1、 ETSI TS 101 726 V8.6.0 (2007-10)Technical Specification Digital cellular telecommunications system (Phase 2+);Location Services (LCS);Serving Mobile Location Centre -Base Station System (SMLC-BSS) interface;Layer 3(3GPP TS 08.71 version 8.6.0 Release 1999)GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETS
2、I ETSI TS 101 726 V8.6.0 (2007-10) 1 Reference RTS/TSGG-020871v860 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse
3、 (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the ref
4、erence version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or ch
5、ange of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyrig
6、ht Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2007. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI reg
7、istered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 101 726 V8.6.0 (2007-1
8、0) 2 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Pro
9、perty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, in
10、cluding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS)
11、 has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cros
12、s reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. ETSI ETSI TS 101 726 V8.6.0 (2007-10) 3 Contents Intellectual Property Rights2 Foreword.2 Foreword.4 1 Scope 5 1.1 References 5 1.2 Abbreviations .5 2 Messages functional definitions a
13、nd contents 6 2.1 General .6 2.2 Messages 6 2.2.1 TA Request .7 2.2.2 TA Response.7 2.2.3 TOA Request 7 2.2.4 TOA Response7 2.2.5 Reject8 2.2.6 Reset .8 2.2.7 Abort.9 2.2.8 TA Layer3.9 2.2.9 MS Position Command.9 2.2.10 MS Position Response 10 3 Information element encodings 10 3.1 Message Type IE11
14、 3.2 Timing Advance IE 11 3.3 Handover Type IE 11 3.4 Cell Identity IE .12 3.5 Starting Time IE .12 3.6 Neighbor Cell Identity IE .12 3.7 Neighbor Starting Time IE .13 3.8 Channel Decription IE13 3.9 Frequency List IE .13 3.10 Handover Reference IE 13 3.11 MS Power IE 13 3.12 Measurement Report IE14
15、 3.13 Delta Timer 14 3.14 Cause IE .14 3.15 RRLP Flag IE .14 3.16 RRLP IE .15 3.17 Cell Identity List IE15 3.18 Enhanced Measurement Report IE.16 3.19 Location Area Code IE.16 Annex A (informative): Change History 17 History 18 ETSI ETSI TS 101 726 V8.6.0 (2007-10) 4 Foreword This Technical Specific
16、ation has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with
17、 an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for a
18、ll changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 101 726 V8.6.0 (2007-10) 5 1 Scope The present document contains the coding of information necessary for
19、support of location service operation on the SMLC-BSS interface layer 3. Clause 2 gives the functional definitions and contents of messages for location service operations. Clause 3 gives the general format and coding for messages used for location service and the format and coding of information el
20、ements used for location service operations. 1.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non
21、-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Re
22、lease as the present document. 1 3GPP TS 01.04: “Abbreviations and acronyms“. 2 3GPP TS 03.71: “Location Services (LCS); (Functional description) - Stage 2“. 3 3GPP TS 04.07: “Mobile radio interface signalling layer 3; General aspects“. 4 3GPP TS 04.08: “Mobile radio interface layer 3 specification“
23、. 5 3GPP TS 05.08: “Radio subsystem link control“. 6 3GPP TS 08.08: “Mobile-services Switching Centre - Base Station System (MSC-BSS) interface; Layer 3 specification“. 7 3GPP TS 09.31: “Base Station System Application Part; LCS Extension (BSSAP-LE)“. 1.2 Abbreviations Abbreviations used in the pres
24、ent document are listed in 3GPP TS 01.04. ETSI ETSI TS 101 726 V8.6.0 (2007-10) 6 2 Messages functional definitions and contents 2.1 General This subclause defines the structure of the messages of the SMLC-BSS layer 3 protocol defined in 3GPP TS 03.71. Each definition includes: a) a brief descriptio
