ETSI TS 102 744-1-2-2015 Satellite Earth Stations and Systems (SES) Family SL Satellite Radio Interface (Release 1) Part 1 General Specifications Sub-part 2 System Operation Overvi.pdf

上传人:dealItalian200 文档编号:739448 上传时间:2019-01-11 格式:PDF 页数:57 大小:1.56MB
下载 相关 举报
ETSI TS 102 744-1-2-2015 Satellite Earth Stations and Systems (SES) Family SL Satellite Radio Interface (Release 1) Part 1 General Specifications Sub-part 2 System Operation Overvi.pdf_第1页
第1页 / 共57页
ETSI TS 102 744-1-2-2015 Satellite Earth Stations and Systems (SES) Family SL Satellite Radio Interface (Release 1) Part 1 General Specifications Sub-part 2 System Operation Overvi.pdf_第2页
第2页 / 共57页
ETSI TS 102 744-1-2-2015 Satellite Earth Stations and Systems (SES) Family SL Satellite Radio Interface (Release 1) Part 1 General Specifications Sub-part 2 System Operation Overvi.pdf_第3页
第3页 / 共57页
ETSI TS 102 744-1-2-2015 Satellite Earth Stations and Systems (SES) Family SL Satellite Radio Interface (Release 1) Part 1 General Specifications Sub-part 2 System Operation Overvi.pdf_第4页
第4页 / 共57页
ETSI TS 102 744-1-2-2015 Satellite Earth Stations and Systems (SES) Family SL Satellite Radio Interface (Release 1) Part 1 General Specifications Sub-part 2 System Operation Overvi.pdf_第5页
第5页 / 共57页
点击查看更多>>
资源描述

1、 ETSI TS 102 744-1-2 V1.1.1 (2015-10) Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 1: General Specifications; Sub-part 2: System Operation Overview TECHNICAL SPECIFICATION ETSI ETSI TS 102 744-1-2 V1.1.1 (2015-10) 2 Reference DTS/SES-00299-1-2 Key

2、words 3GPP, GPRS, GSM, GSO, interface, MSS, radio, satellite, TDM, TDMA, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (

3、06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without

4、 the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the

5、present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one

6、 of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content

7、 of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Mark

8、s of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 744-1-2 V1.1.1 (2015-10) 3

9、 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 7g33 Abbreviations . 8g34 Stratum introduction . 9g35 Mobility Management (MM) . 9g35.1 General principles. 9g35.2 RR

10、C States (Idle and Connected Mode). 10g35.3 UE and Network Operation Modes 11g35.4 Mobility Management Service States . 12g35.4.0 General 12g35.4.1 PS Domain Service State Machine . 12g35.4.1.0 General 12g35.4.1.1 PMM-DETACHED State 12g35.4.1.2 PMM-IDLE State 12g35.4.1.3 PMM-CONNECTED State . 13g35.

11、4.1.4 State Transitions and Functions 13g35.4.1.5 Periodic Routing Area Update Timer 14g35.4.1.6 Mobile Reachable Timer . 14g35.4.2 CS Domain Service State Machine . 14g35.4.2.0 General 14g35.4.2.1 CMM-DETACHED State . 14g35.4.2.2 CMM-IDLE State . 15g35.4.2.3 CMM-CONNECTED State 15g35.5 Connection M

12、aintenance 15g35.6 Mobility Management Procedures . 16g36 Numbering, Addressing and Identification 16g36.0 General . 16g36.1 Non-Access Stratum . 16g36.1.0 General 16g36.1.1 PLMN Identifier (PLMN ID) 16g36.1.2 International Mobile Subscriber Identity (IMSI) 16g36.1.3 Temporary Mobile Subscriber Iden

13、tity (TMSI) and Packet Temporary Mobile Subscriber Identity (P-TMSI) 16g36.1.4 International Mobile Station Equipment Identity/Software Version (IMEI/IMEISV) . 16g36.1.5 Location Area Identification (LAI) . 17g36.1.6 Routing Area Identification (RAI) 17g36.1.7 Mobile Station International PSTN/ISDN

14、Number (MSISDN) . 18g36.1.8 Mobile Station Roaming Number (MSRN) 18g36.1.9 Mobile Station International Data Number . 18g36.1.10 IPv4 Address . 18g36.1.11 IPv6 Address . 18g36.1.12 Access Point Name . 18g36.2 Access Stratum (Usl Stratum) 18g36.2.1 UE Identification 18g36.2.1.0 General 18g36.2.1.1 RR

