ETSI TS 103 235-2015 Reconfigurable Radio Systems (RRS) System architecture and high level procedures for operation of Licensed Shared Access (LSA) in the 2 300 MHz - 2 400 MHz ban_1.pdf

上传人:bowdiet140 文档编号:739928 上传时间:2019-01-11 格式:PDF 页数:28 大小:471.42KB
下载 相关 举报
ETSI TS 103 235-2015 Reconfigurable Radio Systems (RRS) System architecture and high level procedures for operation of Licensed Shared Access (LSA) in the 2 300 MHz - 2 400 MHz ban_1.pdf_第1页
第1页 / 共28页
ETSI TS 103 235-2015 Reconfigurable Radio Systems (RRS) System architecture and high level procedures for operation of Licensed Shared Access (LSA) in the 2 300 MHz - 2 400 MHz ban_1.pdf_第2页
第2页 / 共28页
ETSI TS 103 235-2015 Reconfigurable Radio Systems (RRS) System architecture and high level procedures for operation of Licensed Shared Access (LSA) in the 2 300 MHz - 2 400 MHz ban_1.pdf_第3页
第3页 / 共28页
ETSI TS 103 235-2015 Reconfigurable Radio Systems (RRS) System architecture and high level procedures for operation of Licensed Shared Access (LSA) in the 2 300 MHz - 2 400 MHz ban_1.pdf_第4页
第4页 / 共28页
ETSI TS 103 235-2015 Reconfigurable Radio Systems (RRS) System architecture and high level procedures for operation of Licensed Shared Access (LSA) in the 2 300 MHz - 2 400 MHz ban_1.pdf_第5页
第5页 / 共28页
点击查看更多>>
资源描述

1、 ETSI TS 103 235 V1.1.1 (2015-10) Reconfigurable Radio Systems (RRS); System architecture and high level procedures for operation of Licensed Shared Access (LSA) in the 2 300 MHz - 2 400 MHz band TECHNICAL SPECIFICATION ETSI ETSI TS 103 235 V1.1.1 (2015-10)2 Reference DTS/RRS-0141 Keywords architect

2、ure, BWA, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be dow

3、nloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any exist

4、ing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subj

5、ect to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/Comm

6、iteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written

7、authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM an

8、d LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 235 V1.1.1 (2015-10)3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs

9、 terminology 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 Architecture Model. 7g34.1 Architecture Reference Model . 7g34.2 Logical Elements 8g34.3 Reference Points . 8g34.4 H

10、igh Level Functions . 8g34.4.0 Introduction. 8g34.4.1 Information Entry Function 8g34.4.2 Information Processing Function 9g34.4.3 Information Mapping Function . 9g34.4.4 Reporting Function . 9g34.4.5 LSA Information Exchange Function . 9g34.4.6 System Support Functions Group . 9g34.4.7 System Manag

11、ement Functions Group . 9g34.5 Mapping of High Level Functions to Logical Elements. 10g35 LSA1Functional Description and Information Flows . 10g35.1 Introduction 10g35.2 Protocol Stacks . 10g35.3 LSA1Interface Management Functions . 10g35.4 LSA1Protocol Elements 11g35.4.1 Identities . 11g35.4.2 LSA

12、Spectrum Resource Availability Information . 11g35.5 High Level Procedures . 11g35.5.1 Introduction. 11g35.5.2 Registration Procedure 12g35.5.3 Deregistration Procedure 12g35.5.4 LSRAI Request Procedure 13g35.5.5 LSRAI Notification Procedure . 13g35.5.6 LSRAI Confirmation Procedure . 14g35.5.7 Conne

13、ctivity Check Notification Procedure . 14g35.5.8 Connectivity Check Request Procedure 15g35.6 Procedure Flows . 15g35.6.1 Introduction. 15g35.6.2 LC Operation Start-up 15g35.6.3 LR Notification of new LSRAI. 16g35.6.4 LSRAI Synchronization 17g35.6.5 LC Request for new LSRAI with optional LR Notifica

14、tion . 17g36 LSA Failure Management 18g37 LSA Deployment Scenario Rules . 19g3Annex A (informative): LSA Operational Use Cases 20g3A.0 Introduction 20g3ETSI ETSI TS 103 235 V1.1.1 (2015-10)4 A.1 Input of the Sharing Framework, Sharing Arrangement and LSA License information to the LSA Repository 20g

15、3A.2 Input of Incumbents usage and protection requirements . 20g3A.3 LSA Licensee activates LSA support operation . 21g3A.4 LSA Licensee starts to operate in the available LSA spectrum resources . 21g3A.5 Updates of the incumbents usage and protection requirements . 22g3Annex B (informative): Guidan

