1、 ETSI TS 102 870-1 V1.1.1 (2011-03)Technical Specification Intelligent Transport Systems (ITS);Testing;Conformance test specifications for GeoNetworkingBasic Transport Protocol (BTP);Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) proformaETSI ETSI TS 102 870-1 V1.
2、1.1 (2011-03)2Reference DTS/ITS-0030011 Keywords ITS, PICS, testing, transport ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse
3、(06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the refe
4、rence version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or cha
5、nge of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyrigh
6、t Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and
7、the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Org
8、anizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 870-1 V1.1.1 (2011-03)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions
9、and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Conformance requirement concerning PICS 6g3Annex A (normative): BTP PICS Proforma 7 g3A.1 Guidance for completing the ICS proforma . 7g3A.1.1 Purposes and structure 7g3A.1.2 Abbreviations and conventions 7g3A.1.3 Instructions for com
10、pleting the ICS proforma 9g3A.2 Identification of the implementation 9g3A.2.1 Date of the statement 9g3A.2.2 Implementation Under Test (IUT) identification . 10g3A.2.3 System Under Test (SUT) identification 10g3A.2.4 Product supplier 10g3A.2.5 Client (if different from product supplier) 11g3A.2.6 IC
11、S contact person 11g3A.3 Identification of the protocol 12g3A.4 Global statement of conformance . 12g3A.5 Tables . 12g3A.5.1 ITS Station type 12g3A.5.2 Packet Structure 12g3A.5.3 BTP Header 12g3A.5.3.1 BTP-A Header 13g3A.5.3.2 BTP-B Header 13g3A.5.4 Protocol Operation . 13g3Annex B (informative): Bi
12、bliography . 14g3History 15g3ETSI ETSI TS 102 870-1 V1.1.1 (2011-03)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non
13、-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/
14、home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to
15、the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport System (ITS). The present document is part 1 of a multi-part deliverable covering Conformance test specifications for Geonetworking Basic Transport Protocol (BTP) as i
16、dentified below: Part 1: “Test requirements and Protocol Implementation Conformance Statement (PICS) proforma“; Part 2: “ Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)“. ETSI ETSI TS 102 870-1 V1.1.1 (
17、2011-03)51 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for Conformance test specifications for Geonetworking Basic Transport Protocol as defined in TS 102 636-5-1 1 in compliance with the relevant requirements and in accordance with the relev
18、ant guidance given in ISO/IEC 9646-7 3. The supplier of an implementation which is claimed to conform to TS 102 636-5-1 1 is required to complete a copy of the PICS proforma provided in the annex A of the present document. 2 References References are either specific (identified by date of publicatio
19、n and/or edition number or version number) or non-specific. For specific references,only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the
20、expected location might be found at http:/docbox.etsi.org/Reference. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ETSI TS 102 636-5-1 (V1.1.1): “Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; P
21、art 5: Transport Protocols; Sub-part 1: Basic Transport Protocol“. 2 ISO/IEC 9646-1 (1994): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 3 ISO/IEC 9646-7 (1995): “Information technology - Open Systems Interconnect
22、ion - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not app
23、licable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: - terms given in TS 102 636-5-1 1. - terms given in ISO/IEC 9646-1 2 and in ISO/IEC 9646-7 3. In particular, the following terms given in ISO/IEC 9646-1 2 app
24、ly: Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented. The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information ob
25、ject ICS, etc. ETSI ETSI TS 102 870-1 V1.1.1 (2011-03)6ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS. Protocol ICS (PICS): PICS for an implementation or system claimed to conform to a given protocol specification 3.2 Abbre
26、viations For the purposes of the present document, the following abbreviations apply: ICS Implementation Conformance Statement ITS Intelligent Transportation Systems IUT Implementation Under Test PICS Protocol Implementation Conformance Statement SUT System Under Test 4 Conformance requirement conce
27、rning PICS If it claims to conform to the present document, the actual PICS proforma to be filled in by a supplier shall be technically equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming and ordering of the proforma items. An ICS which conforms to t
