ETSI TS 101 376-5-5-2015 GEO-Mobile Radio Interface Specifications (Release 3) Third Generation Satellite Packet Radio Service Part 5 Radio interface physical layer specifications .pdf

上传人:周芸 文档编号:737905 上传时间:2019-01-12 格式:PDF 页数:41 大小:277.66KB
下载 相关 举报
ETSI TS 101 376-5-5-2015 GEO-Mobile Radio Interface Specifications (Release 3) Third Generation Satellite Packet Radio Service Part 5 Radio interface physical layer specifications .pdf_第1页
第1页 / 共41页
ETSI TS 101 376-5-5-2015 GEO-Mobile Radio Interface Specifications (Release 3) Third Generation Satellite Packet Radio Service Part 5 Radio interface physical layer specifications .pdf_第2页
第2页 / 共41页
ETSI TS 101 376-5-5-2015 GEO-Mobile Radio Interface Specifications (Release 3) Third Generation Satellite Packet Radio Service Part 5 Radio interface physical layer specifications .pdf_第3页
第3页 / 共41页
ETSI TS 101 376-5-5-2015 GEO-Mobile Radio Interface Specifications (Release 3) Third Generation Satellite Packet Radio Service Part 5 Radio interface physical layer specifications .pdf_第4页
第4页 / 共41页
ETSI TS 101 376-5-5-2015 GEO-Mobile Radio Interface Specifications (Release 3) Third Generation Satellite Packet Radio Service Part 5 Radio interface physical layer specifications .pdf_第5页
第5页 / 共41页
点击查看更多>>
资源描述

1、 ETSI TS 101 376-5-5 V3.4.1 (2015-10) GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service; Part 5: Radio interface physical layer specifications; Sub-part 5: Radio Transmission and Reception; GMR-1 3G 45.005 TECHNICAL SPECIFICATION ETSI ETSI TS 101

2、376-5-5 V3.4.1 (2015-10) 2GMR-1 3G 45.005Reference RTS/SES-00374-5-5 Keywords 3G, earth station, GMPRS, GMR, GPRS, GSM, GSO, MES, mobile, MSS, radio, satellite ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017

3、 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any elec

4、tronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PD

5、F) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/stat

6、us.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocop

7、ying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015

8、. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks regist

9、ered and owned by the GSM Association. ETSI ETSI TS 101 376-5-5 V3.4.1 (2015-10) 3GMR-1 3G 45.005Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 6g3Introduction 6g31 Scope 8g32 References 8g32.1 Normative references . 8g32.2 Informative references 9g33 Definitions, abb

10、reviations and symbols . 9g33.1 Definitions 9g33.2 Abbreviations . 10g33.3 Symbols 10g33.4 Terminal Types (informative) 10g34 Frequency bands and channel arrangement 11g34.0 General . 11g34.1 Frequency bands and duplex method . 11g34.2 RF carrier spacing and designation 12g34.3 RF carrier used for s

11、ynchronization and spot beam selection 13g34.4 Frequency assignment to spot beams . 13g35 Stability requirements. 14g35.1 Frequency and symbol timing stability 14g35.1.0 General 14g35.1.1 Definition of operating conditions 14g35.1.2 Frequency and timing stability requirement . 14g35.1.3 Frequency an

12、d timing stability requirements for packet data . 14g35.2 Frequency switching time 15g35.3 MES time alignment accuracy 15g36 Transmitter characteristics . 15g36.1 Power output characteristics and power class 15g36.1.0 General 15g36.1.1 Average EIRP - Extreme Conditions 16g36.1.2 Average EIRP - Norma

13、l Conditions . 16g36.1.3 Single Burst EIRP . 16g36.1.4 Access Burst EIRP 17g36.2 Antenna radiation pattern . 17g36.2.0 General 17g36.2.1 Boresight Oriented Radiation Patterns 17g36.2.2 Non-Boresight Oriented Radiation Patterns . 18g36.3 Transmit polarization . 18g36.4 Carrier-off conditions . 19g36.