16、ce for LSA2and LSA323g3B.0 Introduction 23g3B.1 NRA-Related Guidance (LSA2) 23g3B.2 Incumbent-related Guidance (LSA3) . 23g3Annex C (informative): Deployment Architecture Examples 25g3C.1 Introduction 25g3C.2 Examples 25g3C.2.1 LR and single LC . 25g3C.2.2 LR and multiple LCs 25g3C.2.3 LR and “proxy

17、 LC“ 26g3Annex D (informative): Example for possible LC fall-back measures if LSRAI consistency cannot be guaranteed on both ends of LSA1. 27g3History 28g3ETSI ETSI TS 103 235 V1.1.1 (2015-10)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been

18、 declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“,

19、which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced

20、in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Reconfigurable Radio Systems (RRS). Modal verbs terminology In the present docum

21、ent “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except w

22、hen used in direct citation. ETSI ETSI TS 103 235 V1.1.1 (2015-10)6 1 Scope The present document specifies the system architecture for operation of mobile broadband service in the 2 300 MHz - 2 400 MHz band under Licensed Shared Access (LSA) i.2 and i.3, aimed at enabling access for mobile/fixed com

23、munication networks (MFCNs) in those CEPT countries where access to the band is foreseen but cannot be provided without restrictions due to Incumbent usage, as documented in ETSI TR 103 113 i.1. Application to other bands is not precluded and depends on future regulatory decisions. The documented sy

24、stem architecture includes definition of the logical elements, reference points and functions supported by the architecture, and the definition of the procedures and procedure flows. The present document has been developed following, and in accordance with, the System Requirements for LSA as documen

25、ted in ETSI TS 103 154 1. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

26、reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot g

27、uarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 103 154: “Reconfigurable Radio Systems (RRS); System requirements for operation of Mobile Broadband Systems in the 2 300 MHz - 2 400 MHz band under Licensed Shar

28、ed Access (LSA)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document

29、(including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with

30、 regard to a particular subject area. i.1 ETSI TR 103 113 (V1.1.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); System Reference document (SRdoc); Mobile broadband services in the 2 300 MHz - 2 400 MHz frequency band under Licensed Shared Access regime“. i.2 ECC Report 205: “Lic

31、ensed Shared Access (LSA)“, February 2014. i.3 RSPG Opinion on Licensed Shared Access, RSPG13-538, November 2013. i.4 IETF RFC 791: “Internet Protocol (IP)“, September 1981. i.5 ECC Recommendation (15)04: “Guidance for the implementation of a sharing framework between MFCN and PMSE within 2300-2400

32、MHz“, July 2015. i.6 CEPT Report 58: “Technical sharing solutions for the shared use of the 2300-2400 MHz band for WBB and PMSE“, July 2015. ETSI ETSI TS 103 235 V1.1.1 (2015-10)7 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and defini

33、tions apply: LSA licensee: entity operating a MFCN, which holds individual rights of use to an LSA spectrum resource LSA spectrum resource: spectrum resource which is to be shared between an Incumbent and a LSA Licensee on a static or dynamic basis according to the Sharing Framework defined by the A

34、dministration/NRA LSA spectrum resource availability information: information provided to a Licensee, which conveys the LSA spectrum resource that may be used by the Licensee, and the respective operational conditions sharing arrangement: set of practical details for sharing an LSA spectrum resource

35、 sharing framework: set of sharing rules or sharing conditions that will materialize the change, if any, in the spectrum rights of the Incumbent(s) and define the spectrum, with corresponding technical and operational conditions, that can be made available for alternative usage under LSA spectrum re

36、source: resource or set of resources defined in time, space and frequency domains 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: 3GPP 3rdGeneration Partnership Project DTLS Datagram Transport Layer Security ECC Electronic Communications Committee of th

37、e CEPT IP Internet Protocol IPsec Internet Protocol security ITU International Telecommunications Union LC LSA Controller LR LSA RepositoryLSA Licensed Shared Access LSRAI LSA Spectrum Resource Availability Information LTE Long Term Evolution MFCN Mobile/Fixed Communications Network NRA National Reg

38、ulatory Authority OAM Operation, Administration and Maintenance RSPG Radio Spectrum Policy Group TCP Transmission Control ProtocolTLS Transport Layer Security UDP User Datagram Protocol 4 Architecture Model 4.1 Architecture Reference Model The LSA Architecture reference model is shown in figure 4.1.

39、 Reference points shown in dashed format indicate that the respective interfaces and corresponding interface functions will not be defined in the present document, although some guidance is provided (see annex B). ETSI ETSI TS 103 235 V1.1.1 (2015-10)8 Figure 4.1: LSA Architecture Reference Model 4.