25、n of the message; b) a table listing the information elements in the order of their appearance in the message. For each IE the table indicates: 1) the name of the IE (which gives an idea of the semantics of the element), which is used in this and other specifications as a reference to the IE within
26、the message; 2) the name of the type of the IE (which indicates the coding of the value part of the IE), and a reference to a description of the value part of the IE; 3) the presence requirement indication (M, C or O) for the IE, as defined in 3GPP TS 04.07; 4) the format of the IE (T, V, TV, LV, TL
27、V) as defined in 3GPP TS 04.07; 5) the length of the IE (or permissible range of lengths), in octets, in the message. The value of the length gives the number of octets in the IE following the length and element identifier. Where the length is encoded using more than one octet, the high order bit is
28、 bit 8 of the first (lowest numbered octet) and the low order bit is bit 1 of the last (highest numbered octet). c) subclauses specifying conditions for IEs with presence requirement C or O in the relevant message. Together with other conditions specified in 3GPP TS 03.71 this defines when the IE sh
29、all be included or not, what non-presence of such IEs means, and (for IEs with presence requirement C) the static conditions for presence and/or non-presence of the IEs (see 3GPP TS 03.71). 2.2 Messages The following Location Services related messages are exchanged between the SMLC and the BSS, with
30、 the VMSC acting as a relay. 1. TA Request 2. TA Response 3. TOA Request 4. TOA Response 5. Reject 6. Reset 7. Abort 8. TA Layer3 9. MS Position Command 10. MS Position Response ETSI ETSI TS 101 726 V8.6.0 (2007-10) 7 On the A interface the messages are contained in the Location Information IE which
31、 is encapsulated in the BSSMAP-LE Connection Oriented Information message as specified in 3GPP TS 08.08. On the Ls interface the messages are contained in the Location Information IE which is encapsulated in the BSSMAPLE Connection Oriented Information message as specified in 3GPP TS 09.31. 2.2.1 TA
32、 Request The TA Request is a message from the SMLC to the BSS, requesting BSS to return the timing advance (or access delay) of the MS. Table 2.1: TA Request message content Information element Type/Reference Presence Format Length Message Type Message Type IE 3.1 M V 1 2.2.2 TA Response The TA Resp
33、onse is a message from the BSS to the SMLC. It is a response to TA Request message and contains the following information elements. Table 2.2: TA Response message content Information element Type/Reference Presence Format Length Message Type Message Type IE 3.1 M V 1 Serving Cell Identity Cell Ident
34、ity IE 3.4 M TV 3 Timing Advance Timing Advance IE 3.2 M TV 2 Measurement Report Measurement Report IE 3.12 O TLV 18 Enhanced Measurement Report Enhanced Measurement Report IE 3.18 O TLV 20 Measured Cell Identity List Cell Identity List IE 3.17 O TLV 6 to N 2.2.3 TOA Request The TOA Request is a mes
35、sage from the SMLC to the BSS. It contains the following information elements. Table 2.3: TOA Request message content Information element Type/Reference Presence Format Length Message Type Message Type IE 3.1 M V 1 Delta Timer Delta Timer IE 3.13 M TV 2 Handover Type Handover Type IE 3.3 M TV 2 Serv
36、ing Cell Identity Cell Identity IE 3.4 M TV 3 Serving Starting Time Starting Time IE 3.5 M TV 3 Neighbor Cell Identity Neighbor Cell Identity IE 3.6 O TLV 4-n Neighbor Starting Time Neighbor Starting Time IE 3.7 O TLV 4-n 2.2.4 TOA Response The TOA Response is a message from the BSS to the SMLC. It
37、is a response to the TOA Request message. It contains the following information elements. ETSI ETSI TS 101 726 V8.6.0 (2007-10) 8 Table 2.4: TOA Response message content Information element Type/Reference Presence Format Length Message Type Message Type IE 3.1 M V 1 Channel Description Channel Descr