14、4a Carrier-standby conditions . 19g36.5 Droop, ramp-up and ramp-down 19g36.6 Power control range and accuracy 20g36.6.1 Approach 20g36.6.2 Procedures and timing 20g36.6.3 Range 20g36.6.4 Accuracy . 20g36.6.5 Attenuation step size . 20g36.6.6 Initial power level Pinit20g36.7 Adjacent channel interfer

15、ence 21g36.7.0 General 21g36.7.1 Interference due to modulation . 21g36.7.2 Interference due to switching transients 23g3ETSI ETSI TS 101 376-5-5 V3.4.1 (2015-10) 4GMR-1 3G 45.0056.8 Unwanted emissions . 23g36.8.1 Unwanted emissions in the carrier-on state and carrier-standby state (L-band) . 23g36.

16、8.2 Unwanted emissions in the carrier-off state (L-band) . 23g36.8.3 Unwanted emissions in the carrier-on state and carrier-standby state (S-Band) . 23g36.8.4 Unwanted emissions in the carrier-off state (S-band) . 24g36.9 Network Packet Burst EIRP Consistency . 24g37 Receiver characteristics 24g37.1

17、 Receive antenna pattern 24g37.1.0 General 24g37.1.1 Boresight Oriented Radiation Patterns 24g37.1.2 Non-Boresight Oriented Radiation Patterns . 24g37.2 Receive polarization . 25g37.3 Receiver figure of merit . 25g37.4 Receiver sensitivity 26g37.4.0 General 26g37.4.1 Receiver BER in static condition

18、s 27g37.4.2 Receiver BER in Rician fading (A/Gb mode only) 28g37.4.3 FER of logical channels (A/Gb mode only) 28g37.4.4 FER of PUI (A/Gb mode only) . 28g37.4.5 FER of PUI and ULMAP (Iu mode only) . 29g37.4.6 FER of Common Control Channels (system using FCCH3) 29g37.5 Receiver selectivity 29g37.6 Rec

19、eiver intermodulation . 30g37.7 Receiver blocking characteristics . 30g37.7.1 L-Band 30g37.7.2 S-Band 30g37.8 Receive signal strength . 30g37.9 Erroneous frame Indication Performance . 32g37.10 Maximum Received Power Level 32g38 GPS receiver characteristics . 32g3Annex A (informative): Antenna facto

20、r equation 33g3Annex B (normative): Environmental conditions . 34g3B.1 General . 34g3B.2 Temperature . 34g3B.3 Voltage . 34g3B.4 Vibration . 34g3Annex C (normative): Channel model 35g3Annex D (informative): Derivation of receiver sensitivity specifications 36g3D.1 Introduction 36g3D.2 Definitions 36

21、g3D.2.0 General . 36g3D.2.1 Integral sensitivity 36g3D.2.2 Radiated sensitivity 37g3D.2.3 Conducted sensitivity . 37g3D.3 Parameters 38g3D.4 Calculations 38g3Annex E (informative): Bibliography . 40g3History 41g3ETSI ETSI TS 101 376-5-5 V3.4.1 (2015-10) 5GMR-1 3G 45.005Intellectual Property Rights I

22、PRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or

23、potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI.

24、 No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Sate

25、llite Earth Stations and Systems (SES). The contents of the present document are subject to continuing work within TC-SES and may change following formal TC-SES approval. Should TC-SES modify the contents of the present document it will then be republished by ETSI with an identifying change of relea

26、se date and an increase in version number as follows: Version 3.m.n where: the third digit (n) is incremented when editorial only changes have been incorporated in the specification; the second digit (m) is incremented for all other types of changes, i.e. technical enhancements, corrections, updates

27、, etc. The present document is part 5, sub-part 5 of a multi-part deliverable covering the GEO-Mobile Radio Interface Specifications (Release 3); Third Generation Satellite Packet Radio Service, as identified below: Part 1: “General specifications“: Part 2: “Service specifications“; Part 3: “Network

28、 specifications“; Part 4: “Radio interface protocol specifications“; Part 5: “Radio interface physical layer specifications“: Sub-part 1: “Physical Layer on the Radio Path: General Description; GMR-1 3G 45.001“; Sub-part 2: “Multiplexing and Multiple Access; Stage 2 Service Description; GMR-1 3G 45.

