1、 ETSI TS 102 726-3 V2.2.1 (2015-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for Mode 1 of the digital Private Mobile Radio (dPMRTM); Part 3: Interoperability Test Suite Structure and Test Purposes (TSS Essential, or potentially Essential, IPRs notified to
2、ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the exi
3、stence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spec
4、trum Matters (ERM). The present document is part 3 of a multi-part deliverable covering the Conformance testing for Modes 1and 2 of the digital Private Mobile Radio (dPMR) as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS) proforma“; Part 2: “Test Suite Structure and
5、Test Purposes (TSS Part 3: “Interoperability Test Suite Structure and Test Purposes (TSS Internet Protocol Testing (IPT); IPv6 Testing: Methodology and Framework“. 3 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstr
6、act Test Suite specification“. 4 ETSI TS 102 587-3: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 3: Requirements catalogue“. 2.2 Informative references References are either specific (identified by date of publication and/or edition
7、 number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication,
8、 ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI ES 202 553: “Methods for testing and Specification (MTS); TPLan: A notation fo
9、r expressing test Purposes“. i.2 ETSI TS 102 726-1: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for Mode 1 of the digital Private Mobile Radio (dPMRTM); Part 1: Protocol Implementation Conformance Statement (PICS) proforma“. ETSI ETSI TS 102 726-3 V2.2.1 (201
10、5-10)6 3 Abbreviations For the purposes of the present document, the following abbreviations apply: BS2L Mode 2 Repeater using Limited Access Mode BS2T Mode 2 Repeater using Transparent Access Mode CF (Test) ConFiguration dPMR digital Private Mobile Radio EUT Equipment Under Test M1 Mode 1 M2 Mode 2
11、 OACSU Off Air Call Set-Up QE Qualified EquipmentNOTE: That complies with TS 102 658 1. RC Requirements Catalogue RQ ReQuirementTP Test Purpose TSS Test Suite Structure 4 Test Suite Structure (TSS) The Test Suite Structure is based on the dPMR Requirements Catalogue 4. It is defined by the groups wi
12、thin the following TPLan specification of test purposes. The numbering is not contiguous so that new TPs can be added at a later date without the need to completely renumber the TSS groups. The test purposes have been divided into four groups: Group 1: Common requirements. Group 2: Services. Group 3
13、: Channel access. Group 4: Addressing The sub-grouping of these three groups follows the structure of the RC. Some of the sub-groups of the RC contained no testable requirement. Headings for those sub-groups are in this test purpose document in the node group to give a full view on the relation betw
14、een RQ and TSS&TP. 5.1 Framing 5.1.1 Addressing 5.1.1.1 All Call 5.1.1.2 Dialling Plan 5.1.1.3 Talking Party ID 5.1.2 Base Station framing 5.1.3 Channel Access 5.1.3.0 General 5.1.3.1 OACSU 5.1.3.2 PTT Call 5.1.4 END frame 5.1.5 Message frame 5.1.5.1 Message Information field 5.1.6 Payload 5.1.6.1 P
15、acket data 5.1.6.2 Short data 5.1.6.3 T1 data 5.1.6.4 T2 data 5.1.6.5 Voice 5.1.6.5.1 Voice and attached data 5.1.6.5.2 Late entry 5.1.6.5.3 Slow user data 5.1.7 Power save 5.1.8 Superframe 5.1.8.1 Traffic channel 5.1.8.2 Voice TCH ETSI ETSI TS 102 726-3 V2.2.1 (2015-10)7 5 Test Purposes (TP) 5.0 Pr
16、eamble The test purposes have been written in the formal notation TPlan. Configurations that are referenced by test purposes are shown in annex A. TPLan user definitions are listed in annex B. 5.1 Framing 5.1.1 Addressing 5.1.1.1 All Call Void. 5.1.1.2 Dialling Plan TP id : TP_PMR_1403_01 summary :
17、The user should enter or select a string of digits and then press a button to initiate the call RQ ref : RQ_001_1403 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with QE1 and EUT in standby and EUT Complies_with_Standard_User_Interface ensure that when
18、 EUT_User enters or selects an address of QE1 then QE1_User does not receive the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1403_02 summary : The user should enter a string of digits and then press a button to initiate the call RQ ref : RQ_001_1403 TP type :
19、interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with QE1 and EUT in standby and EUT Complies_with_Standard_User_Interface ensure that when EUT_User enters or selects an address of QE1 before EUT_User presses the hash_key or dedicated_send_key then QE1_User receives
20、 the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1412_01 summary : Some numeric address are not permitted RQ ref : RQ_001_1409 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with EUT Complies_with_Standard_User_Int
21、erface and QE1 and EUT in standby ensure that when EUT_User enters or selects a non_dialable_address and presses dedicated_send_key then EUT indicates an error - audible or visible prompt - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 726-3 V2.2.1 (2015-10)8 TP id :
22、 TP_PMR_1415_01 summary : Radio receiving a talkgroup call - using wildcard RQ ref : RQ_001_1415 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with QE1 and EUT in standby and QE1 Complies_with_Standard_User_Interface ensure that when QE1_User enters or
23、selects an EUT address containing an asterisk_symbol in one of the last four digits and presses the hash_key or dedicated_send_key then EUT_User receives a TalkGroup_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1415_02 summary : Radio receiving a talkgroup call
24、 RQ ref : RQ_001_1415 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with (EUT programmed with a talkgroup address) and QE1 Complies_with_Standard_User_Interface and QE1 and EUT in standby ensure that when QE1_User enters or selects the talkgroup_address
25、 of the EUT and presses the hash_key or dedicated_send_key then EUT_User receives the TalkGroup_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1417_01 summary : Abbreviated dialled digit to address mapping RQ ref : RQ_001_1417 TP type : interoperability Role : M1
26、, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with (EUT Complies_with_Standard_User_Interface and abbreviated_dialling_available) and QE1 in standby ensure that when EUT_User enters or selects an abbreviated_dialling_string of QE1 and presses the hash_key or dedicated_send_key then QE1_Us