38、iption IE 3.8 M TV 4 Frequency List Frequency List IE 3.9 M TLV 3-n Handover Reference Handover Reference IE 3.10 M TV 2 Target Cell Identity Cell Identity IE 3.4 M TV 3 Serving Cell Identity Cell Identity IE 3.4 M TV 3 Timing Advance Timing Advance IE 3.2 M TV 2 MS Power MS Power IE 3.11 M TV 2 Mea
39、surement Report Measurement Report IE 3.12 O TLV 18 2.2.5 Reject The Reject is a message from the BSS to the SMLC. It is a possible response to TOA Request, TA Request or MS Position Command and contains the following information elements. Table 2.5: Reject message content Information element Type/R
40、eference Presence Format Length Message Type Message Type IE 3.1 M V 1 Cause Cause IE 3.14 M TV 2 The following are the expected cause values for Reject message: - congestion; - channel Mode not supported; - positioning procedure not supported; - failure for other radio related events; - incorrect s
41、erving cell identity. - BSSAP-LE Segmentation error 2.2.6 Reset The Reset is a message from the BSS to the SMLC. It is sent when the Response message contents for a positioning request are invalidated (e.g. due to handover) before the positioning procedure was completed. The message may also be sent
42、 instead of a Reject when a TOA Request cannot be performed due to an error in the serving cell identity. Table 2.6: Reset message content Information element Type/Reference Presence Format Length Message Type Message Type IE 3.1 M V 1 Cell ID Cell Identity IE 3.4 M TV 3 Timing Advance Timing Advanc
43、e IE 3.2 M TV 2 Channel description Channel Description IE 3.8 M TV 4 Cause Cause IE 3.14 M TV 2 Measurement Report Measurement Report IE 3.12 O TLV 18 Enhanced Measurement Report Enhanced Measurement Report IE 3.18 O TLV 20 Measured Cell Identity List Cell Identity List IE 3.17 O TLV 6 to N LAC Loc
44、ation Area Code IE 3.19 O TV 3 ETSI ETSI TS 101 726 V8.6.0 (2007-10) 9 The following are the expected cause values for Reset message: - intra-BSS handover; - failure for other radio related events; - supervision Timer Expired; - incorrect serving cell identity. 2.2.7 Abort The Abort is a message eit
45、her from the BSS to the SMLC or SMLC to the BSS. Upon receiving this signal, either SMLC or BSS shall abort ongoing positioning procedure. Table 2.7: Abort message content Information element Type/Reference Presence Format Length Message Type Message Type IE 3.1 M V 1 Cause Cause IE 3.14 M TV 2 The
46、following are the expected cause values for Abort message: - failure for other radio related events; - supervision Timer Expired; - inter BSS handover; - loss of signalling connection to MS. 2.2.8 TA Layer3 The TA Layer3 is an optional encapsulated message from the BSS to the SMLC that adds the foll
47、owing information in Complete layer 3 Information as described in 3GPP TS 08.08. Table 2.8: TA Layer3 message content Information element Type/Reference Presence Format Length Message Type Message Type IE 3.1 M V 1 Timing Advance Timing Advance IE 3.2 M TV 2 Measurement Report Measurement Report IE
48、3.12 O TLV 18 Enhanced Measurement Report Enhanced Measurement Report IE 3.18 O TLV 20 Measured Cell Identity List Cell Identity List IE 3.17 O TLV 6 to N 2.2.9 MS Position Command The BSSLAP MS Position Command is a message from the SMLC to BSS that contains the following information elements. Tabl
49、e 2.9: MS Position Command message content Information element Type/Reference Presence Format Length Message Type Message Type IE 3.1 M V 1 flag RRLP flag IE 3.15 M TV 2 RRLP Info RRLP IE 3.16 M TLV 3 to N ETSI ETSI TS 101 726 V8.6.0 (2007-10) 10 2.2.10 MS Position Response The BSSLAP MS Position Response is a message from the BSS to the SMLC that contains the following information elements. Table 2.10: MS Position Response message content Information element Type/Reference Presence Format Length Message Type Message Type IE 3.1 M V 1 flag RRLP flag IE 3.15