28、he present document shall be a conforming PICS proforma completed in accordance with the instructions for completion given in clause A.1. ETSI ETSI TS 102 870-1 V1.1.1 (2011-03)7Annex A (normative): BTP PICS Proforma Notwithstanding the provisions of the copyright clause related to the text of the p
29、resent document, ETSI grants that users of the present document may freely reproduce the BTP PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed BTP PICS. A.1 Guidance for completing the ICS proforma A.1.1 Purposes and structure The purp
30、ose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in TS 102 636-5-1 1 may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of informat
31、ion: - guidance for completing the ICS proforma; - identification of the implementation; - identification of the TS 102 636-5-1 1; - global statement of conformance; - PICS proforma tables. A.1.2 Abbreviations and conventions The ICS proforma contained in this annex is comprised of information in ta
32、bular form in accordance with the guidelines presented in ISO/IEC 9646-7 3. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implic
33、itly means “is supported by the implementation?“. ETSI ETSI TS 102 870-1 V1.1.1 (2011-03)8Status column The following notations, defined in ISO/IEC 9646-7 3, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not.
34、 n/a not applicable - in the given context, it is impossible to use the capability. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a
35、n unique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying an uniq
36、ue conditional status expression which is defined immediately following the table. i irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is requested from the supplier. NOTE 1: This use of “i“ status is not to be confused with the suffix “i“ to the “o“
37、and “c“ statuses above. Reference column The reference column indicates the clause numbers of the base standards which correspond to the PICS item of the same row. In the present PICS document and unless otherwise stated, clause numbers in the reference column are always referring to TS 102 636-5-1
38、1. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 3, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer req
39、uired (allowed only if the status is n/a, directly or after evaluation of a conditional status). NOTE 2: As stated in ISO/IEC 9646-7 3, support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is no
40、n-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Values allowed column The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: - range of values: example: 5 20 - list
41、of values: , , ., example: 2 ,4 ,6 ,8 ,9 example: 1101B, 1011B, 1111B example: 0AH, 34H, 2FH ETSI ETSI TS 102 870-1 V1.1.1 (2011-03)9- list of named values: (), (), ., () example: reject(1), accept(2) - length: size ( ) example: size (1 8) Values supported column The values supported column shall be
42、 filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated. References to items For each possible item answer (answer in the support column) within the ICS proforma a unique reference exists, used, for examp
43、le, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the table. If there is more than one support column in a table, the columns are discriminated by letters (a, b, etc.), respectively. EXAMPLE 1: A.5/4 is the
44、reference to the answer of item 4 in table 5 of annex A. EXAMPLE 2: A.6/3b is the reference to the second answer (i.e. in the second support column) of item 3 in table 6 of annex A. Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table titl
45、e indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. A.1.3 Instructions for completing the ICS proforma The supplier of the implementation shall complete the ICS proforma in each of the spaces provided. In particular, an explicit answer shal
46、l be entered, in each of the support or supported column boxes provided, using the notation described in clause A.1.2. If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately. More detailed instructions are given at the beginning of the different
47、 clauses of the ICS proforma. A.2 Identification of the implementation Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration opt
48、ions. The product supplier information and client information should both be filled in if they are different. A person who can answer queries regarding information supplied in the ICS should be named as the contact person. A.2.1 Date of the statement . ETSI ETSI TS 102 870-1 V1.1.1 (2011-03)10A.2.2
49、Implementation Under Test (IUT) identification IUT name: . . IUT version: . A.2.3 System Under Test (SUT) identification SUT name: . . Hardware configuration: . . . Operating system: . A.2.4 Product supplier Name: . Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . ETSI ETSI TS 102 870-1 V1.1.1 (2011-03)11A.2.5 Client (if different from product supplier) Name: . Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . A.2.6 ICS conta