15、C-IDLE Mode 18g36.2.1.2 RRC-CONNECTED Mode . 18g3ETSI ETSI TS 102 744-1-2 V1.1.1 (2015-10) 4 6.2.2 Radio Resource to Network Layer UE Identity Association 19g36.2.3 Logical Radio Interface Connection Identifiers 19g36.2.4 Other Identifiers 19g36.2.4.1 Spot Beam ID 19g36.3 Access Stratum (Iu Stratum)

16、 19g36.3.0 General 19g36.3.1 PLMN Identifier (PLMN ID) 19g36.3.2 CN Domain Identifier . 19g36.3.3 CN Domain Indicator 19g36.3.4 RNC Identifier 20g36.3.5 RNC Addresses. 20g36.3.6 Service Area Identifier (SAI) 20g36.3.7 Permanent NAS UE Identity . 21g36.3.8 Temporary NAS UE Identity 21g36.3.9 Radio Ac

17、cess Bearer Identity (RAB ID). 21g36.3.10 Iu Signalling Connection Identifier 22g36.3.11 Paging Area Identity . 22g37 System Information 22g37.1 General Principles 22g37.2 System Information in Idle and Connected Modes 22g37.3 System Information Elements 23g37.3.0 General 23g37.3.1 Access Stratum Sy

18、stem Information . 23g37.3.1.0 General 23g37.3.1.1 Primary Bearer 23g37.3.1.2 PLMN ID 24g37.3.1.3 Access Control 24g37.3.1.4 Spot Beam Map . 24g37.3.1.5 Common Signalling Retry . 24g37.3.1.6 GPS Policy Info 24g37.3.2 Non-Access Stratum System Information . 24g38 UE Idle Mode Behaviour . 25g38.1 NAS/

19、AS Functional Divisions . 25g38.2 Idle Mode Procedures . 25g38.2.1 Non-Access Stratum . 25g38.2.2 Access Stratum (Usl Stratum) . 25g38.2.2.0 General 25g38.2.2.1 PLMN Discovery 26g38.2.2.2 PSAB Discovery . 26g38.2.2.2.1 Method. 26g38.2.2.2.2 Spot Beam Selection Methods . 26g39 Sleep Mode . 26g3Annex

20、A (informative): System operation 28g3A.1 Introduction 28g3A.1.1 Network Architecture . 28g3A.1.2 Adaptation Layer 28g3A.2 Example Call Flows . 28g3A.2.1 User Equipment Start up Sequence 28g3A.2.2 Selection of Primary Shared Access Bearer . 29g3A.2.2.0 General 29g3A.2.2.1 Spot Beam Hierarchy 29g3A.2

21、.2.2 Regional Beam Selection 30g3A.2.2.3 Narrow Beam Access 30g3A.2.3 PSAB Selection Process . 30g3A.2.4 Registration on the Satellite Network . 31g3A.2.5 Attach Procedure and Combined Procedures . 32g3A.2.5.0 General 32g3A.2.5.1 IMSI Attach Procedure . 33g3ETSI ETSI TS 102 744-1-2 V1.1.1 (2015-10)

22、5 A.2.5.2 GPRS Attach Procedure 35g3A.2.6 Mobile Originated Circuit Switched Call Set Up . 36g3A.2.7 Emergency Calls 37g3A.2.8 Mobile Terminated Circuit Switched Call Set Up 40g3A.2.9 Circuit Switched Call Clearing . 42g3A.2.10 Activation of Packet Switched Session, “PDP Context“ 43g3A.2.11 Deactiva

23、tion of Packet Switched Session . 45g3A.2.12 Preservation of PDP context during release of RAB/PS signalling connection . 46g3A.2.12.0 General 46g3A.2.12.1 Temporary Release of a Packet Switched Radio Access Bearer due to Inactivity 46g3A.2.12.1.0 General 46g3A.2.12.1.1 Uplink PDU causing restoratio

24、n of packet switched RAB following Earlier release . 46g3A.2.12.1.2 Downlink PDU causing restoration of Packet Switched RAB following earlier RAB release . 47g3A.2.12.2 Temporary Release of a Packet Switched Signalling Connection due to Inactivity . 48g3A.2.12.2.0 General 48g3A.2.12.2.1 Uplink PDU a

