1、 ETSI TS 103 191-1 V1.2.1 (2017-03) Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Facilities layer protocols and communication requirements for infrastructure services; Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma TE
2、CHNICAL SPECIFICATION ETSI ETSI TS 103 191-1 V1.2.1 (2017-03)2 Reference RTS/ITS-00175 Keywords ITS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enr
3、egistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present d
4、ocument shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive w
5、ithin ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the pr
6、esent document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as author
7、ized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUG
8、TESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Associati
9、on. ETSI ETSI TS 103 191-1 V1.2.1 (2017-03)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Confo
10、rmance requirement concerning PICS 6g3Annex A (normative): MAPEM-SPATEM, IVIM and SREM-SSEM PICS pro forma 7g3A.1 Partial cancellation of copyright . 7g3A.2 Guidance for completing the PICS pro forma 7g3A.2.1 Purposes and structure 7g3A.2.2 Abbreviations and conventions 7g3A.2.3 Instructions for com
11、pleting the PICS pro forma. 9g3A.3 Identification of the implementation 9g3A.3.1 Introduction 9g3A.3.2 Date of the statement 9g3A.3.3 Implementation Under Test (IUT) identification . 10g3A.3.4 System Under Test (SUT) identification 10g3A.3.5 Product supplier 10g3A.3.6 Client (if different from produ
12、ct supplier) 11g3A.3.7 PICS contact person . 11g3A.4 Identification of the protocol 12g3A.5 Global statement of conformance . 12g3A.6 Tables . 12g3A.6.1 Generic . 12g3A.6.2 MAPEM/SPATEM 12g3A.6.3 IVIM . 12g3A.6.4 SREM/SSEM . 13g3History 14g3ETSI ETSI TS 103 191-1 V1.2.1 (2017-03)4 Intellectual Prope
13、rty Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Es
14、sential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carrie
15、d out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical
16、Committee Intelligent Transport Systems (ITS). The present document is part 1 of a multi-part deliverable covering Conformance test specification for Facilities layer protocols and communication requirements for infrastructure services, as identified below: Part 1: “Test requirements and Protocol Im
17、plementation Conformance Statement (PICS) pro forma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should no
18、t“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103
19、191-1 V1.2.1 (2017-03)5 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for Conformance test specification for MAPEM-SPATEM, IVIM and SREM-SSEM as defined in SAE J2735 1 and ETSI TS 103 301 2 in compliance with the relevant requirements and in
20、 accordance with the relevant guidance given in ISO/IEC 9646-7 i.2. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-speci
21、fic references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were vali
22、d at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 SAE J2735 (2015-03): “Dedicated Short Range Communications (DSRC) Message Set Dictionary“. 2 ETSI TS 103 301 (V1.1.1) (2016-11
23、): “Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set of Applications; Facilities layer protocols and communication requirements for infrastructure services“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or
24、version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cann
25、ot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ISO/IEC 9646-1 (1994): “Information technology - Open Systems Interconnection - Conformance t
26、esting methodology and framework - Part 1: General concepts“. i.2 ISO/IEC 9646-7 (1995): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. i.3 Void. ETSI ETSI TS 103 191-1 V1.2.1 (2017-03)6 3 Defin
27、itions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in SAE J2735 1, ISO/IEC 9646-1 i.1 and ISO/IEC 9646-7 i.2 apply. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ATS Abstract Test Suite D
28、SRC Dedicated Short Range Communications EU European Union ICS Implementation Conformance Statement ISO International Organization for Standardization ITS Intelligent Transport Systems IUT Implementation Under Test IVI Infrastructure to Vehicle Information IVIM IVI-message MAPEM MapData Messages PDU
29、 Protocol Data Unit PICS Protocol Implementation Conformance Statement RLT Road and Lane topology RSU Road Side Unit SAE Society of Automotive Engineers SPATEM Signal Phase And Timing Messages SREM Signal Request Message SSEM Signal Response Message SUT System Under Test TLC Traffic Light Control TL
