1、 ETSI TS 102 587-2 V1.1.1 (2007-04)Technical Specification Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Peer-to-Peer Digital Private Mobile Radio;Part 2: Test Suite Structure and Test Purposes (TSS Essential, or potentially Essential, IPRs notified to E
2、TSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be give
3、n as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility
4、 and Radio spectrum Matters (ERM). The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Peer-to-Peer Digital Private Mobile Radio, as identified below: Part 1: “Protocol Implementation Conf
5、ormance Statement (PICS) proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Requirements catalogue“; Part 4: “Abstract Test Suite (ATS)“; Part 5: “Interoperability Test Suite Structure and Test Purposes (TSS Peer-to-Peer Digital Private Mobile Radio using FDMA with a channel sp
6、acing of 6,25 kHz with e.r.p. of up to 500 mW“. 2 ETSI TS 102 351: “Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); IPv6 Testing: Methodology and Framework“. 3 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and f
7、ramework - Part 2: Abstract Test Suite specification“. 4 ETSI TS 102 587-3: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 3: Requirements catalogue“. 3 Abbreviations For the purposes of the present document, the following abbreviatio
8、ns apply: CF (Test) ConFiguration CSF Configured Services and Facilities dPMR digital Private Mobile Radio ISDM Individual Short Data Message ISF Initial Services and Facilities IUT Implementation Under Test MS Mobile Station OACSU Off Air Call Set-Up PTT Push To Talk RC Requirements Catalogue RQ Re
9、Quirement TP Test Purpose TSS Test Suite Structure ETSI ETSI TS 102 587-2 V1.1.1 (2007-04) 6 4 Test Suite Structure (TSS) The Test Suite Structure is based on the dPMR Requirements Catalogue 4. It is defined by the groups within the following TPLan specification of test purposes. The numbering is no
10、t contiguous so that new TPs can be added at a later date without the need to completely renumber the TSS groups. The test purposes have been divided into three groups: Group 1: Common requirements. Group 2: CSF requirements. Group 3: ISF requirements. The sub-grouping of these three group follows t
11、he structure of the RC. Some of the sub-groups of the RC contained no testable requirement. Headings for those sub-groups are in this test purpose document in the node group to give a full view on the relation between RQ and TSS&TP. Group 1 “ISF CSF Common“ Group 1.1 “All Call“ Group 1.2 “Channel Ac
12、cess“ Group 1.3 “Framing“ Group 1.3.1 “End frame“ Group 1.3.2 “Header frames“ Group 1.3.2.1 “Call information field“ Group 1.3.3 “Packet data frame“ Group 1.3.4 “Superframe“ Group 1.3.4.1 “Type 1 data“ Group 1.3.4.2 “Type 2 data“ Group 1.3.4.3 “Voice“ Group 1.4 “Late Entry“ Group 1.5 “Powersave“ Gro
13、up 1.6 “Talking Party ID“ Group 2 “CSF“ Group 2.1 “Broadcast Call“ Group 2.2 “Dialling Plan“ Group 2.3 “Individual Short Data Message“ Group 2.3.1 “ISDM Free Text Message“ Group 2.3.2 “ISDM Precoded Message“ Group 2.3.3 “ISDM Short File Transfer“ Group 2.3.4 “ISDM Status Message“ Group 2.4 “OACSU“ G
14、roup 2.5 “Short Appended Data“ Group 2.6 “Slow User Data“ Group 2.7 “Type 3 data“ Group 3 “ISF“ 5 Test Purposes (TP) The test purposes have been written in the formal notation TPlan. Configurations that are referenced by test purposes are shown in annex A. TPLan user definitions are listed in annex
15、B. 5.1 Group ISF CSF Common Group 1 ISF CSF Common 5.1.1 Group All Call Group 1.1 All Call TP id : TP_PMR_0824_01 summary : ISF All Call RQ ref : RQ_001_0824 TP type : conformance Role : ISF config : CF_dPMR_ISF_02_C - ISF IUT, TESTER ISF & user TD ref : TBD with IUT in standby and using a Common_ID
16、 between 1 and 254 ETSI ETSI TS 102 587-2 V1.1.1 (2007-04) 7 ensure that when IUT receives a Voice_Transmission containing Call_Data containing Common_ID set to 255 and containing audible test tone as payload then IUT outputs the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
17、xxxxxxxxxxx TP id : TP_PMR_0824_02 summary : ISF All Call RQ ref : RQ_001_0824 TP type : conformance Role : ISF config : CF_dPMR_ISF_02_C - ISF IUT, TESTER ISF & User TD ref : TBD with IUT in standby and using a Common_ID of 255 ensure that when IUT receives a Voice_Transmission containing Call_Data
