1、 ETSI TS 102 587-6 V1.1.1 (2008-07)Technical Specification Electromagnetic compatibilityand Radio spectrum Matters (ERM);Interoperability testing for the Peer-to-PeerDigital Private Mobile Radio;Part 6: Test Descriptions (TD)ETSI ETSI TS 102 587-6 V1.1.1 (2008-07) 2 Reference DTS/ERM-TGDMR-269-6 Key
2、words digital, interoperability, mobile, radio, testing, TSS Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to t
3、he ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Fo
4、reword This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 6 of a multi-part deliverable covering the Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance t
5、esting for the Peer-to-Peer Digital Private Mobile Radio, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS) proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Requirements catalogue“; Part 4: “Abstract Test Suite (ATS)“; Part 5: “Interoperabilit
6、y Test Suite Structure and Test Purposes (TSS Part 6: “Test descriptions (TD)“. ETSI ETSI TS 102 587-6 V1.1.1 (2008-07) 5 1 Scope The present document contains the Test Descriptions (TD) for interoperability testing of the ERM; Peer-to-Peer Digital Private Mobile Radio using FDMA with a channel spac
7、ing of 6,25 kHz with e.r.p of up to 500 mW as defined in TS 102 490 1. The objective of this test specification is to provide a basis for interoperability tests for ERM Peer-to-Peer Digital Private Mobile Radio equipment giving a high probability of inter-operability between different manufacturers
8、ERM DMR equipment. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete document or a part thereof an
9、d only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might
10、be found at http:/docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the reference should, as
11、far as possible, remain valid for the expected life of the document. The reference shall include the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower case letters. NOTE: While any hyperlinks included in this clause we
12、re valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest
13、 edition of the referenced document (including any amendments) applies. 1 ETSI TS 102 490 (V1.3.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio using FDMA with a channel spacing of 6,25 kHz with e.r.p. of up to 500 mW“. 2 Void. 3 Void. 4
14、 ETSI TS 102 587-3: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 3: Requirements catalogue“. ETSI ETSI TS 102 587-6 V1.1.1 (2008-07) 6 2.2 Informative references The following referenced documents are not essential to the use of the
15、 present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable. 3 Abbreviations For the purposes of the present document, the following abbreviations ap
16、ply: CF (Test) ConFiguration CSF Configured Services and Facilities dPMR digital Private Mobile Radio ISDM Individual Short Data Message ISF Initial Services and Facilities OACSU Off Air Call Set-Up PTT Push To Talk RC Requirements Catalogue RQ ReQuirement TD Test Description TP Test Purpose TSS Tes
17、t Suite Structure 4 Test Suite Structure (TSS) The Test Suite Structure is based on the dPMR Requirements Catalogue 4. It is defined by the groups within the following specification of test descriptions. The numbering is not contiguous so that new TDs can be added at a later date without the need to
18、 completely renumber the TSS groups. The test descriptions have been divided into three groups: Group 1: Common requirements. Group 2: CSF requirements. Group 3: ISF requirements. The sub-grouping of these three group follows the structure of the RC. Some of the sub-groups of the RC contained no tes
19、table requirement. Headings for those sub-groups are in this test purpose document in the node group to give a full view on the relation between RQ and TD. Group 1 “ISF CSF Common“ Group 1.1 “All Call“ Group 1.2 “Channel Access“ Group 1.3 “Framing“ Group 1.3.1 “End frame“ Group 1.3.2 “Header frames“
20、 Group 1.3.2.1 “Call information field“ Group 1.3.3 “Packet data frame“ Group 1.3.4 “Superframe“ Group 1.3.4.1 “Type 1 data“ Group 1.3.4.2 “Type 2 data“ Group 1.3.4.3 “Voice“ Group 1.4 “Late Entry“ Group 1.5 “Powersave“ Group 1.6 “Talking Party ID“ Group 2 “CSF“ Group 2.1 “Broadcast Call“ Group 2.2
