ETSI TS 101 863-4-2001 Digital Enhanced Cordless Telecommunictions (DECT) DECT UMTS Interworking Profile (IWP) Part 4 Supplementary Services (V1 1 1)《数字增强无绳通信(DECT) DECT UMTS的互通模式(.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS L 105-1971 Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickn.pdf

BS L 112-1971 Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for weldin.pdf

BS L 114-1971 Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suit.pdf

BS L 117-1975 Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged not tested hydraulically) (not exceeding.pdf

BS L 118-1975 Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged tested hydraulically) (not exceeding 10 .pdf

BS L 119-1975 Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) .pdf

BS L 154-1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4 Si 1)《铝-铜(4)-硅(1)合金铸锭和铸件规范(溶液处理.pdf

BS L 155-1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4 Si 1)《铝-铜(4)-硅(1)合金铸锭和铸件规范(溶液处理和人工时效)》.pdf

BS L 160-1976 Specification Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) .pdf