1、 ETSI TS 102 486-2-3 V1.2.1 (2008-10)Technical Specification Intelligent Transport Systems (ITS);Road Transport and Traffic Telematics (RTTT);Test specifications for Dedicated ShortRange Communication (DSRC) transmission equipment;Part 2: DSRC application layer;Sub-Part 3: Abstract Test Suite (ATS)a
2、nd partial PIXIT proformafloppy3ETSI ETSI TS 102 486-2-3 V1.2.1 (2008-10) 2Reference RTS/ITS-0040010 Keywords ATS, ITS, DSRC, protocol, testing, TTCN, PIXIT ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 -
3、NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case o
4、f existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the presen
5、t document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of th
6、e following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2008. Al
7、l rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 486-2-3 V1
8、.2.1 (2008-10) 3Contents Intellectual Property Rights 6g3Foreword . 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 8g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 8g34 Abstract Test Method (ATM) . 9g34.1 Test architecture . 9g35
9、Untestable Test Purposes (TP) . 9g36 ATS conventions 9g36.1 Naming conventions . 10g36.1.1 Declarations part. 10g36.1.1.1 General 10g36.1.1.2 Test suite operations 10g36.1.1.3 Test suite parameter declarations 10g36.1.1.4 Test case selection expression definition 10g36.1.1.5 Test suite constant decl
10、arations . 10g36.1.1.6 Test suite variable declarations . 10g36.1.1.7 Test case variable declarations 10g36.1.1.8 Timer declarations . 11g36.1.1.9 ASP type definitions . 11g36.1.1.10 PDU type definitions . 11g36.1.1.11 Co-ordination Message (CM) type definitions 11g36.1.1.12 Alias definitions 11g36.
11、1.2 Constraints part . 11g36.1.2.1 General 11g36.1.3 Dynamic part 11g36.1.3.1 General 11g36.1.3.2 Test Case (TC) identifier . 11g36.1.3.3 Test step identifier . 12g36.1.3.4 Default identifier . 12g36.2 Implementation conventions 12g36.2.1 Declaration part 12g36.2.2 Constraint part 12g36.2.3 Dynamic
12、part 12g3Annex A (normative): Abstract Test Suite (ATS) for Application OBU 13g3A.1 The TTCN Graphical form (TTCN.GR) 13g3A.2 The TTCN Machine Processable form (TTCN.MP) 13g3Annex B (normative): Abstract Test Suite (ATS) for Application RSU . 14g3B.1 The TTCN Graphical form (TTCN.GR) 14g3B.2 The TTC
13、N Machine Processable form (TTCN.MP) 14g3Annex C (normative): Partial PIXIT proforma for Application OBU . 15g3C.1 Identification summary. 15g3ETSI ETSI TS 102 486-2-3 V1.2.1 (2008-10) 4C.2 ATS summary 15g3C.3 Test laboratory 15g3C.4 Client identification 15g3C.5 SUT 16g3C.6 Protocol layer informati
14、on 16g3C.6.1 Protocol identification 16g3C.6.2 IUT information . 16g3Annex D (normative): Partial PIXIT proforma for Application RSU 21g3D.1 Identification summary. 21g3D.2 ATS summary 21g3D.3 Test laboratory 21g3D.4 Client identification 21g3D.5 SUT 22g3D.6 Protocol layer information 22g3D.6.1 Prot
15、ocol identification 22g3D.6.2 IUT information . 22g3Annex E (normative): PCTR Proforma for Application OBU 24g3E.1 Identification summary. 24g3E.1.1 Protocol conformance test report 24g3E.1.2 IUT identification . 24g3E.1.3 Testing environment . 24g3E.1.4 Limits and reservation 25g3E.1.5 Comments. 25
16、g3E.2 IUT Conformance status 25g3E.3 Static conformance summary . 25g3E.4 Dynamic conformance summary 26g3E.5 Static conformance review report . 26g3E.6 Test campaign report 27g3E.7 Observations . 27g3Annex F (normative): PCTR Proforma for Application RSU . 28g3F.1 Identification summary. 28g3F.1.1
17、Protocol conformance test report 28g3F.1.2 IUT identification . 28g3F.1.3 Testing environment . 28g3F.1.4 Limits and reservation 29g3F.1.5 Comments. 29g3F.2 IUT Conformance status 29g3F.3 Static conformance summary . 29g3F.4 Dynamic conformance summary 30g3F.5 Static conformance review report . 30g3
18、F.6 Test campaign report 31g3F.7 Observations . 31g3Annex G (normative): Profile requirements for Application OBU . 32g3ETSI ETSI TS 102 486-2-3 V1.2.1 (2008-10) 5G.1 Generic test cases . 32g3G.2 Specific test cases . 32g3G.3 Non relevant test cases . 32g3G.4 Modified test campaign report . 33g3G.5
19、Observations . 33g3Annex H (normative): Profile requirements for Application RSU 34g3H.1 Generic test cases . 34g3H.2 Specific test cases . 34g3H.3 Non relevant test cases . 34g3H.4 Modified test campaign report . 34g3H.5 Observations . 34g3Annex I (informative): Bibliography . 35g3History 36g3ETSI
20、ETSI TS 102 486-2-3 V1.2.1 (2008-10) 6Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in E
21、TSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI
22、 IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword
23、This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport System(ITS). The present document is part 2, sub-part 3 of a multi-part deliverable covering Intelligent Transport Systems (ITS); Dedicated Short Range Communication (DSRC); Data Link Control (DLC)
24、layer as identified below: Part 1: “DSRC data link layer: medium access and logical link control“; Part 2: “DSRC application layer“: Sub-part 1: “Protocol Implementation Conformance Statement (PICS) proforma specification“; Sub-part 2: “Test Suite Structure and Test Purposes (TSS Sub-part 3: “Abstra
25、ct Test Suite (ATS) and partial PIXIT proforma“. ETSI ETSI TS 102 486-2-3 V1.2.1 (2008-10) 71 Scope The present document (TS) contains the Abstract Test Suite (ATS) and partial PIXIT proforma to test the Dedicated Short Range Communication (DSRC); Application layer. The objective of the present docu