21、“Dialling Plan“ Group 2.3 “Individual Short Data Message“ Group 2.3.1 “ISDM Free Text Message“ Group 2.3.2 “ISDM Precoded Message“ ETSI ETSI TS 102 587-6 V1.1.1 (2008-07) 7 Group 2.3.3 “ISDM Short File Transfer“ Group 2.3.4 “ISDM Status Message“ Group 2.4 “OACSU“ Group 2.5 “Short Appended Data“ Grou
22、p 2.6 “Slow User Data“ Group 2.7 “Type 3 data“ Group 3 “ISF“ 5 Test Descriptions (TD) Configurations that are referenced by test descriptions are shown in annex A. 5.1 ISF CSF Common Group 1 ISF CSF Common 5.1.1 All Call Group 1.1 All Call Test Description Identifier: TD_PMR_0824_01 Test Purpose: TP
23、_PMR_0824_01 Summary: Support of all call with any specific callee ID Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_0824, RQ_001_0824 - ISF QE1 and EUT with QE1 and EUT in standby and using_compatible_vocoders ensure that when QE1 uses Common_ID 255 and EUT uses another Common_ID and Q
24、E1_User makes a Call to EUT then EUT_User receives the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select 255 as Common ID on QE1 Select a different Common ID on EUT Verdict Step Test SequencePass Fail 1 Cause
25、QE1 to make a call 2 Check that EUT receives the call yes no Observations: ETSI ETSI TS 102 587-6 V1.1.1 (2008-07) 8 Test Description Identifier: TD_PMR_0824_02 Test Purpose: TP_PMR_0824_02 Summary: All call with all call callee ID Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_0824, RQ
26、_001_0824 - ISF QE1 and EUT with QE1 and EUT in standby and using_compatible_vocoders ensure that when QE1 and EUT using Common_ID 255 and QE1_User makes a Call to EUT then EUT_User receives the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF
27、channel for both QE1 and EUT Select 255 as Common ID on both QE1 and EUT Verdict Step Test SequencePass Fail 1 Cause QE1 to make a call 2 Check that EUT receives the call Yes No Observations: Test Description Identifier: TD_PMR_0824_03 Test Purpose: TP_PMR_0824_03 Summary: All call with all call cal
28、lee ID Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_0824, RQ_001_0824 - ISF QE1 and EUT with QE1 and EUT in standby and using_compatible_vocoders ensure that when EUT uses Common_ID 255 and QE1 uses another Common_ID and QE1_User makes a Call then EUT_User does not receive the Call -
29、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select 255 as Common ID on EUT Select a different value of Common ID on QE1 Verdict Step Test SequencePass Fail 1 Cause QE1 to make a call 2 Check if EUT receives the call N
30、o Yes Observations: ETSI ETSI TS 102 587-6 V1.1.1 (2008-07) 9 Test Description Identifier: TD_PMR_0858_01 Test Purpose: TP_PMR_0858_01 Summary: All call with all call callee ID Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_0858, RQ_001_0858 - ISF QE1 and EUT with QE1 and EUT in standby
31、 and using_compatible_vocoders ensure that when EUT uses Common_ID 255 and QE1 uses another Common_ID and QE1_User makes a Call then EUT_User does not receive the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Sel
32、ect 255 as Common ID on EUT and QE1 Verdict Step Test SequencePass Fail 1 Cause QE1 to make a call 2 Check if EUT receives the call Yes No Observations: Test Description Identifier: TD_PMR_0858_02 Test Purpose: TP_PMR_0858_02 Summary: All call with all call callee ID Roles: ISF Configuration: CF_IDP
33、MRISF_01 References: RQ_001_0858, RQ_001_0858 - ISF QE1 and EUT with QE1 and EUT in standby and using_compatible_vocoders ensure that when EUT uses Common_ID 255 and QE1 uses Common_ID 255 and QE1_User makes a Call then EUT_User does receive the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
34、xxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select 255 as Common ID on EUT Select a different value of Common ID on QE1 Verdict Step Test SequencePass Fail 1 Cause QE1 to make a call 2 Check if EUT receives the call No Yes Observations: End group 1.1 ETSI ETSI TS
35、102 587-6 V1.1.1 (2008-07) 105.1.2 channel access Group 1.2 Channel Access Test Description Identifier: TD_PMR_1006_01 Test Purpose: TP_PMR_1006_01 Summary: Automatic call termination within 180 seconds Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_1006 - ISF QE1 and EUT with (EUT and