40、2 Logical Elements LSA Repository (LR): The LR supports the entry and storage of information describing Incumbents usage and protection requirements 1. It is able to convey the related availability information to authorized LSA Controllers, and is also able to receive and store acknowledgement infor

41、mation received from the LSA Controllers. The LR also provides means for the NRA to monitor the operation of the LSA System 1, and to provide the LSA System with information on the Sharing Framework and the LSA Licensees. The LR ensures that the LSA system operates in conformance with the Sharing Fr

42、amework i.2 and the licensing regime, and may in addition realize any non-regulatory details of the Sharing Arrangement 1. LSA Controller (LC): The LC is located within the LSA Licensees domain, and enables the LSA Licensee 1 to obtain LSA spectrum resource availability information from the LR, and

43、to provide acknowledgment information to the LR. The LC interacts with the Licensees MFCN in order to support the mapping of availability information into appropriate radio transmitter configurations, and receive the respective confirmations from the MFCN. 4.3 Reference Points LSA1: Reference point

44、between LR and LC. LSA2: Reference point for Administration/NRA interaction with the LR. Some of the functionality associated with this reference point is described in annex B. LSA3: Reference point for Incumbent interaction with the LR. Some of the functionality associated with this reference point

45、 is described in annex B. 4.4 High Level Functions 4.4.0 Introduction This clause lists and describes the high level functions performed by the LSA System. The high level functions cover the aspects of LSA System operation in line with requirements of ETSI TS 103 154 1. 4.4.1 Information Entry Funct

46、ion Allows the entry and storage of information that is needed for the operation of the LSA System, including the following: Sharing Framework information (set of sharing rules or sharing conditions for the band, information on spectrum that can be made available for shared use and the corresponding

47、 technical and operational conditions for its use, identification of incumbents). ETSI ETSI TS 103 235 V1.1.1 (2015-10)9 LSA License information (Licensee identity and related information). Sharing Arrangement information for each Incumbent and Licensee (set of practical details for sharing an LSA s

48、pectrum resource, whereby LSA spectrum resource may be used by Incumbent or LSA Licensee). Incumbents LSA spectrum resource usage and protection requirements. The function also supports the verification of inputs (consistency with Sharing Framework/Arrangement). 4.4.2 Information Processing Function

49、 This function supports the derivation of LSA spectrum resource availability information for each Licensee, to be provided to the Information Exchange function for forwarding to the respective Information Mapping function of the LSA Licensee. The LSA spectrum resource availability information is derived based on the data collected by the Information Entry Function. The function further supports the processing of Licensee acknowledgment information. The above functionality also includes support for multiple Incumbents and multipl

展开阅读全文
相关资源
猜你喜欢
  • ASTM G57-2006 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method《用温纳四电极法现场测量泥土电阻率的标准试验方法》.pdf ASTM G57-2006 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method《用温纳四电极法现场测量泥土电阻率的标准试验方法》.pdf
  • ASTM G57-2006(2012) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method《使用Wenner4电极法现场测量土壤电阻率的标准试验方法》.pdf ASTM G57-2006(2012) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method《使用Wenner4电极法现场测量土壤电阻率的标准试验方法》.pdf
  • ASTM G58-1985(2005) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments《焊件的应力腐蚀试样的制备》.pdf ASTM G58-1985(2005) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments《焊件的应力腐蚀试样的制备》.pdf
  • ASTM G58-1985(2011) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments《焊件的应力腐蚀试样的制备标准操作规程》.pdf ASTM G58-1985(2011) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments《焊件的应力腐蚀试样的制备标准操作规程》.pdf
  • ASTM G58-1985(2015) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments《制备焊件用应力腐蚀试样的标准实施规程》.pdf ASTM G58-1985(2015) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments《制备焊件用应力腐蚀试样的标准实施规程》.pdf
  • ASTM G59-1997(2003) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements《动电势极化电阻测量的标准试验方法》.pdf ASTM G59-1997(2003) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements《动电势极化电阻测量的标准试验方法》.pdf
  • ASTM G59-1997(2009) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements《动电势极化电阻测量的标准试验方法》.pdf ASTM G59-1997(2009) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements《动电势极化电阻测量的标准试验方法》.pdf
  • ASTM G59-1997(2014) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements《实施动电势极化电阻测量的标准试验方法》.pdf ASTM G59-1997(2014) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements《实施动电势极化电阻测量的标准试验方法》.pdf
  • ASTM G6-2007 Standard Test Method for Abrasion Resistance of Pipeline Coatings《管道涂层抗磨性标准试验方法》.pdf ASTM G6-2007 Standard Test Method for Abrasion Resistance of Pipeline Coatings《管道涂层抗磨性标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1