1、 ETSI TS 103 096-1 V1.3.1 (2017-03) Intelligent Transport Systems (ITS); Testing; Conformance test specifications for ITS Security; Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATION ETSI ETSI TS 103 096-1 V1.3.1 (2017-03)2 Reference RTS/ITS-00534 Keywords ITS, PICS
2、, security ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be download
3、ed from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing o
4、r perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject t
5、o revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People
6、/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the wri
7、tten authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPP
8、TM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 096-1 V1.3.1 (2017-03)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Moda
9、l verbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Conformance 6g3Annex A (normative): Security PICS pro forma . 7g3A.1 Partial cancellation of copyright . 7g3A
10、.2 Guidance for completing the PICS pro forma 7g3A.2.1 Purposes and structure 7g3A.2.2 Abbreviations and conventions 7g3A.2.3 Instructions for completing the PICS pro forma. 8g3A.3 Identification of the Equipment 9g3A.3.1 Introduction 9g3A.3.2 Date of the statement 9g3A.3.3 Equipment Under Test iden
11、tification . 9g3A.3.4 Product supplier 9g3A.3.5 Client 10g3A.3.6 PICS contact person . 10g3A.4 Identification of the protocol 11g3A.5 Global statement of conformance . 11g3A.6 PICS pro forma tables 11g3History 12g3ETSI ETSI TS 103 096-1 V1.3.1 (2017-03)4 Intellectual Property Rights IPRs essential o
12、r potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Ess
13、ential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
14、 can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Trans
15、port Systems (ITS). The present document is part 1 of a multi-part deliverable covering Conformance test specifications for ITS Security, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test S
16、uite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting
17、 Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 096-1 V1.3.1 (2017-03)5 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma fo
18、r the test specifications for security algorithms as specified in ETSI TS 103 097 1 and in accordance with the relevant guidance given in ISO/IEC 9646-7 i.2 and ETSI ETS 300 406 i.3. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or editio
19、n number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected locat
20、ion might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 1
21、03 097 (V1.2.1): “Intelligent Transport Systems (ITS); Security; Security header and certificate formats“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited ve
22、rsion applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents a
23、re not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. i.2 ISO/IEC 9646-7:
24、“Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. i.3 ETSI ETS 300 406: “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization method
25、ology“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 103 097 1 and in ISO/IEC 9646-1 i.1 apply. ETSI ETSI TS 103 096-1 V1.3.1 (2017-03)6 3.2 Abbreviations For the purposes of the present document, the abbreviatio
26、ns given in ETSI TS 103 097 1 and the following apply: PDU Protocol Data Unit PICS Protocol Implementation Conformance Statement UT Upper Tester 4 Conformance A PICS pro forma which conforms to this PICS pro forma specification shall be technically equivalent to annex A, and shall preserve the numbe
27、ring and ordering of the items in annex A. A PICS which conforms to the present document shall: a) describe an implementation which claims to conform to ETSI TS 103 097 1; b) be a conforming PICS pro forma which has been completed in accordance with the instructions for completion given in clause A.