18、 containing Common_ID set to 255 and containing audible test tone as payload then IUT outputs the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0824_03 summary : ISF All Call RQ ref : RQ_001_0824 TP type : conformance Role : ISF config : CF_dPMR_ISF
19、_02_C - ISF IUT, TESTER ISF & User TD ref : TBD with IUT in standby and using a Common_ID of 255 ensure that when IUT receives a Voice_Transmission containing Call_Data containing Common_ID between 1 and 254 and containing audible test tone as payload then IUT does not output the audible test tone E
20、nd group 1.1 5.1.2 Group channel access Group 1.2 Channel Access TP id : TP_PMR_1004_01 summary : Interference on channel RQ ref : RQ_001_1004 TP type : conformance Role : ISF, CSF config : CF_dPMR_ISF/CSF_02_C - ISF/CSF IUT, TESTER ISF/CSF & User TD ref : TBD with IUT in standby and configured_for_
21、polite_to_own_CC ensure that when TESTER sends a continuous Voice_Transmission using an invalid colour_code and a signal level of -102 dBm and IUT is requested to make a Voice_Transmission then IUT sends the Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : T
22、P_PMR_1005_01 summary : Tx WAIT Time RQ ref : RQ_001_1005 TP type : conformance Role : ISF, CSF config : CF_dPMR_ISF/CSF_02_C - ISF/CSF IUT, TESTER ISF/CSF & User TD ref : TBD ETSI ETSI TS 102 587-2 V1.1.1 (2007-04) 8 with IUT in standby ensure that when TESTER sends a Voice_Transmission with an End
23、_Frame containing Tx_WAIT set to a non_zero value and IUT is requested to send a PTT_Call during the Tx_WAIT time then IUT does not transmit during the Tx_WAIT time - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1007_01 summary : Acknowledgement response time RQ ref :
24、 RQ_001_1007 TP type : conformance Role : CSF config : CF_dPMR_CSF_03_C - CSF IUT, TESTER 2 CSF & User TD ref : TBD with IUT in standby and configured_for_impolite_channel_access ensure that when TESTER sends a continuous Voice_Transmission using a signal level of -102 dBm and sends a Voice_Transmis
25、sion using a signal level of -82 dBm with an End_Frame containing ARQ set to 01b then IUT sends an Ack_Frame - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1007_02 summary : Acknowledgement response time RQ ref : RQ_001_1007 TP type : conformance Role : CSF config : C
26、F_dPMR_CSF_03_C - CSF IUT, TESTER 2 CSF & User TD ref : TBD with IUT in standby and configured_for_polite_to_own_CC ensure that when TESTER sends a continuous Voice_Transmission using a signal level of -102 dBm and sends a Voice_Transmission using a signal level of -82 dBm with an End_Frame containi
27、ng ARQ set to 01b then IUT sends an Ack_Frame within T_Ack seconds or after the TESTER terminates the continuous Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1008_01 summary : Party to call RQ ref : RQ_001_1008 TP type : conformance Role : ISF, CS
28、F config : CF_dPMR_ISF/CSF_02_C - ISF/CSF IUT, TESTER ISF/CSF & User TD ref : TBD with IUT in standby ensure that when TESTER sends a continuous Voice_Transmission using a wildcard_group_address or numeric_group_address of the IUT and IUT is requested to send a PTT_Call to the same wildcard_group_ad
29、dress or numeric_group_address then IUT sends the PTT_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1009_01 summary : Polite to CC RQ ref : RQ_001_1009 TP type : conformance Role : ISF config : CF_dPMR_ISF_02_C - ISF IUT, TESTER ISF & User TD ref : TBD with IUT
30、in standby and configured_for_polite_to_own_CC ETSI ETSI TS 102 587-2 V1.1.1 (2007-04) 9 ensure that when TESTER sends a continuous Voice_Transmission not addressed to the IUT and IUT is requested to send a Voice_Transmission then IUT does not transmit - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
31、xxxxxxxxxxxxxxxx TP id : TP_PMR_1010_01 summary : Polite to CC RQ ref : RQ_001_1010 TP type : conformance Role : ISF config : CF_dPMR_ISF_02_C - ISF IUT, TESTER ISF & User TD ref : TBD with IUT in standby and configured_for_impolite_channel_access ensure that when TESTER sends a continuous Voice_Tra
32、nsmission not addressed to the IUT and IUT is requested to send a Voice_Transmission then IUT sends that Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1011_01 summary : Polite to own group RQ ref : RQ_001_1011 TP type : conformance Role : CSF confi
33、g : CF_dPMR_CSF_02_C - CSF IUT, TESTER CSF & User TD ref : TBD with IUT in standby and configured_for_polite_to_own_group ensure that when TESTER sends a continuous Voice_Transmission to an individual_address that is also a member of a group configured in the IUT and IUT is requested to send a Voice