29、002“; Sub-part 3: “Channel Coding; GMR-1 3G 45.003“; Sub-part 4: “Modulation; GMR-1 3G 45.004“; Sub-part 5: “Radio Transmission and Reception; GMR-1 3G 45.005“; Sub-part 6: “Radio Subsystem Link Control; GMR-1 3G 45.008“; Sub-part 7: “Radio Subsystem Synchronization; GMR-1 3G 45.010“; Part 6: “Speec

30、h coding specifications“; Part 7: “Terminal adaptor specifications“. ETSI ETSI TS 101 376-5-5 V3.4.1 (2015-10) 6GMR-1 3G 45.005Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted

31、 as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction GMR stands for GEO (Geostationary Earth Orbit) Mobile Radio interface, which is used fo

32、r Mobile Satellite Services (MSS) utilizing geostationary satellite(s). GMR is derived from the terrestrial digital cellular standard GSM and supports access to GSM core networks. The present document is part of the GMR Release 3 specifications. Release 3 specifications are identified in the title a

33、nd can also be identified by the version number: Release 1 specifications have a GMR 1 prefix in the title and a version number starting with “1“ (V1.x.x). Release 2 specifications have a GMPRS 1 prefix in the title and a version number starting with “2“ (V2.x.x). Release 3 specifications have a GMR

34、-1 3G prefix in the title and a version number starting with “3“ (V3.x.x). The GMR release 1 specifications introduce the GEO-Mobile Radio interface specifications for circuit mode Mobile Satellite Services (MSS) utilizing geostationary satellite(s). GMR release 1 is derived from the terrestrial dig

35、ital cellular standard GSM (phase 2) and it supports access to GSM core networks. The GMR release 2 specifications add packet mode services to GMR release 1. The GMR release 2 specifications introduce the GEO-Mobile Packet Radio Service (GMPRS). GMPRS is derived from the terrestrial digital cellular

36、 standard GPRS (included in GSM Phase 2+) and it supports access to GSM/GPRS core networks. The GMR release 3 specifications evolve packet mode services of GMR release 2 to 3rdgeneration UMTS compatible services. The GMR release 3 specifications introduce the GEO-Mobile Radio Third Generation (GMR-1

37、 3G) service. Where applicable, GMR-1 3G is derived from the terrestrial digital cellular standard 3GPP and it supports access to 3GPP core networks. Due to the differences between terrestrial and satellite channels, some modifications to the GSM or 3GPP standard are necessary. Some GSM and 3GPP spe

38、cifications are directly applicable, whereas others are applicable with modifications. Similarly, some GSM and 3GPP specifications do not apply, while some GMR specifications have no corresponding GSM or 3GPP specification. Since GMR is derived from GSM and 3GPP, the organization of the GMR specific

39、ations closely follows that of GSM or 3GPP as appropriate. The GMR numbers have been designed to correspond to the GSM and 3GPP numbering system. All GMR specifications are allocated a unique GMR number. This GMR number has a different prefix for Release 2 and Release 3 specifications as follows: Re

40、lease 1: GMR n xx.zyy. Release 2: GMPRS n xx.zyy. Release 3: GMR-1 3G xx.zyy. Where: - xx.0yy (z = 0) is used for GMR specifications that have a corresponding GSM or 3GPP specification. In this case, the numbers xx and yy correspond to the GSM or 3GPP numbering scheme. - xx.2yy (z = 2) is used for G

41、MR specifications that do not correspond to a GSM or 3GPP specification. In this case, only the number xx corresponds to the GSM or 3GPP numbering scheme and the number yy is allocated by GMR. - n denotes the first (n = 1) or second (n = 2) family of GMR specifications. ETSI ETSI TS 101 376-5-5 V3.4

42、.1 (2015-10) 7GMR-1 3G 45.005A GMR system is defined by the combination of a family of GMR specifications and GSM and 3GPP specifications as follows: If a GMR specification exists it takes precedence over the corresponding GSM or 3GPP specification (if any). This precedence rule applies to any refer