30、M Traffic Light Manoeuvre TP Test Purpose TS Technical Specification TSS Test Suite Structure 4 Conformance requirement concerning PICS If it claims to conform to the present document, the actual PICS pro forma to be filled in by a supplier shall be technically equivalent to the text of the PICS pro
31、 forma given in annex A and shall preserve the numbering, naming and ordering of the pro forma items. An PICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance with the instructions for completion given in clause A.2. ETSI ETSI TS 103 191-1 V1.2.1 (2
32、017-03)7 Annex A (normative): MAPEM-SPATEM, IVIM and SREM-SSEM PICS pro forma A.1 Partial cancellation of copyright Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the MAPEM-SPATEM
33、, IVIM and SREM-SSEM PICS pro forma in this annex so that it can be used for its intended purposes and may further publish the completed MAPEM-SPATEM, IVIM and SREM-SSEM PICS. A.2 Guidance for completing the PICS pro forma A.2.1 Purposes and structure The purpose of this PICS pro forma is to provide
34、 a mechanism whereby a supplier of an implementation of the requirements defined in SAE J2735 1 may provide information about the implementation in a standardized manner. The PICS pro forma is subdivided into clauses for the following categories of information: guidance for completing the PICS pro f
35、orma; identification of the implementation; identification of the SAE J2735 1; global statement of conformance; PICS pro forma tables. A.2.2 Abbreviations and conventions The PICS pro forma contained in this annex is comprised of information in tabular form in accordance with the guidelines presente
36、d in ISO/IEC 9646-7 i.2. The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. ETSI ETSI TS
37、103 191-1 V1.2.1 (2017-03)8 Status column The following notations, defined in ISO/IEC 9646-7 i.2, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible
38、 to use the capability. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies an unique group of related optional items and the logic of th
39、eir selection which is defined immediately following the table. c.i conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying an unique conditional status expression which is defined immediate
40、ly following the table. i irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is requested from the supplier. NOTE 1: This use of “i“ status is not to be confused with the suffix “i“ to the “o“ and “c“ statuses above. Reference column The reference colu
41、mn makes reference to SAE J2735 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 i.2, are used for the support column: Y or y supported by the implementat
42、ion. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). NOTE 2: As stated in ISO/IEC 9646-7 i.2 support for a received PDU requires the ability to parse all valid parameters of that P
43、DU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Values allowed column The values allowed column contains the type, the list, the range, or the length of values allowe
44、d. The following notations are used: range of values: EXAMPLE 1: 5 20 list of values: , , ., EXAMPLE 2: 2 , 4, 6, 8, 9 EXAMPLE 3: 1101B, 1011B, 1111B EXAMPLE 4: 0AH, 34H, 2FH list of named values: (), (), ., () EXAMPLE 5: reject(1), accept(2) ETSI ETSI TS 103 191-1 V1.2.1 (2017-03)9 length: size ( )
45、 EXAMPLE 6: size (1 8) Values supported column The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated. References to items For each possible item answer (answer in the
46、 support column) within the PICS pro forma a unique reference exists, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the table. If there is more than one support column in a table, the colu
47、mns are discriminated by letters (a, b, etc.), respectively. EXAMPLE 7: A.5/4 is the reference to the answer of item 4 in table 5 of annex A. EXAMPLE 8: A.6/3b is the reference to the second answer (i.e. in the second support column) of item 3 in table 6 of annex A. Prerequisite line A prerequisite
48、line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. A.2.3 Instructions for completing the PICS pro forma The supplier of the implementation shall complete
49、the PICS pro forma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support or supported column boxes provided. If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately. More detailed instructions are given at the beginning of the different clauses of the PICS pro forma. A.3 Identification of the implementation A.3.1 Introduction Identification of the Implementation Under Test (IUT) and the system in which
