ETSI TS 102 542-4-2016 Digital Video Broadcasting (DVB) Guidelines for the implementation of DVB-IPTV Phase 1 specifications Part 4 Remote Management and Firmware Update (V2 1 1)《数.pdf

上传人:registerpick115 文档编号:739173 上传时间:2019-01-12 格式:PDF 页数:46 大小:492.89KB
下载 相关 举报
ETSI TS 102 542-4-2016 Digital Video Broadcasting (DVB) Guidelines for the implementation of DVB-IPTV Phase 1 specifications Part 4 Remote Management and Firmware Update (V2 1 1)《数.pdf_第1页
第1页 / 共46页
ETSI TS 102 542-4-2016 Digital Video Broadcasting (DVB) Guidelines for the implementation of DVB-IPTV Phase 1 specifications Part 4 Remote Management and Firmware Update (V2 1 1)《数.pdf_第2页
第2页 / 共46页
ETSI TS 102 542-4-2016 Digital Video Broadcasting (DVB) Guidelines for the implementation of DVB-IPTV Phase 1 specifications Part 4 Remote Management and Firmware Update (V2 1 1)《数.pdf_第3页
第3页 / 共46页
ETSI TS 102 542-4-2016 Digital Video Broadcasting (DVB) Guidelines for the implementation of DVB-IPTV Phase 1 specifications Part 4 Remote Management and Firmware Update (V2 1 1)《数.pdf_第4页
第4页 / 共46页
ETSI TS 102 542-4-2016 Digital Video Broadcasting (DVB) Guidelines for the implementation of DVB-IPTV Phase 1 specifications Part 4 Remote Management and Firmware Update (V2 1 1)《数.pdf_第5页
第5页 / 共46页
点击查看更多>>
资源描述

1、 ETSI TS 102 542-4 V2.1.1 (2016-04) Digital Video Broadcasting (DVB); Guidelines for the implementation of DVB-IPTV Phase 1 specifications; Part 4: Remote Management and Firmware Update TECHNICAL SPECIFICATION ETSI ETSI TS 102 542-4 V2.1.1 (2016-04)2 Reference RTS/JTC-DVB-360-4 Keywords broadcasting

2、, digital, DVB, IP, TV, video ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present docum

3、ent can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In cas

4、e of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the docume

5、nt may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/por

6、tal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modif

7、ied without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. European Broadcasting Union 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of

8、 ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 542-4 V2.1.1 (2016-04)3 Conten

9、ts Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g3Introduction 5g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 9g33 Definitions and abbreviations . 9g33.1 Definitions 9g33.2 Abbreviations . 10g34 System Reference Model 11g35 Usage mode

10、ls . 13g35.1 Remote management only 13g35.2 Firmware Update only 14g35.3 Combined RMS/FUS implementations 15g36 Relationship between IPTV Handbook, DVB RMS-FUS specification and the Broadband Forum Remote Management framework specification 15g36.0 Introduction 15g36.1 Managed CPEs using RMS-only for

11、 startup and during normal operation 16g36.2 Managed CPEs using RMS-FUS for startup and during normal operation 17g36.3 Unmanaged CPEs using FUS-only for startup operation . 18g37 RMS-FUS metadata . 18g37.0 Explanations about the XML schema . 18g37.1 Overview 19g37.2 Definition of locally defined ty

12、pes . 20g37.2.0 General 20g37.2.1 ManufacturerOUIType . 20g37.2.2 ProductClassType . 21g37.2.3 HardwareVersionType 21g37.2.4 SoftwareVersionType . 21g37.2.5 SerialNumberType 21g37.2.6 RangeListType 22g37.2.7 PreferenceType . 23g37.2.8 InterfaceType 23g37.2.9 DeviceClassType 23g37.2.10 DeviceClassHar

13、dwareVersionType 24g37.2.11 DeviceClassSoftwareType 24g37.2.12 DeviceClassInfoType 24g37.2.13 ResourceAccessInfoType . 25g37.3 Locally defined element sub-structures and groupings 25g37.3.0 General information 25g37.3.1 DeviceGroup . 26g37.3.2 SoftwarePackageInfo 27g37.3.3 ValidityTimeRange . 28g37.

