are used for the support column: Y ory supported by the implementation; Norn NIA, nla or - not supported by the implementation; no answer required (allowed only if the status is da, directly or after evaluation o
37、f a conditional status). If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter the unique reference to a
38、 conditional expression, preceded by “?“ (e.g. ?3). This expression shall be given in the space for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if and only if that profile is to be used.
39、EXAMPLE: ?3: IF prof1 THEN Y ELSE N. It is also possible to provide a comment to an answer in the space provided at the bottom of the table. NOTE: As stated in ISO/IEC 9646-7 3 , support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having
40、no ability to parse a valid parameter is non- conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Values allowed column The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are us
41、ed: - range of values: : - example: 5 20. - list of values: , , , : example: 2 ,4 ,6 ,8, 9; ETSI 10 ETSI TS 1 O1 336 V1.l.l (2000-01) example: 1 101B, 101 lB, 1 11 1B; example: OA“, 34H, 2F“. - list of named values: (), (), , (: - example: reject(l), accept(2). - length: size ( ): - example: size (i
42、 8). Values supported column The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated. References to items For each possible item answer (answer in the support column) w
43、ithin the PICS proforma a unique reference exists, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the table. If there is more than one support column in a table, the columns are discriminat
44、ed by letters (a, b, etc.), respectively. EXAMPLE 1: A34 is the reference to the answer of item 4 in table 5 of annex A. EXAMPLE 2: A.6/3b is the reference to the second answer (Le. in the second support column) of item 3 in table 6 of annex A. Prerequisite line A prerequisite line takes the form: P
45、rerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. A.1.3 Instructions for completing the PICS proforma The supplier of the implementation shall complete the PICS proforma in ea
46、ch of the spaces provided. In particular, an explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation described in subclause A. 1.2. If necessary, the supplier may provide additional comments in space at the bottom of the tables, or separately o
47、n sheets of paper. More detailed instructions are given at the beginning of the different subclauses of the PICS proforma. A.2 I dent ificat ion of the implementat ion Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test (SUT) should be fill
48、ed in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who can answer queries regarding information supplied in the PICS should be named as
49、 the contact person. ETSI 11 ETSI TS 1 O1 336 V1.l.l (2000-01) A.2.1 Date of the statement . A.2.2 Implementation Under Test (IUT) identification IUT name: . IUT version: . A.2.3 System Under Test (SUT) identification SUT name: . Hardware configuration: . Operating system: . A.2.4 Product supplier Name: Address: . . . Telephone number: Facsimile number: . E-mail address: ETSI 12 ETSI TS 1 O1 336 V1.l.l (2000-01) Additional information: . A.2.5 Client (if different from product supplier) Name: Address: . . . Telephone number: Facsimile num
