ETSI TS 102 721-3-2013 Satellite Earth Stations and Systems (SES) Air Interface for S-band Mobile Interactive Multimedia (S-MIM) Part 3 Physical Layer Specification Return Link Asy.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN ISO 5610-6-2015 Tool holders with rectangular shank for indexable inserts - Part 6 Style G (ISO 5610-6 2014)《可转位刀片用方柄刀杆 第6部分 G型(ISO 5610-6-2014)》.pdf

DIN ISO 5610-7-2015 Tool holders with rectangular shank for indexable inserts - Part 7 Style J (ISO 5610-7 2014)《可转位刀片用方柄刀杆 第7部分 J型(ISO 5610-7-2014)》.pdf

DIN ISO 5610-8-2015 Tool holders with rectangular shank for indexable inserts - Part 8 Style K (ISO 5610-8 2014)《可转位刀片用方柄刀杆 第8部分 K型(ISO 5610-8-2014)》.pdf

DIN ISO 5610-9-2015 Tool holders with rectangular shank for indexable inserts - Part 9 Style L (ISO 5610-9 2014)《可转位刀片用方柄刀杆 第9部分 L型(ISO 5610-9-2014)》.pdf

DIN ISO 5620-1-1994 Shipbuilding and marine structures filling connection for drinking water tanks general requirements identical with ISO 5620-1 1992《造船和船舶结构 饮用水箱注水接头 第1部分 一般要求 等同.pdf

DIN ISO 5620-2-1994 Shipbuilding and marine structures filling connection for drinking water tanks components identical with ISO 5620-2 1992《造船和船舶结构 饮用水箱注水接头 第2部分 部件 等同采用 ISO 5620-.pdf

DIN ISO 5630-1-1993 Paper and board accelerated ageing part 1 dry heat treatment at 105 C identical with ISO 5630-1 1991《纸和纸板 加速老化 第1部分 在105℃时的干热处理》.pdf

DIN ISO 5630-3-1997 Paper and board - Accelerated ageing - Part 3 Moist heat treatment at 80 C and 65 % relative humidity (ISO 5630-3 1996)《纸和纸板 加速老化 第3部分 80℃和65％相对湿度下的湿热处理》.pdf

DIN ISO 5630-4-2017 Paper and board - Accelerated ageing - Part 4 Dry heat treatment at 120 or 150 C (ISO 5630-4 1986)《纸和纸板 加速老化 第4部分 在120℃或150℃下的干热处理(ISO 5630-4-1986)》.pdf