34、_Transmission then IUT does not transmit - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1012_01 summary : Multiple acknowledgements RQ ref : RQ_001_1012 TP type : conformance Role : CSF config : CF_dPMR_CSF_03_C - CSF IUT, TESTER CSF & User TD ref : TBD with IUT in st
35、andby and configured_for_impolite_channel_access ensure that when TESTER sends a continuous Voice_Transmission using a signal level of -102 dBm and sends a Voice_Transmission using a signal level of -82 dBm with an End_Frame containing ARQ set to 01b then IUT sends up to 4 Ack_Frames - xxxxxxxxxxxxx
36、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1012_02 summary : Acknowledgement response time RQ ref : RQ_001_1012 TP type : conformance Role : CSF config : CF_dPMR_CSF_03_C - CSF IUT, TESTER CSF & User TD ref : TBD with IUT in standby and configured_for_polite_to_own_CC ensure tha
37、t when TESTER sends a continuous Voice_Transmission using a signal level of -102 dBm and sends a Voice_Transmission using a signal level of -82 dBm with an End_Frame containing ARQ set to 01b ETSI ETSI TS 102 587-2 V1.1.1 (2007-04) 10then IUT sends up to 4 Ack_Frames within T_Ack seconds or after th
38、e TESTER terminates the continuous Voice_Transmission End group 1.2 5.1.3 Group framing Group 1.3 Framing - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0401_01 summary : Payload frame length with voice data RQ ref : RQ_001_0401 TP type : conformance Role : ISF, CSF c
39、onfig : CF_dPMR_ISF/CSF_02_C - ISF/CSF IUT, TESTER ISF/CSF & User TC ref : TBD with IUT in standby ensure that when IUT is requested to start a Voice_Transmission then IUT sends Voice_Transmission containing 384 bit Payload_Frames - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id
40、 : TP_PMR_0401_02 summary : Payload frame length with Type 1 data RQ ref : RQ_001_0401 TP type : conformance Role : ISF, CSF config : CF_dPMR_ISF/CSF_02_C - ISF/CSF IUT, TESTER ISF/CSF & User TC ref : TBD with IUT in standby ensure that when IUT is requested to start a T1_Transmission then IUT sends
41、 T1_Transmission containing 384 bit Payload_Frames - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0401_03 summary : Payload frame length with Type 2 data RQ ref : RQ_001_0401 TP type : conformance Role : ISF, CSF config : CF_dPMR_ISF/CSF_02_C - ISF/CSF IUT, TESTER ISF
42、/CSF & User TC ref : TBD with IUT in standby ensure that when IUT is requested to start a T2_Transmission then IUT sends T2_Transmission containing 384 bit Payload_Frames - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0403_01 summary : There are four payload frames in
43、 a superframe in a voice transmission RQ ref : RQ_001_0403 TP type : conformance Role : ISF, CSF config : CF_dPMR_ISF/CSF_02_C - ISF/CSF IUT, TESTER ISF/CSF & User TC ref : TBD with IUT in standby ensure that when IUT is requested to start a Voice_Transmission then IUT sends a Voice_Transmission con
44、taining Superframes (each containing 4 Payload_Frames) - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0403_02 summary : There are four payload frames in a superframe in a Type 1 data transmission ETSI ETSI TS 102 587-2 V1.1.1 (2007-04) 11RQ ref : RQ_001_0403 TP type :
45、 conformance Role : ISF, CSF config : CF_dPMR_ISF/CSF_02_C - ISF/CSF IUT, TESTER ISF/CSF & User TC ref : TBD with IUT in standby ensure that when IUT is requested to start a T1_Transmission then IUT sends a T1_Transmission containing Superframes (each containing 4 Payload_Frames) - xxxxxxxxxxxxxxxxx
46、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0403_03 summary : There are four payload frames in a superframe in a Type 2 data transmission RQ ref : RQ_001_0403 TP type : conformance Role : ISF, CSF config : CF_dPMR_ISF/CSF_02_C - ISF/CSF IUT, TESTER ISF/CSF & User TC ref : TBD with IU
47、T in standby ensure that when IUT is requested to start a T2_Transmission then IUT sends a T2_Transmission containing Superframes (each containing 4 Payload_Frames) - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0404_01 summary : A voice transmission is composed of he
48、ader frame, integral superframes, end frame RQ ref : RQ_001_0404 TP type : conformance Role : ISF, CSF config : CF_dPMR_ISF/CSF_02_C - ISF/CSF IUT, TESTER ISF/CSF & User TC ref : TBD with IUT in standby ensure that when IUT is requested to start a Voice_Transmission then IUT sends a Voice_Transmission containing a Header_Frame followed by an integral_number of Superframes followed