43、ences in the corresponding GSM or 3GPP specifications. NOTE: Any references to GSM or 3GPP specifications within the GMR specifications are not subject to this precedence rule. For example, a GMR specification may contain specific references to the corresponding GSM or 3GPP specification. If a GMR s

44、pecification does not exist, the corresponding GSM or 3GPP specification may or may not apply. The applicability of the GSM and 3GPP specifications is defined in ETSI TS 101 376-1-2 6. ETSI ETSI TS 101 376-5-5 V3.4.1 (2015-10) 8GMR-1 3G 45.0051 Scope The present document defines the performance requ

45、irements for the Mobile Earth Station (MES) radio transceiver for the GMR-1 3G Mobile Satellite System. Requirements are defined for two categories of parameters: Those that are required to provide compatibility among the radio channels, connected either to separate or common antennas, which are use

46、d in the system. This category also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands. Those that define the transmission quality of the system. 2 References 2.1 Normative references References are either specific (identified by date of publica

47、tion and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in t

48、he expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present docume

49、nt. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in Release 7 or to the latest version of that document in the latest release less than 7. In the case of a reference to a GMR-1 3G document, a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 ETSI TS 101 376-1-1: “GEO-Mobile Radio Interface Specifications (Release 2) General Packet Radio Service; Part 1: General sp

展开阅读全文
相关资源
猜你喜欢
  • DIN EN ISO IEC 15421-2002 Information technology - Automatic identification and data capture techniques - Bar code master test specifications (ISO IEC 15421 2000) German Version EN.pdf DIN EN ISO IEC 15421-2002 Information technology - Automatic identification and data capture techniques - Bar code master test specifications (ISO IEC 15421 2000) German Version EN.pdf
  • DIN EN ISO IEC 15423-2010 Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing (ISO IEC 15423 2009) Engl.pdf DIN EN ISO IEC 15423-2010 Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing (ISO IEC 15423 2009) Engl.pdf
  • DIN EN ISO IEC 15426-2 Berichtigung 1-2011 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 2 Two-.pdf DIN EN ISO IEC 15426-2 Berichtigung 1-2011 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 2 Two-.pdf
  • DIN EN ISO IEC 15426-2-2006 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 2 Two-dimensional sym.pdf DIN EN ISO IEC 15426-2-2006 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 2 Two-dimensional sym.pdf
  • DIN EN ISO IEC 15438-2010 Information technology - Automatic identification and data capture techniques - PDF417 bar code symbology specification (ISO IEC 15438 2006) English versi.pdf DIN EN ISO IEC 15438-2010 Information technology - Automatic identification and data capture techniques - PDF417 bar code symbology specification (ISO IEC 15438 2006) English versi.pdf
  • DIN EN ISO IEC 17000-2005 Conformity assessment - Vocabulary and general principles (ISO IEC 17000 2004) Trilingual version EN ISO IEC 17000 2004《合格评定 词汇和一般原则》.pdf DIN EN ISO IEC 17000-2005 Conformity assessment - Vocabulary and general principles (ISO IEC 17000 2004) Trilingual version EN ISO IEC 17000 2004《合格评定 词汇和一般原则》.pdf
  • DIN EN ISO IEC 17020-2012 Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO IEC 17020 2012) German and English version EN.pdf DIN EN ISO IEC 17020-2012 Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO IEC 17020 2012) German and English version EN.pdf
  • DIN EN ISO IEC 17021-1-2015 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1 Requirements (ISO IEC 17021-1 2015) Ger.pdf DIN EN ISO IEC 17021-1-2015 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1 Requirements (ISO IEC 17021-1 2015) Ger.pdf
  • DIN EN ISO IEC 17024-2012 Conformity assessment - General requirements for bodies operating certification of persons (ISO IEC 17024 2012) German and English version EN ISO IEC 1702.pdf DIN EN ISO IEC 17024-2012 Conformity assessment - General requirements for bodies operating certification of persons (ISO IEC 17024 2012) German and English version EN ISO IEC 1702.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1