1、 ETSI TS 103 239-2 V1.1.1 (2014-12) Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for MAP-E technology; Part 2: Test Suite Structure and Test Purposes (TSS Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standard
2、s“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referen
3、ced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Integrated broadband cable telecommunication networks (CABLE). This present
4、document produced for the transition technologies accommodates an urgent need in the industry to define requirements that enable seemless transition of Cable Networks to IPv6. Considering the depletion of IPv4 addresses, transition to IPv6 is required in order to enable continued growth of the custo
5、mer base connected to Cable Networks and ensure service continuity for existing and new customers. High-quality connectivity to all kinds of IP-based services and networks is essential in todayls business and private life. A plethora of transition technologies have been proposed in IETF, other stand
6、ardization organizations and by manufacturers of IP technology to allow coexistence of IPv4 and IPv6 hosts, access and core networks as well as services. Each of these technology options is specified, implemented and deployed in various forms and stages. The present document is based on the requirem
7、ents of ETSI TS 101 569-1 1. The present document is part 2 of a multi-part deliverable covering the conformance test specification for MAP-E technology, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS) proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS
8、 Part 3: “Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “may not“, “need“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as
9、described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 239-2 V1.1.1 (2014-12)51 Scope The present document provides the Test Suite Structure a
10、nd Test Purposes (TSS Cable Network Transition to IPv6 Part 1: IPv6 Transition Requirements“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ISO/IEC 964
11、6-1 (1994): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework- - Part 1: General concepts“. i.2 ISO/IEC 9646-2 (1994): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test S
12、uite specification“. i.3 ETSI ETS 300 406 (1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 3 Abbreviations For the purposes of the present document, the following abbreviations apply: ATS Abstract Test Suite
13、B4 (MAP-E) Basic Bridging BroadBand element CPE Customer Premises Equipment DF bit Dont Fragment flag (in IPv4 header) DHCP Dynamic Host Configuration Protocol DMR Default Mapping Rule DNS Domain Name System GW GateWay HTML HyperText Markup Language ETSI ETSI TS 103 239-2 V1.1.1 (2014-12)6ICMP Inter
14、net Control Message Protocol IP Internet Protocol IPv4 IP version 4 IPv6 IP version 6 IUT Implementation Under Test LAN Local Area Network MAP Mapping of Address and Port MAP-E Mapping of Address and Port Encapsulation mode MSS Maximum Segment Size MTS Methods for Testing and Specification MTU Maxim
15、um Transmission Unit NAT Network Address Translation/Network Address Translator PD Prefix DelegationPICS Procotol Implementation Conformance Statement RA Router Advertisement TC Test CaseTCP Transmission Control Protocol TP Test Purpose 4 Test Suite Structure The identifier of the TP is built accord
16、ing to table 1 as recommended in the MTS methodologies. Table 1: TP naming convention for MAP-E TP/ = root MAP-E Mapping of Address and Port Encapsulation Mode = group BR Border Relay CPE Customer Premise Equipment = sub-group GWA GatewayAssignment BF Basic Function AS Address Structure SC Session C
17、ontrol AA Anycast Addressing MSSC Maximum Segment Size Clamping FRAG Packet Fragmentation = type of testing BV Valid Behaviour tests = sequential number 01 to 99 NOTE 1: A sub-group may not apply for all groups. 5 Test Purposes (TP) This clause proposes a TP proforma which is used in the present doc
18、ument. The fields of this proforma as used in the present document are explained in table 2. ETSI ETSI TS 103 239-2 V1.1.1 (2014-12)7Table 2: TP proforma field description TP Header TP ID The TP ID is a unique identifier according to the TP naming conventions in tables * Test objective Short descrip
19、tion of test purpose objective according to the requirements from the base standard. Reference The reference indicates the clauses of the reference standard specifications in which the conformance requirement is expressed. TP Behaviour Initial conditions (optional) The initial conditions define in w
20、hich initial state the IUT has to be to apply the actual TP. In the corresponding “Test Case“ (TC), when the execution of the initial condition does not succeed, it leads to the assignment of an Inconclusive verdict. Expected behaviour (TP body) Definition of the events, which are parts of the TP ob
21、jective, and the IUT are expected to perform in order to conform to the base specification. In the corresponding TC,“ Pass“ or “Fail“ verdicts can be assigned there. 5.1 TPs for BR 5.1.1 Basic Function TP Id TP/MAP-E/BR/BF/BV/01 Test objective Check that the IUT supports the functionality of MAP-E b
22、ase NAT mapping Reference 1: clause 6.7.10.7 Feature: Packet Encapsulation Initial conditions with the IUT being properly provisioned and the interfaces are connected Cable Network Handbook“. ETSI ES 201 488 (all parts) (V1.2.2): “Access and Terminals (AT); Data Over Cable Systems“. ETSI ES 202 488
23、(all parts) (V1.1.1): “Access and Terminals (AT); Second Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems“. Draft-ietf-softwire-map-12: “Mapping of Address and Port with Encapsulation (MAP)“. ETSI ETSI TS 103 239-2 V1.1.1 (2014-12)16History Document history V1.1.1 December 2014 Publication