14、4 The main descriptive metadata . 28g37.4.0 Introduction. 28g37.4.1 Mode . 28g37.4.2 Entity definitions 28g37.4.2.0 General 28g37.4.2.1 CE Manufacturer . 29g37.4.2.2 FUS . 29g3ETSI ETSI TS 102 542-4 V2.1.1 (2016-04)4 7.4.2.3 RMS 30g37.4.2.4 Target devices . 30g37.4.3 Firmware Upgrade information 31g

15、38 Security Considerations for CPE management operations . 31g39 Use of “dvb-mcast“ URI . 34g39.0 Introduction 34g39.1 Example describing location of multicast announcement message using SDP/SAP/UDP . 34g39.2 Example describing location of multicast update file using DSM-CC/UDP 35g310 Possible CPE b

16、ehaviour examples for RMS and FUS . 36g310.0 Examples for firmware updates 36g310.1 At Boot Time 37g310.2 During Normal Operation 38g310.2.0 Operating modes . 38g310.2.1 RMS-only . 38g310.2.2 RMS-FUS . 39g310.2.3 FUS-only 39g311 Location of firmware update files 40g311.0 General . 40g311.1 Unmanaged

17、 environments - FUS-only . 40g311.1.0 Pre-conditions . 40g311.1.1 Use of multicast announcement service 40g311.1.1.0 Carriage of multicast announcement information . 40g311.1.1.1 Use of SDP/SAP/UDP Protocol 40g311.1.1.2 Use of XML/DVBSTP/UDP Protocol 41g311.1.2 Use of Unicast Query-Response Channel

18、. 41g311.2 Managed environments - RMS-FUS 41g311.2.0 Pre-conditions . 41g311.2.1 Use of management channel (TR-069 methods) . 41g312 Delivery of Firmware Update Files 42g312.1 Multicast Download . 42g312.1.0 Delivery Protocols for Multicast Download . 42g312.1.1 Use of FLUTE Protocol 42g312.1.2 Use

19、of DSM-CC Protocol . 42g312.2 Unicast Download 42g313 Remote Management functions for CDS . 42g3History 46g3ETSI ETSI TS 102 542-4 V2.1.1 (2016-04)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining

20、 to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat.

21、 Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the E

22、TSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by Joint Technical Committee (JTC) Broadcast of the European Broadcasting Union (EBU), Comit Europen de Normalisation ELECtrotechnique (CENELEC) and th

23、e European Telecommunications Standards Institute (ETSI). Please note that the present document is a revision to ETSI TR 102 542, and has been converted to a TS because the language used in the document is akin to that of a TS. NOTE: The EBU/ETSI JTC Broadcast was established in 1990 to co-ordinate

24、the drafting of standards in the specific field of broadcasting and related fields. Since 1995 the JTC Broadcast became a tripartite body by including in the Memorandum of Understanding also CENELEC, which is responsible for the standardization of radio and television receivers. The EBU is a profess

25、ional association of broadcasting organizations whose work includes the co-ordination of its members activities in the technical, legal, programme-making and programme-exchange domains. The EBU has active members in about 60 countries in the European broadcasting area; its headquarters is in Geneva.

26、 European Broadcasting Union CH-1218 GRAND SACONNEX (Geneva) Switzerland Tel: +41 22 717 21 11 Fax: +41 22 717 24 81 The Digital Video Broadcasting Project (DVB) is an industry-led consortium of broadcasters, manufacturers, network operators, software developers, regulatory bodies, content owners an

27、d others committed to designing global standards for the delivery of digital television and data services. DVB fosters market driven solutions that meet the needs and economic circumstances of broadcast industry stakeholders and consumers. DVB standards cover all aspects of digital television from t

28、ransmission through interfacing, conditional access and interactivity for digital video, audio and data. The consortium came together in 1993 to provide global standardization, interoperability and future proof specifications. The present document is part 4 of a multi-part deliverable. Full details

29、of the entire series can be found in part 1 i.1. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the e

30、xpression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction Remote management and firmware update service is specified in ETSI TS 102 824 2 as an optional extension to the DVB IPTV service covered by ETSI TS 102 034 1. ETSI E