26、ment is to provide a basis for conformance tests for DSRC equipment giving a high probability of inter-operability between different manufacturers equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 6, ISO/IEC 9646-2 7 and ISO/IEC 9646-3 8) are used as a basis for
27、the test methodology. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof
28、 and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location mig
29、ht be found at http:/docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should,
30、as far as possible, remain valid for the expected life of the document. The reference shall include the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause
31、 were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the lat
32、est edition of the referenced document (including any amendments) applies. 1 CEN EN 12834 (2003): “Road transport and traffic telematics - Dedicated Short Range Communication (DSRC) - DSRC application layer“. 2 CEN EN 12795 (2003): “Road transport and traffic telematics - Dedicated Short Range Commu
33、nication (DSRC) - DSRC data link layer: medium access and logical link control“. 3 CEN EN 12253 (2003): “Road transport and traffic telematics - Dedicated short-range communication - Physical layer using microwave at 5,8 GHz“. 4 CEN EN 13372 (2003): “Road transport and traffic telematics (RTTT) - De
34、dicated short-range communication - Profiles for RTTT“. 5 ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. ETSI ETSI TS 102 486-2-3 V1.2.1 (2008-10) 86 ISO/IEC 9646-1: “Information technology - Open
35、 Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 7 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite Specification“. 8 ISO/IEC 9646-3: “Information
36、technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)“. 9 ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protocol Profile Test
37、 Specification“. 10 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance statement“. 11 ISO 14906:2004: “Road transport and traffic telematics - Electronic fee collection - Application interface de
38、finition for dedicated short-range communication“. 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced d
39、ocument (including any amendments) applies. i.1 ETSI TS 102 178: “Broadband Radio Access Networks (BRAN); HiperMAN; Data Link Control (DLC) layer“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-7 10, EN 12253
40、 3, EN 12834 1 and EN 13372 4 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 6, ISO/IEC 9646-6 9, ISO/IEC 9646-7 10, TS 102 178 i.1, EN 12834 1 and the following apply: ASP Abstract Service Primitive ATM Abstract Test Method ATS Abstract
41、Test Suite BI Invalid BehaviourBV Valid Behaviour CM Co-ordination Message IUT Implementation Under Test SAP Service Access Point SUT System Under Test TTCN Tree and Tabular Combined Notation UT Upper Tester ETSI ETSI TS 102 486-2-3 V1.2.1 (2008-10) 94 Abstract Test Method (ATM) This clause describe
42、s the ATM used to test the DSRC Application layer at the OBU side and at the RSU side. 4.1 Test architecture Tester PHY PHY MAC SUT LLC APPL T-Kernel SAP Test Case MAC LLC Figure 1: Test architecture for DSRC Application layer A single party testing concept is used, which consists of the following a
43、bstract testing parts: Tester: A test machine that is running a TTCN engine allowing parallel testing and having a standard DSRC LLC, MAC and Physical layer. SUT: System under test: Can be RSU or OBU Implementation. Test Case: A standard TTCN test case. APPL: A standard DSRC Application to be tested
44、. LLC: A standard DSRC LLC layer. MAC: A standard DSRC MAC layer. T-Kernel-SAP: A SAP between T-Kernel and B/I-Kernel, i.e. above T-Kernel encoding/decoding function. 5 Untestable Test Purposes (TP) This clause gives a list of TPs which are not implemented in the Abstract Test Suites due to the chos
45、en Abstract Test Method or other restrictions. Table 1: Untestable TPs Test purpose Reason 6 ATS conventions The ATS conventions are intended to give a better understanding of the ATS but they also describe the conventions made for the development of the ATS. These conventions shall be considered du
46、ring any later maintenance or further development of the ATS. The ATS conventions contain two clauses, the naming conventions and the implementation conventions. The naming conventions describe the structure of the naming of all ATS elements. The implementation conventions describe the functional st
47、ructure of the ATS. ETSI ETSI TS 102 486-2-3 V1.2.1 (2008-10) 10To define the ATS, the guidelines of the document ETS 300 406 5 was considered. 6.1 Naming conventions 6.1.1 Declarations part This clause describes the naming conventions chosen for the elements of the ATS declarations part. 6.1.1.1 Ge
48、neral The following general rules apply for the names given in the declarations part. Names of ASN.1 types imported from the base standard are preserved. Predefined types (e.g. BITSTRING 8) are never used in structured type definitions, ASP type definitions or PDU type definitions. Simple types are
49、used instead. All declarations in the test suite are listed in alphabetical order. A different order of listing should be used for only maintenance reasons. 6.1.1.2 Test suite operations The test suite operation identifiers are prefixed with “TSO_“. EXAMPLE: TSO_substring. 6.1.1.3 Test suite parameter declarations If the test suite parameter references a Protocol Implementation Conformance Statement (PICS) item, the test suite parameter identifiers are prefixed “TSPC_“. EXAMPLE 1: TPC_extended_rf_carriers. If the test s
