1、 ETSI TS 102 950-1 V1.6.1 (2017-08) Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 1: Implementation Conformance Statement (ICS) TECHNICAL SPECIFICATION ETSI ETSI TS 102 950-1 V1.6.1 (2017-08)2 Reference RTS/MTS-102950-1ed161 T3Conf Keywords conformance, ICS, testin
2、g, TTCN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded
3、from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or p
4、erceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to r
5、evision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/Co
6、mmiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the writte
7、n authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered
8、for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 950-1 V1.6.1 (2017-08)3 Contents Intellectual Property Rights 4g3Foreword
9、 . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Conformance requirement concerning ICS 7g3Annex A (normative): TTCN-3 conformance ICS pro forma 8g3
10、A.1 Instructions for completing the ICS pro forma. 8g3A.1.1 Other information . 8g3A.1.2 Purposes and structure 8g3A.1.3 Conventions 8g3A.2 Identification of the implementation 9g3A.2.1 Date of the statement 9g3A.2.2 Implementation under Test (IUT) identification 9g3A.2.3 System under Test (SUT) ide
11、ntification . 10g3A.2.4 Product supplier 10g3A.2.5 Client 10g3A.2.6 ICS contact person 10g3A.3 ICS pro forma tables. 10g3A.3.1 Global statement of conformance . 10g3A.4 Additional information for ICS 10g3History 11g3ETSI ETSI TS 102 950-1 V1.6.1 (2017-08)4 Intellectual Property Rights Essential pate
12、nts IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential
13、, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out b
14、y ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are ass
15、erted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement
16、 by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Methods for Testing and Specification (MTS). The present document is part 1 of a multi-part deliverable covering a TTCN-3 conform
17、ance test suite, as identified below: Part 1: “Implementation Conformance Statement (ICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and Implementation eXtra Information for Testing (IXIT)“. Modal verbs terminology In the present document “shall“, “shal
18、l not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct
19、 citation. ETSI ETSI TS 102 950-1 V1.6.1 (2017-08)5 1 Scope The present document provides the Implementation Conformance Statement (ICS) pro forma for the conformance test suite for TTCN-3 as defined in ETSI ES 201 873-1 1 in compliance with the relevant guidance given in the pro forma for TTCN-3 re
20、ference test suite ETSI TS 102 995 4. In the present document only the core language features, specified in ETSI ES 201 873-1 1 have been considered but not the tool implementation (see i.1 and i.2), language mapping (see i.3, i.4 and i.5) and language extension (see e.g. i.6, i.7 and i.8) aspects.
21、The supplier of an implementation which is claimed to conform to ETSI ES 201 873-1 1 is required to complete a copy of the ICS pro forma provided in the annex A of the present document. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edi
22、tion number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected lo
23、cation might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI E
24、S 201 873-1 (V4.8.1): “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 2 ISO/IEC 9646-7 (1994): “Conformance testing methodology and framework - Part 7: Implementation Conformance Statement“. 3 ISO/IEC 9646-1 (1992): “Infor
25、mation Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 1: General concepts“. 4 ETSI TS 102 950-2: “Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 2: Test Suite Structure and Test Purposes (TSS The Testing and Test Con
26、trol Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)“. i.2 ETSI ES 201 873-6: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interface (TCI)“. i.3 ETSI ES 201 873-7: “Methods for Testing and Specification (MTS); The Te
27、sting and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3“. ETSI ETSI TS 102 950-1 V1.6.1 (2017-08)6 i.4 ETSI ES 201 873-8: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 8: The IDL to TTCN-3 Mapping“. i.5 ETSI ES 201 873-9: “Meth
28、ods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 9: Using XML schema with TTCN-3“. i.6 ETSI ES 202 781: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Configuration and Deploymen
29、t Support“. i.7 ETSI ES 202 784: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Advanced Parameterization“. i.8 ETSI ES 202 785: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3;
30、TTCN-3 Language Extensions: Behaviour Types“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-1 3, ISO/IEC 9646-7 2, ETSI ES 201 873-1 1 (TTCN-3) and the following apply: Abstract Test Suite (ATS): test suite c
31、omposed of abstract test cases Implementation Conformance Statement (ICS): statement made by the supplier of an implementation claimed to conform to a given specification, stating which capabilities have been implemented ICS pro forma: document, in the form of a questionnaire, which when completed f