31、TSI TS 102 542-4 V2.1.1 (2016-04)6 ETSI TS 102 824 2 describes the functionality required to support three primary usage models: RMS-only - management and firmware maintenance of CPEs within a managed environment, the presence of a Remote Management Server is assumed in the logical head-end network

32、architecture but no Firmware Update Server is needed. FUS-only - the provision of a generic firmware update service (FUS) which can be accessed by unmanaged CPEs, the service is assumed to be provided by a Firmware Update Server in the logical head-end system without using a Remote Management Server

33、 and may be supported directly or indirectly by the CE manufacturer. RMS-FUS combination - the provision of a generic firmware update service which can be controlled by a remote management service (RMS) for the managed population of CPEs. Because the system is considered in a completely logical way

34、the same FUS may also provide firmware updates for unmanaged CPEs. ETSI TS 102 824 2 is designed to be used in conjunction with the DVB IPTV Handbook ETSI TS 102 034 1 and these guidelines are focused on the solutions that can be realized using the combination of these specifications. However, ETSI

35、TS 102 824 2 may be used in other environments besides those described by ETSI TS 102 034 1 where suitable methods are provided to link between the environment and the RMS and FUS sub-systems. The present document describes the implementation of specific capabilities of the RMS-FUS architecture wher

36、e it was felt that ETSI TS 102 824 2 may provide insufficient clarity or information. It should not be considered that the present document can be used in isolation from ETSI TS 102 824 2. ETSI ETSI TS 102 542-4 V2.1.1 (2016-04)7 1 Scope The present document cannot be considered as a complete specif

37、ication for or description of the Remote Management and Firmware Update System specified by DVB, it is created to provide guidance to be used in conjunction with the specification (ETSI TS 102 824 2) in association with ETSI TS 102 034 1. The present document includes: Some description of the system

38、 reference model, including the interfaces is introduced in clause 4. The “operational“ relationship between the DVB IPTV, DVB RMS-FUS and the Broadband Forum remote management specifications (ETSI TS 102 034 1, and ETSI TS 102 824 2 and TR-069 7) is shown in clause 5 of the present document. The de

39、scription of the RMS and FUS usage models is given in clause 6 of the present document. Clauses 7, 8 and 9 of the present document provide some information on the components of the solution. Clauses 10, 11 and 12 of the present document contain guidelines for implementation of the RMS-FUS, arranged

40、in an order intended to reflect actual usage scenarios. Clause 13 of the present document contains usage guidelines for the data model components to support content download services based on the DVB Content Download Service described in ETSI TS 102 034 1, clause 10. Devices in the home environment

41、are all referred to as Consumer Premises Equipment (CPEs), and this may include all IP connected devices in the home which are compliant with the DVB RMS-FUS Specification ETSI TS 102 824 2. This may include home network devices connected indirectly to the access network, e.g. through a router provi

42、ded that IP connectivity can be arranged and that the requirements of ETSI TS 102 824 2 are met. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited v

43、ersion applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks incl

44、uded in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 102 034 (V2.1.1): “Digital Video Broadcasting (DVB); Transport of MPEG-2 TS Based DVB Ser

45、vices over IP Based Networks“. 2 ETSI TS 102 824: “Digital Video Broadcasting (DVB); Remote Management and Firmware Update System for DVB IPTV Services (Phase 2)“. 3 ETSI TS 102 006 (V1.3.1): “Digital Video Broadcasting (DVB); Specification for System Software Update in DVB Systems“. 4 ETSI EN 301 1

46、92: “Digital Video Broadcasting (DVB); DVB specification for data broadcasting“. 5 Broadband Forum TR-140: “TR-069 Data Model for Storage Service Enabled Devices“, Issue Number 1, Amendment 1, April 2010. NOTE: See http:/www.broadband-forum.org/technical/download/TR-140_Amendment-1.pdf. ETSI ETSI TS

47、 102 542-4 V2.1.1 (2016-04)8 6 Broadband Forum TR-135: “Data Model for a TR-069 enabled STB“, December 2007. NOTE: See http:/www.broadband-forum.org/technical/download/TR-135.pdf. 7 Broadband Forum TR-069 Amendment 4: “CPE WAN Management Protocol“, July 2011. NOTE: See http:/www.broadband-forum.org/