25、rrival causing restoration of PS Signalling connection and RABs following Earlier release . 48g3A.2.12.2.2 Downlink PDU arrival causing restoration of Iu PS Signalling connection and RABs following Earlier release 50g3A.2.13 PS and CS detach . 52g3A.2.13.1 CS Detach, Mobile Originated 52g3A.2.13.2 M

26、obile Initiated Detach via the PS Domain (GPRS Detach, IMSI Detach or combined GPRS/IMSI Detach) 52g3A.2.14 Handover 54g3A.2.14.0 General 54g3A.2.14.1 Radio Access Bearer Set-up and Release . 54g3A.2.14.2 Change in UE Location . 55g3A.2.15 Deregistration . 55g3A.2.16 MBMS Context Activation 56g3A.2.

27、17 MBMS Context Deactivation . 56g3History 57g3ETSI ETSI TS 102 744-1-2 V1.1.1 (2015-10) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available fo

28、r ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http

29、:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essenti

30、al to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document is part 1, sub-part 2 of a multi-part deliverable. Full details of the entire series can be found in ETSI TS 102 744-1

31、-1 i.11. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “mu

32、st not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction This multi-part deliverable (Release 1) defines a satellite radio interface that provides UMTS services to users of mobile terminals via geostationary (GEO) satellites in the frequency range 1 518,000 MHz

33、to 1 559,000 MHz (downlink) and 1 626,500 MHz to 1 660,500 MHz and 1 668,000 MHz to 1 675,000 MHz (uplink). ETSI ETSI TS 102 744-1-2 V1.1.1 (2015-10) 7 1 Scope The present document provides an overview of the Family SL system operation, and describes fundamental UMTS elements such as mobility manage

34、ment, numbering and addressing, and idle mode behaviour as they apply to the Family SL satellite network. In general, these elements are the same for both terrestrial UMTS and the satellite network. Where appropriate, references to 3GPP documents are given, otherwise the text highlights the areas wh

35、ere the terrestrial UMTS and Family SL elements differ. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific referenc

36、es, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time

37、 of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 123 003: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Numbering, addr

38、essing and identification (3GPP TS 23.003 Release 4)“. 2 ETSI TS 123 060: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); General Packet Radio Service (GPRS); Service description; Stage 2 (3GPP TS 23.060 Release 4)“. 3 ETSI TS 123 122: “Univ

39、ersal Mobile Telecommunications System (UMTS); Non-Access-Stratum functions related to Mobile Station (MS) in idle mode (3GPP TS 23.122 Release 4)“. 4 ETSI TS 125 413: “Universal Mobile Telecommunications System (UMTS); UTRAN Iu interface Radio Access Network Application Part (RANAP) signalling (3GP

40、P TS 25.413 Release 4)“. 5 ETSI TS 102 744-1-4: “Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 1: General Specifications; Sub-part 4: Applicable External Specifications, Symbols and Abbreviations“. 6 Recommendation ITU-T E.164: “The international p

41、ublic telecommunication numbering plan“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of

42、the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but th

43、ey assist the user with regard to a particular subject area. i.1 ETSI TS 122 101: “Universal Mobile Telecommunications System (UMTS); Service aspects; Service principles (3GPP TS 22.101 Release 4)“. i.2 ETSI TS 123 221: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecom

44、munications System (UMTS); Architectural requirements (3GPP TS 23.221 Release 4)“. ETSI ETSI TS 102 744-1-2 V1.1.1 (2015-10) 8 i.3 ETSI TS 124 007: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Mobile radio interface signalling layer 3; Ge

45、neral Aspects (3GPP TS 24.007 Release 4)“. i.4 ETSI TS 124 008: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Mobile radio interface Layer 3 specification; Core network protocols; Stage 3 (3GPP TS 24.008 Release 4)“. i.5 ETSI TS 125 331: “

46、Universal Mobile Telecommunications System (UMTS); Radio Resource Control (RRC) protocol specification (3GPP TS 25.331 Release 4)“. i.6 ETSI TS 133 102: “Universal Mobile Telecommunications System (UMTS); 3G security; Security architecture (3GPP TS 33.102 Release 4)“. i.7 Recommendation ITU-T E.212:

47、 “The international identification plan for public networks and subscriptions“. i.8 ETSI TS 122 060: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); General Packet Radio Service (GPRS); Service description; Stage 1 (3GPP TS 22.060 Release 4)