32、or an implementation or system becomes an ICS Implementation eXtra Information for Testing (IXIT): statement made by a supplier or implementor of an IUT which contains or references all of the information related to the IUT and its testing environment, which will enable the test laboratory to run an
33、 appropriate test suite against the IUT IXIT pro forma: document, in the form of a questionnaire, which when completed for the IUT becomes the IXIT Implementation Under Test (IUT): implementation of one or more OSI protocols in an adjacent user/provider relationship, being part of a real open system
34、 which is to be studied by testing 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ATS Abstract Test Suite ICS Implementation Conformance Statement IUT Implementation under Test IXIT Implementation eXtra Information for Testing SUT System Under Test TCI
35、 TTCN-3 Control Interface TP Test Purpose TRI TTCN-3 Runtime Interface TS Test System TSS Test Suite Structure TSS identification of the implementation; ICS pro forma tables (containing the global statement of conformance). A.1.3 Conventions The ICS pro forma is composed of information in tabular fo
36、rm in accordance with the guidelines presented in ISO/IEC 9646-7 2. Item column It contains a number that identifies the item in the table. Item description column It describes each respective item (e.g. parameters, timers, etc.). Reference column It gives reference to the TTCN-3 core language 1, ex
37、cept where explicitly stated otherwise. Status column The following notations, defined in ISO/IEC 9646-7 2, are used for the status column: m mandatory - the capability is required to be supported. n/a not applicable - in the given context, it is impossible to use the capability. No answer in the su
38、pport column is required. o optional - the capability may be supported or not. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a unique group of related optional items and the logic of their selection which is defined immediately f
39、ollowing the table. ETSI ETSI TS 102 950-1 V1.6.1 (2017-08)9 ci conditional - the requirement on the capability (“m“, “o“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying a unique conditional status expression that is defined immediately followin
40、g the table. For nested conditional expressions, the syntax “IF . THEN (IF . THEN . ELSE.) ELSE .“ shall be used to avoid ambiguities. If an ELSE clause is omitted, “ELSE n/a“ shall be implied. NOTE: Support of a capability means that the capability is implemented in conformance to the TTCN-3 core l
41、anguage 1. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 2, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A or n/a or “no a
42、nswer required“ (allowed only if the status is N/A, directly or after evaluation of a conditional status). Values allowed column This column contains the values or the ranges of values allowed. Values supported column The support column shall be filled in by the supplier of the implementation. In th
43、is column the values or the ranges of values supported by the implementation shall be indicated. References to items For each possible item answer (answer in the support column) within the ICS pro forma, a unique reference exists. It is defined as the table identifier, followed by a slash character
44、“/“, followed by the item number in the table. If there is more than one support column in a table, the columns shall be discriminated by letters (a, b, etc.) respectively. EXAMPLE: 5/4 is the reference to the answer of item 4 in Table 5. A.2 Identification of the implementation A.2.1 Date of the st
45、atement Identification of the Implementation under Test (IUT) and the system in which it resides - the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information
46、should both be filled in if they are different. A person who can answer queries regarding information supplied in the ICS should be named as the contact person. Date of the statement: A.2.2 Implementation under Test (IUT) identification IUT name: IUT version: ETSI ETSI TS 102 950-1 V1.6.1 (2017-08)1
47、0 A.2.3 System under Test (SUT) identification SUT name: Hardware configuration: Operating system: A.2.4 Product supplier Name: Address:Telephone number: Facsimile number: E-mail address: Additional information: A.2.5 Client Name: Address:Telephone number: Facsimile number: E-mail address: Additiona
48、l information: A.2.6 ICS contact person Name: Telephone number: Facsimile number: E-mail address: Additional information: A.3 ICS pro forma tables A.3.1 Global statement of conformance (Yes/No) Are all mandatory capabilities implemented? NOTE: Answering “No“ to this question indicates non-conformanc
49、e to the TTCN-3 core language. All test cases defined in ETSI TS 102 950-2 4 are mandatory. Non-supported mandatory capabilities are to be identified in the ICS, with an explanation of why the implementation is non-conforming. A.4 Additional information for ICS This clause contains all additional comments provided by the supplier of the implementation. ETSI ETSI TS 102 950-1 V1.6.1 (2017-08)11 History Document history V1.1.1 April 2011 Publication V1.2.1 April 2012 Publication V1.3.1 October 2013 Public