48、technical/download/TR-069_Amendment-4.pdf and in the context of the present document it is referred to generally as “TR-069“ or “TR-069 Framework“. 8 Broadband Forum TR-106: “Data Model Template for TR-069-Enabled Devices“, July 2011. NOTE: See http:/www.broadband-forum.org/technical/download/TR-106

49、_Amendment-6.pdf. 9 W3C Simple Object Access Protocol (SOAP) 1.1. NOTE: See http:/www.w3.org/TR/2000/NOTE-SOAP-20000508. 10 W3C XML Schema. NOTE: See http:/www.w3.org/2001/XMLSchema. 11 IEEE: “Organizationally Unique Identifiers (OUIs)“. NOTE: See http:/standards.ieee.org/faqs/OUI.html. 12 Void. 13 IETF RFC 3452: “FEC - Forward Error Correction Building Block“. 14 IETF RFC 3268: “Advanced Encryption Standard (AES) Ciphersuites for Transport Layer Security (TLS)“. 15 IETF RFC 3926:

展开阅读全文
相关资源
猜你喜欢
  • ASTM B870-2008(2014) Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys &40 UNS Nos C17500 and C17510&41 《铜-铍合金锻制和挤制合金C17500和C17510的标准规格》.pdf ASTM B870-2008(2014) Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys &40 UNS Nos C17500 and C17510&41 《铜-铍合金锻制和挤制合金C17500和C17510的标准规格》.pdf
  • ASTM B871-2001(2007) Standard Test Method for Tear Testing of Aluminum Alloy Products《铝合金产品撕裂测试的标准试验方法》.pdf ASTM B871-2001(2007) Standard Test Method for Tear Testing of Aluminum Alloy Products《铝合金产品撕裂测试的标准试验方法》.pdf
  • ASTM B872-2006 Standard Specification for Precipitation-Hardening Nickel Alloys Plate Sheet and Strip《淀积硬化镍合金金属板、薄板和带材的标准规范》.pdf ASTM B872-2006 Standard Specification for Precipitation-Hardening Nickel Alloys Plate Sheet and Strip《淀积硬化镍合金金属板、薄板和带材的标准规范》.pdf
  • ASTM B872-2006(2011) Standard Specification for Precipitation-Hardening Nickel Alloys Plate Sheet and Strip《淀积硬化镍合金金属板 薄板和带材的标准规范》.pdf ASTM B872-2006(2011) Standard Specification for Precipitation-Hardening Nickel Alloys Plate Sheet and Strip《淀积硬化镍合金金属板 薄板和带材的标准规范》.pdf
  • ASTM B872-2006(2016) Standard Specification for Precipitation-Hardening Nickel Alloys Plate Sheet and Strip《沉淀硬化镍合金板材 薄板材和带材的标准规格》.pdf ASTM B872-2006(2016) Standard Specification for Precipitation-Hardening Nickel Alloys Plate Sheet and Strip《沉淀硬化镍合金板材 薄板材和带材的标准规格》.pdf
  • ASTM B873-2001(2007) Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212 B329 and B417《B212 B329和B417的测试方法中用的表观密度杯的容积测量的标准试验方法》.pdf ASTM B873-2001(2007) Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212 B329 and B417《B212 B329和B417的测试方法中用的表观密度杯的容积测量的标准试验方法》.pdf
  • ASTM B873-2012 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212 B329 and B417《B212、B329和B417测试方法中用表观密度杯的容积测量的标准试验方法》.pdf ASTM B873-2012 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212 B329 and B417《B212、B329和B417测试方法中用表观密度杯的容积测量的标准试验方法》.pdf
  • ASTM B873-2017 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212 B329 and B417《测量试验方法B212 B329和B417使用表观密度杯容量的标准试验方法》.pdf ASTM B873-2017 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212 B329 and B417《测量试验方法B212 B329和B417使用表观密度杯容量的标准试验方法》.pdf
  • ASTM B874-1996(2003) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process《用于固体渗金属处理的铬扩散镀层的标准规范》.pdf ASTM B874-1996(2003) Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process《用于固体渗金属处理的铬扩散镀层的标准规范》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1