28、2; c) include the information necessary to uniquely identify both the supplier and the implementation. ETSI ETSI TS 103 096-1 V1.3.1 (2017-03)7 Annex A (normative): Security PICS pro forma A.1 Partial cancellation of copyright Notwithstanding the provisions of the copyright clause related to the tex
29、t of the present document, ETSI grants that users of the present document may freely reproduce the PICS pro forma in this annex so that it can be used for its intended purposes and may further publish the completed PICS pro forma. A.2 Guidance for completing the PICS pro forma A.2.1 Purposes and str
30、ucture The purpose of the present document is to provide a mechanism whereby a supplier of an implementation of the requirements defined in relevant specifications may provide information about the implementation in a standardized manner. The PICS pro forma is subdivided into clauses for the followi
31、ng categories of information: - instructions for completing the PICS pro forma; - identification of the implementation; - identification of the protocol; - PICS pro forma tables (for example: major capabilities, etc.). A.2.2 Abbreviations and conventions This annex does not reflect dynamic conforman
32、ce requirements but static ones. In particular, a condition for support of a PDU parameter does not reflect requirements about the syntax of the PDU (i.e. the presence of a parameter) but the capability of the implementation to support the parameter. In the sending direction, the support of a parame
33、ter means that the implementation is able to send this parameter (but it does not mean that the implementation always sends it). In the receiving direction, it means that the implementation supports the whole semantic of the parameter that is described in the main part of the present document. The P
34、ICS pro forma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 i.2. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in
35、free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Reference column The reference column gives reference to ETSI TS 103 097 1 except where explicitly stated otherwise. ETSI ETSI TS 103 096-1 V1.3.1 (2017-03)8 Status column The v
36、arious status used in this annex are in accordance with the rules in table A.1. Table A.1: Key to status codes Status code Status name Meaning M mandatory The capability shall be supported. It is a static view of the fact that the conformance requirements related to the capability in the reference s
37、pecification are mandatory requirements. This does not mean that a given behaviour shall always be observed (this would be a dynamic view), but that it shall be observed when the implementation is placed in conditions where the conformance requirements from the reference specification compel it to d
38、o so. For instance, if the support for a parameter in a sent PDU is mandatory, it does not mean that it shall always be present, but that it shall be present according to the description of the behaviour in the reference specification (dynamic conformance requirement). O optional The capability may
39、or may not be supported. It is an implementation choice. n/a not applicable It is impossible to use the capability. No answer in the support column is required. X prohibited (excluded) There is a requirement not to use this capability in the given context. c. conditional The requirement on the capab
40、ility (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “int“ is an integer identifying an unique conditional status expression which is defined immediately following the table. o. qualified optional For mutually exclusive or selectable options from a set. “int“
41、 is an integer which identifies an unique group of related optional items and the logic of their selection which is defined immediately following the table. I irrelevant (out-of-scope) Capability outside the scope of the reference specification. No answer is requested from the supplier. Mnemonic col
42、umn The Mnemonic column contains mnemonic identifiers for each item. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 i.2, are used for the support column: Y or y supported by the implementation N or
43、 n not supported by the implementation N/A, n/a or - no answer required (allowed only if the status is N/A, directly or after evaluation of a conditional status) References to items For each possible item answer (answer in the support column) within the PICS pro forma there exists a unique reference
44、, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the table. EXAMPLE: A.5/2 is the reference to the answer of item 2 in table A.5. A.2.3 Instructions for completing the PICS pro forma The su
45、pplier of the implementation may complete the PICS pro forma in each of the spaces provided. More detailed instructions are given at the beginning of the different clauses of the PICS pro forma. ETSI ETSI TS 103 096-1 V1.3.1 (2017-03)9 A.3 Identification of the Equipment A.3.1 Introduction Identific
46、ation of the Equipment shall be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information shall both be filled in if they are different. A person who can answer queries regarding information supp
47、lied in the PICS shall be named as the contact person. A.3.2 Date of the statement . A.3.3 Equipment Under Test identification Name: . . Hardware configuration: . . . Software configuration: . . . A.3.4 Product supplier Name: . Address: . . . Telephone number: . Facsimile number: . ETSI ETSI TS 103
48、096-1 V1.3.1 (2017-03)10 E-mail address: . Additional information: . . . A.3.5 Client Name: . Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . A.3.6 PICS contact person Name: . Telephone number: . Facsimile number: . E-mail address: . ETSI ETSI T
49、S 103 096-1 V1.3.1 (2017-03)11 Additional information: . . A.4 Identification of the protocol The present document applies to the following specifications: ETSI TS 103 097 1. A.5 Global statement of conformance Are all mandatory capabilities implemented? (Yes/No) . NOTE: Answering “No“ to this question indicates non-conformance to the ITS Security standard specification ETSI TS 103 097 1. Non-supported mandatory capabilities are to be identified in the PICS, with an explanation of why the implementation is non-conforming, on pages attache