27、er receives the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 726-3 V2.2.1 (2015-10)9 TP id : TP_PMR_1417_02 summary : Abbreviated dialling string with wildcard and no match RQ ref : RQ_001_1417 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I
28、 - QE1 and EUT TD ref : TBD with (EUT Complies_with_Standard_User_Interface and abbreviated_dialling_available) EUT and QE1 addresses are same except for last two or more digits EUT and QE1 in standby ensure that when EUT_User enters or selects the asterisk_symbol and presses the hash_key or dedicat
29、ed_send_key then QE1_User does not receive the Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1417_03 summary : Abbreviated dialling string with wildcard RQ ref : RQ_001_1417 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref :
30、 TBD with (EUT Complies_with_Standard_User_Interface and abbreviated_dialling_available) EUT and QE1 addresses are same except for the last digit EUT and QE1 in standby ensure that when EUT_User enters or selects the asterisk_symbol and presses the dedicated_send_key then QE1_User receives the Call
31、- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1418_01 summary : Talkgroup call RQ ref : RQ_001_1418 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with (EUT Complies_with_Standard_User_Interface and an address input mask
32、enabled covering at least one of the last four digits) and (EUT and QE1 addresses having the same digits outside of the mask and in standby) ensure that when EUT_User enters or selects a masked_dialling_string of QE1 containing an asterisk_symbol as the last digit and presses the hash_key or dedicat
33、ed_send_key then QE1_User receives the TalkGroup_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 726-3 V2.2.1 (2015-10)10 TP id : TP_PMR_1418_02 summary : Talkgroup call RQ ref : RQ_001_1418 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1
34、and EUT TD ref : TBD with (EUT Complies_with_Standard_User_Interface and abbreviated_dialling_available and an address input mask is enabled covering at least one of the last four digits) and (EUT and QE1 addresses having the same digits outside of the mask and in standby) ensure that when EUT_User
35、enters or selects an abbreviated_masked_dialling_string of QE1 containing an asterisk_symbol as the last digit and presses the hash_key or dedicated_send_key then QE1_User receives the TalkGroup_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1420_01 summary : Bro
36、adcast plan RQ ref : RQ_001_1420 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with EUT Complies_with_Standard_User_Interface and QE1 programmed with a talkgroup address QE1 and EUT in standby ensure that when EUT_User enters a broadcast_command contain
37、ing a talkgroup_address of QE1 and presses dedicated_send_key then QE1_User receives the Broadcast_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1420_02 summary : Broadcast call - abbreviated dialling RQ ref : RQ_001_1420 TP type : interoperability Role : M1, M2
38、 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with (EUT Complies_with_Standard_User_Interface and abbreviated_dialling_available) and EUT and QE1 addresses differing in one or more of the last digits QE1 and EUT in standby ensure that when EUT_User enters a broadcast_command containing a vali
39、d abbreviated_dialling_string of QE1 containing one or more asterisk symbols and presses the hash_key or dedicated_send_key then QE1_User receives the Broadcast_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 726-3 V2.2.1 (2015-10)11 TP id : TP_PMR_1421_01 summa
40、ry : Status call RQ ref : RQ_001_1421 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with EUT Complies_with_Standard_User_Interface and QE1 and EUT in standby ensure that when EUT_User enters a status_command containing a code between 0 and 31 and contai
41、ning the address of QE1 and presses the hash_key or dedicated_send_key then QE1_User receives the Status_Call indicating the selected code - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1421_02 summary : Status call - wrong status code entered RQ ref : RQ_001_1421 TP
42、type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with EUT Complies_with_Standard_User_Interface QE1 and EUT in standby ensure that when EUT_User enters a status_command containing a code greater than 31 and containing the address of QE1 and presses the dedica
43、ted_send_key then EUT indicates an error - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1423_01 summary : Force talkgroup service RQ ref : RQ_001_1423 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with EUT Complies_with_S
44、tandard_User_Interface and QE1 and EUT in standby ensure that when EUT_User enters a talkgroup_command containing the address of QE1 and presses the dedicated_send_key then QE1_User receives the TalkGroup_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 726-3 V2.
45、2.1 (2015-10)12 TP id : TP_PMR_1423_02 summary : Force talkgroup service - abbreviated dialling RQ ref : RQ_001_1423 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with (EUT Complies_with_Standard_User_Interface and abbreviated_dialling_available) and EU
46、T and QE1 addresses differing in one or more of the last digits QE1 and EUT in standby ensure that when EUT_User enters a talkgroup_command containing a valid abbreviated_dialling_string of QE1 and presses hash_key or dedicated_send_key then QE1_User receives the TalkGroup_Call - xxxxxxxxxxxxxxxxxxx
47、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 5.1.1.3 Talking Party ID TP id : TP_PMR_0803_01 summary : Support of Talking Party ID RQ ref : RQ_001_0803 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with (EUT and QE1 with powersave_disabled) and EUT in sta
48、ndby ensure that when QE1_User makes an Individual_Call to EUT then EUT indicates the address of QE1 - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0803_02 summary : Support of Talking Party ID RQ ref : RQ_001_0803 TP type : interoperability Role : M1, M2 config ref: CF_dPMR_01_I - QE1 and EUT TD ref : TBD with (EUT and QE1 with powersave_disabled) and EUT in standby ensure that when QE1_User makes a Group_Call to EUT then EUT
