1、 ETSI TS 102 710-1 V5.2.1 (2016-02) Core Network and Interoperability Testing (INT); Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks; Conformance Test Specification; (3GPPTM Release 10); Part 1: Protocol Implementation Conformance Statement
2、(PICS) TECHNICAL SPECIFICATION ETSI ETSI TS 102 710-1 V5.2.1 (2016-02)2 Reference RTS/INT-00111-1 Keywords interworking, ISUP, PICS, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C A
3、ssociation but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
4、print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kep
5、t on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you
6、find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and micro
7、film except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights r
8、eserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned
9、 by the GSM Association. ETSI ETSI TS 102 710-1 V5.2.1 (2016-02)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions, symbols, abbreviations and conformance . 6g33.1 De
10、finitions 6g33.2 Symbols 6g33.3 Abbreviations . 6g33.4 Conformance to this PICS pro forma specification 6g34 PICS pro forma for ETSI TS 129 163 and ETSI TS 129 658 7g34.0 The right to copy 7g34.1 Guidance for completing the PICS pro forma (purposes and structure) . 7g34.2 Abbreviations and conventio
11、ns 7g34.3 Instructions for completing the PICS pro forma. 8g35 Identification of the implementation 9g35.0 Introduction 9g35.1 Date of the statement 9g35.2 Implementation Under Test (IUT) identification . 9g35.3 System Under Test (SUT) identification 9g35.4 Product supplier 9g35.5 Client (if differe
12、nt from product supplier) 10g35.6 PICS contact person . 10g35.7 Global statement of conformance . 11g36 Statement of conformance to ETSI TS 129 163 and ETSI TS 129 658 . 11g36.1 Major capabilities . 11g36.2 Basic call capabilities . 11g36.3 Simulation service capabilities . 14g36.4 Timers 16g3Histor
13、y 17g3ETSI ETSI TS 102 710-1 V5.2.1 (2016-02)4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be f
14、ound in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR
15、Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This
16、Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering the Conformance Test Specification to the Interworking between the IP Multimedia (IM) Core Network (CN) subs
17、ystem and Circuit Switched (CS) networks (Release 10), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS); LTE; Interworking between the IP Multimedia (IM) Core Ne
18、twork (CN) subsystem and Circuit Switched (CS) networks (3GPP TS 29.163 Release 10)“. 2 ETSI TS 129 658: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; TISPAN; SIP Transfer of IP Multimedia Service Tariff Information; Protocol specific
19、ation (3GPP TS 29.658 Release 10)“. 3 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and fra
20、mework - Part 7: Implementation Conformance Statements“. 5 ANSI Standard ATIS-1000113.2005(R2010) (07-2005): “Signalling System No. 7 (SS7) - Integrated Services Digital Network (ISDN) User Part“. 2.2 Informative references References are either specific (identified by date of publication and/or edi
21、tion number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publicat
22、ion, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Void. i.2 Void. i.3 Void. i.4 Void. i.5 Void. i.6 Void. ETSI ETSI TS 102 710-1
23、V5.2.1 (2016-02)6 i.7 Void. i.8 Void. 3 Definitions, symbols, abbreviations and conformance 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 129 163 1, ETSI TS 129 658 2, ISO/IEC 9646-1 3, ISO/IEC 9646-7 4 and the following apply: PICS pro forma: d
24、ocument, in the form of a questionnaire, which when completed for an implementation or system becomes a PICS Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification Protocol Implementation Conformance Statement (PICS): statement made by the suppl
25、ier of an implementation or system claimed to conform to a given protocol specification, stating which capabilities have been implemented NOTE: This may contain additional information. 3.2 Symbols For the purposes of the present document, the symbols given in ETSI TS 129 163 1 and ETSI TS 129 658 2
26、apply. 3.3 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 129 163 1, ETSI TS 129 658 2 and the following apply: ICS Implementation Conformance Statement IUT Implementation Under Test PICS Protocol ICS SCS System Conformance Statement SUT System Under Test
27、3.4 Conformance to this PICS pro forma specification If it claims to conform to the present document, the actual PICS pro forma to be filled in by a supplier shall be technically equivalent to the text of the PICS pro forma given in clause 4, and shall preserve the numbering/naming and ordering of t
28、he pro forma items. A PICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance with the guidance for completion given in clause 4.1. ETSI ETSI TS 102 710-1 V5.2.1 (2016-02)7 4 PICS pro forma for ETSI TS 129 163 and ETSI TS 129 658 4.0 The right to copy