36、QE1 using same Common_ID and powersave_disabled and using_compatible_vocoders) and QE1 and EUT in standby ensure that when EUT_User makes a PTT_Call and PTT_Key is not released then QE1_User receives PTT_Call and EUT terminates the PTT_Call after 180 seconds - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
37、xxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select same Common ID for both QE1 and EUT Verdict Step Test SequencePass Fail 1 Cause EUT to make a voice call to QE1 and start timer 2 Keep EUT transmitting until QE1 stops receiving the voice call 3 Stop timer
38、 when QE1 stops receiving 4 Check that timer value is 180 seconds or less Yes No Observations: Test Description Identifier: TD_PMR_1006_02 Test Purpose: TP_PMR_1006_02 Summary: Automatic call termination within 180 seconds Roles: CSF Configuration: CF_IDPMRCSF_01 References: RQ_001_1006 - CSF QE1 an
39、d EUT with (EUT and QE1 powersave_disabled and using_compatible_vocoders) QE1 in standby ensure that when EUT_User makes a Voice_Transmission addressed to QE1 and PTT_Key is not released then QE1_User receives Voice_Transmission and EUT terminates the Voice_Transmission after 180 seconds - xxxxxxxxx
40、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select or enter a talkgroup address for QE1 on EUT Verdict Step Test SequencePass Fail 1 Cause EUT to make a voice call to QE1 and start timer 2 Keep EUT transmitting until QE1 stops
41、 receiving the voice call 3 Stop timer when QE1 stops receiving 4 Check that timer value is 180 seconds or less Yes No Observations: ETSI ETSI TS 102 587-6 V1.1.1 (2008-07) 11Test Description Identifier: TD_PMR_1006_03 Test Purpose: TP_PMR_1006_03 Summary: Automatic call termination within 180 secon
42、ds and call resume Roles: ISF Configuration: CF_IDPMRISF_01 References: RQ_001_1006 - ISF QE1 and EUT with (EUT and QE1 using same Common_ID and powersave_disabled and using_compatible_vocoders) and EUT in call_timeout_terminated ensure that when EUT_User releases and presses PTT_Key again then QE1_
43、User receives PTT_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select same Common ID for both QE1 and EUT Verdict Step Test SequencePass Fail 1 Cause EUT to transmit until QE1 stops receiving the call 2 De-key t
44、he transmitter of the EUT 3 Re-key the transmitter of the EUT 4 Check if QE1 starts to receive the call from EUT Yes No Observations: Test Description Identifier: TD_PMR_1006_04 Test Purpose: TP_PMR_1006_04 Summary: Automatic call termination within 180 seconds and call resume Roles: CSF Configurati
45、on: CF_IDPMRCSF_01 References: RQ_001_1006 - CSF QE1 and EUT with (EUT and QE1 powersave_disabled) and EUT in call_timeout_terminated ensure that when EUT_User releases and presses the PTT_Key again then QE1_User receives Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
46、xxxx Pre-test conditions: Select same RF channel for both QE1 and EUT Select or enter a talkgroup address for QE1 on EUT Verdict Step Test SequencePass Fail 1 Cause EUT to transmit until QE1 stops receiving the call 2 De-key the transmitter of the EUT 3 Re-key the transmitter of the EUT 4 Check if Q
47、E1 starts to receive the call from EUT Yes No Observations: ETSI ETSI TS 102 587-6 V1.1.1 (2008-07) 12Test Description Identifier: TD_PMR_1008_01 Test Purpose: TP_PMR_1008_01 Summary: Channel access in own call Roles: ISF Configuration: CF_IDPMRISF_02 References: RQ_001_1008, RQ_001_1008 - ISF QE1,
48、QE2 and EUT with (EUT and QE1 and QE2) using the same Common_ID and using_compatible_vocoders) and QE1 is transmitting ensure that when EUT_User makes PTT_Call then QE2_User receives the PTT_Call from EUT - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Pre-test conditions: Select sam
49、e RF channel for QE1, QE2 and EUT Select same Common ID for QE1, QE2 and EUT Verdict Step Test SequencePass Fail 1 Cause QE1 to make a voice call to QE2 2 Cause EUT to make a voice call to QE2 while QE1 is still transmitting 3 Check if QE2 receives the voice call from EUT Yes No Observations: Test Description Identifier: TD_PMR_1008_02 Test Purpo