48、“. i.9 ETSI TS 122 011: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Service accessibility (3GPP TS 22.011 Release 4)“. i.10 ETSI TS 125 304: “Universal Mobile Telecommunications System (UMTS); User Equipment (UE) procedures in idle mode

49、and procedures for cell reselection in connected mode (3GPP TS 25.304 Release 4)“. i.11 ETSI TS 102 744-1-1: “Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 1: General Specifications; Sub-part 1: Services and Architectures“. i.12 ETSI TS 102 744-3-1: “Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 3: Control Plane and User Plane Specifications; Sub-part 1: Bearer Control Layer Interface“. i.13 ETSI TS 102 744-3-2: “Satellite Earth Stati

展开阅读全文
相关资源
猜你喜欢
  • DIN EN ISO 22600-1-2015 Health informatics - Privilege management and access control - Part 1 Overview and policy management (ISO 22600-1 2014) German version EN ISO 22600-1 2014《健.pdf DIN EN ISO 22600-1-2015 Health informatics - Privilege management and access control - Part 1 Overview and policy management (ISO 22600-1 2014) German version EN ISO 22600-1 2014《健.pdf
  • DIN EN ISO 22600-2-2015 Health informatics - Privilege management and access control - Part 2 Formal models (ISO 22600-2 2014) German version EN ISO 22600-2 2014《健康信息学 特权管理和访问控制 第2.pdf DIN EN ISO 22600-2-2015 Health informatics - Privilege management and access control - Part 2 Formal models (ISO 22600-2 2014) German version EN ISO 22600-2 2014《健康信息学 特权管理和访问控制 第2.pdf
  • DIN EN ISO 22600-3-2015 Health informatics - Privilege management and access control - Part 3 Implementations (ISO 22600-3 2014) German version EN ISO 22600-3 2014《健康信息学 特权管理和访问控制 .pdf DIN EN ISO 22600-3-2015 Health informatics - Privilege management and access control - Part 3 Implementations (ISO 22600-3 2014) German version EN ISO 22600-3 2014《健康信息学 特权管理和访问控制 .pdf
  • DIN EN ISO 22610-2006 Surgical drapes gowns and clean air suits used as medical devices for patients clinical staff and equipment - Test method to determine the resistance to wet b.pdf DIN EN ISO 22610-2006 Surgical drapes gowns and clean air suits used as medical devices for patients clinical staff and equipment - Test method to determine the resistance to wet b.pdf
  • DIN EN ISO 22612-2005 Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612 2005) German version EN ISO 22612 2005《.pdf DIN EN ISO 22612-2005 Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612 2005) German version EN ISO 22612 2005《.pdf
  • DIN EN ISO 22630-2016 Oilseed meals - Determination of oil content - Rapid extraction method (ISO 22630 2015) German version EN ISO 22630 2015《含油种子 油含量的测定 快速萃取法(ISO 22630-2015) 德文版.pdf DIN EN ISO 22630-2016 Oilseed meals - Determination of oil content - Rapid extraction method (ISO 22630 2015) German version EN ISO 22630 2015《含油种子 油含量的测定 快速萃取法(ISO 22630-2015) 德文版.pdf
  • DIN EN ISO 22649-2016 Footwear - Test methods for insoles and insocks - Water absorption and desorption (ISO 22649 2016) German version EN ISO 22649 2016《鞋靴 内垫和内底的试验方法 吸水率和减湿率(ISO .pdf DIN EN ISO 22649-2016 Footwear - Test methods for insoles and insocks - Water absorption and desorption (ISO 22649 2016) German version EN ISO 22649 2016《鞋靴 内垫和内底的试验方法 吸水率和减湿率(ISO .pdf
  • DIN EN ISO 22665-2013 Ophthalmic optics and instruments - Instruments to measure axial distances in the eye (ISO 22665 2012) German version EN ISO 22665 2012《眼科光学和仪器 眼镜轴向距离的测量仪器(IS.pdf DIN EN ISO 22665-2013 Ophthalmic optics and instruments - Instruments to measure axial distances in the eye (ISO 22665 2012) German version EN ISO 22665 2012《眼科光学和仪器 眼镜轴向距离的测量仪器(IS.pdf
  • DIN EN ISO 22674-2016 Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674 2016) German version EN ISO 22674 2016《牙科 固定和可移动复位的金属材料和器具(ISO 2.pdf DIN EN ISO 22674-2016 Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674 2016) German version EN ISO 22674 2016《牙科 固定和可移动复位的金属材料和器具(ISO 2.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1