29、 Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS pro forma in this clause so that it can be used for its intended purposes and may further publish the completed PICS. 4.1
30、Guidance for completing the PICS pro forma (purposes and structure) The purpose of this PICS pro forma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI TS 129 163 1 and ETSI TS 129 658 2 may provide information about the implementation in a standa
31、rdized manner. The PICS pro forma is subdivided into clauses for the following categories of information: - guidance for completing the PICS pro forma; - identification of the implementation; - identification of the ETSI TS 129 163 1 and ETSI TS 129 658 2; - global statement of conformance; - Statem
32、ent of conformance to ETSI TS 129 163 1 and ETSI TS 129 658 2: - Major capabilities - Basic call capabilities - Simulation service capabilities - Timers 4.2 Abbreviations and conventions The PICS pro forma contained in this clause is comprised of information in tabular form in accordance with the gu
33、idelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the impl
34、ementation?“. Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“)
35、 depends on the support of other optional or conditional items. “i“ is an integer identifying a unique conditional status expression which is defined immediately following the table. ETSI ETSI TS 102 710-1 V5.2.1 (2016-02)8 Reference column The reference column makes reference to ETSI TS 129 163 1 a
36、nd ETSI TS 129 658 2 except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not
37、supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). In case of protocol, the following text should be added: NOTE: As stated in ISO/IEC 9646-7 4, support for a received PDU requires the ability t
38、o parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Values allowed column The values allowed column contains the type, the list, the
39、 range, or the length of values allowed. The following notations are used: - range of values: example: 5 20 - list of values: , , ., example: 2, 4, 6, 8, 9 example: 1101B, 1011B, 1111B example: 0AH, 34H, 2FH - list of named values: (), (), ., () example: reject(1), accept(2) - length: size ( ) examp
40、le: size (1 8) Values supported column The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated. 4.3 Instructions for completing the PICS pro forma The supplier of the i
41、mplementation shall complete the PICS pro forma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation described in clause 4.2. If necessary, the supplier may provide additional comments in spa
42、ce at the bottom of the tables or separately. More detailed instructions are given at the beginning of the different clauses of the PICS pro forma. ETSI ETSI TS 102 710-1 V5.2.1 (2016-02)9 5 Identification of the implementation 5.0 Introduction Identification of the Implementation Under Test (IUT) a
43、nd the system in which it resides (the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who can
44、 answer queries regarding information supplied in the PICS should be named as the contact person. 5.1 Date of the statement . 5.2 Implementation Under Test (IUT) identification IUT name: . . IUT version: . 5.3 System Under Test (SUT) identification SUT name: . . Hardware configuration: . . . Operati
45、ng system: . 5.4 Product supplier Name: . Address: . . . ETSI ETSI TS 102 710-1 V5.2.1 (2016-02)10 Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . 5.5 Client (if different from product supplier) Name: . Address: . . . Telephone number: . Facsimile number: . E-
46、mail address: . Additional information: . . 5.6 PICS contact person (A person to contact if there are any queries concerning the content of the PICS) Name: . Telephone number: . Facsimile number: . ETSI ETSI TS 102 710-1 V5.2.1 (2016-02)11 E-mail address: . Additional information: . . . 5.7 Global s
47、tatement of conformance Are all mandatory capabilities implemented? (Yes/No) . NOTE: Answering “No“ to this question indicates non-conformance to the ETSI TS 129 163 1 and ETSI TS 129 658 2 specification. Non-supported mandatory capabilities are to be identified in the ICS, with an explanation of wh
48、y the implementation is non-conforming, on pages attached to the PICS pro forma. 6 Statement of conformance to ETSI TS 129 163 and ETSI TS 129 658 6.1 Major capabilities Table 6.1.1: Major capabilities Item Item description Reference Status Support 1 Is the System Under Test interconnected with an I
49、SUP network? 7.2 o.1 2 Is the System Under Test interconnected with a BICC network? 7.3 o.1 o.1: It is mandatory to support exactly one of these items. Comments: 6.2 Basic call capabilities Table 6.2.1: Basic call capabilities Item Item description Reference Status Support 1 Is the System able to support preconditions requested in the Supported header or Require header? 7.2.3.1.1 o 2 Does the SUT sends the IAM indicating the COT procedure immediately after the reception of the INVITE and precondi
