ETSI TS 103 412-2016 Mobile Standards Group (MSG) Pan-European eCall end to end and in-band modem conformance testing Prose test specification (V1 1 1)《移动标准组(MSG) 泛欧eCall端到端和带内调制解调.pdf

上传人:jobexamine331 文档编号:740099 上传时间:2019-01-11 格式:PDF 页数:84 大小:776.53KB
下载 相关 举报
ETSI TS 103 412-2016 Mobile Standards Group (MSG) Pan-European eCall end to end and in-band modem conformance testing Prose test specification (V1 1 1)《移动标准组(MSG) 泛欧eCall端到端和带内调制解调.pdf_第1页
第1页 / 共84页
ETSI TS 103 412-2016 Mobile Standards Group (MSG) Pan-European eCall end to end and in-band modem conformance testing Prose test specification (V1 1 1)《移动标准组(MSG) 泛欧eCall端到端和带内调制解调.pdf_第2页
第2页 / 共84页
ETSI TS 103 412-2016 Mobile Standards Group (MSG) Pan-European eCall end to end and in-band modem conformance testing Prose test specification (V1 1 1)《移动标准组(MSG) 泛欧eCall端到端和带内调制解调.pdf_第3页
第3页 / 共84页
ETSI TS 103 412-2016 Mobile Standards Group (MSG) Pan-European eCall end to end and in-band modem conformance testing Prose test specification (V1 1 1)《移动标准组(MSG) 泛欧eCall端到端和带内调制解调.pdf_第4页
第4页 / 共84页
ETSI TS 103 412-2016 Mobile Standards Group (MSG) Pan-European eCall end to end and in-band modem conformance testing Prose test specification (V1 1 1)《移动标准组(MSG) 泛欧eCall端到端和带内调制解调.pdf_第5页
第5页 / 共84页
点击查看更多>>
资源描述

1、 ETSI TS 103 412 V1.1.1 (2016-04) Mobile Standards Group (MSG); Pan-European eCall end to end and in-band modem conformance testing; Prose test specification TECHNICAL SPECIFICATION ETSI ETSI TS 103 412 V1.1.1 (2016-04)2 Reference DTS/MSG-0022 Keywords eCall, GSM, UMTS ETSI 650 Route des Lucioles F-

2、06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-sea

3、rch The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents betwee

4、n such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Informati

5、on on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification N

6、o part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the f

7、oregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for t

8、he benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 412 V1.1.1 (2016-04)3 Contents Intellectual Property Rights 9g3Foreword . 9g3Modal verbs terminology 9g31 Scope 10g32 References 10g32

9、.1 Normative references . 10g32.2 Informative references 11g33 Abbreviations . 12g34 Glossary 13g34.1 Intention of the glossary . 13g34.2 General . 13g34.3 States 13g34.4 Decisions 14g34.5 Procedures 14g34.6 Tester input / output, internal tester actions / trigger 15g35 Overview 16g35.1 Test definit

10、ion methodology. 16g35.1.1 Derivation of Test Case Descriptions from CEN EN 16454 16g35.1.2 Structure of Test Case Descriptions 16g35.1.3 Test Purposes 17g35.1.4 Pre-Test Conditions 17g35.1.5 Test Sequence . 17g35.1.6 Final conditions 17g35.2 Abstract Test Architecture 17g35.2.0 Preface 17g35.2.1 Ov

11、erview 17g35.2.1.1 IVS Testing . 17g35.2.1.1.1 Test Model IVS . 17g35.2.1.1.2 Interface descriptions . 18g35.2.1.2 PSAP Testing 18g35.2.2 Interface Specifications . 18g35.2.2.1 IVS Testing . 18g35.2.2.1.0 Preface . 18g35.2.2.1.1 IVS and Upper Tester 19g35.2.2.1.2 IVS and MNO . 19g35.2.2.1.3 IVS and

12、GNSS Simulator 20g35.2.2.2 MNO Testing 20g35.2.2.3 PSAP Testing 20g35.2.2.4 TPS-eCall Testing . 20g35.2.3 State diagram 20g35.3 Specification in TTCN . 23g35.4 Capabilities . 23g35.5 Test Case Selection 24g35.6 Test Configuration Parameters . 24g35.6.1 eCall Type Suffix 24g35.7 TTCN Implementation .

13、 24g35.8 Execution Guidelines . 24g36 Generic Procedures. 24g36.0 Preface 24g36.1 General . 25g36.1.1 General assumptions . 25g36.1.2 Generic procedures . 25g36.1.2.0 Preface . 25g36.1.2.1 Procedure for network registration 26g3ETSI ETSI TS 103 412 V1.1.1 (2016-04)4 6.1.2.2 Procedure for eCall estab

14、lishment . 26g36.1.2.3 Procedure for eCall in progress . 29g36.1.2.4 Procedure for eCall release (PSAP initiated) 29g36.1.2.5 Procedure for eCall release (IVS initiated, preceding AL-ACK call clear down). 29g36.1.2.6 Procedure for PSAP callback 29g36.2 Preambles . 30g36.3 Postambles 33g36.3.0 Prefac

15、e 33g36.3.1 Postambles for eCall capable devices . 34g36.3.2 Postambles for eCall only devices 34g36.3.3 Special case: Limited Service Condition 34g37 Test Cases . 34g37.1 In-vehicle equipment and system (IVS) . 34g37.1.1 Conformance tests for in-vehicle user equipment for Pan European eCall . 34g37

16、.1.1.1 CTP 1.1.0.1 Conformance to ETSI TS 102 936-1 and ETSI TS 102 936-2 - PE eCall IVS 34g37.1.1.2a CTP 1.1.0.2 Test for conformance to valid SIM/USIM - PE eCall capable IVS 35g37.1.1.2a.1 Test Purpose (TP) 35g37.1.1.2a.2 Test applicability . 35g37.1.1.2a.3 Conformance requirements 35g37.1.1.2a.4

17、Test description . 35g37.1.1.2b CTP 1.1.0.2 Test for conformance to valid SIM/USIM - PE eCall only IVS . 35g37.1.1.2b.1 Test Purpose (TP) 35g37.1.1.2b.2 Test applicability . 35g37.1.1.2b.3 Conformance requirements 35g37.1.1.2b.4 Test description . 36g37.1.1.3 CTP 1.1.0.3 Automatic eCall triggering d

18、oes not occur when ignition OFF - PE eCall IVS 36g37.1.1.3.1 Test Purpose (TP) 36g37.1.1.3.2 Test applicability . 36g37.1.1.3.3 Conformance requirements 36g37.1.1.3.4 Test description . 36g37.1.1.4 CTP 1.1.1.1 Power on and self test - PE eCall IVS . 37g37.1.1.4.1 Test Purpose (TP) 37g37.1.1.4.2 Test

19、 applicability . 37g37.1.1.4.3 Conformance requirements 37g37.1.1.4.4 Test description . 37g37.1.1.5 CTP 1.1.2.1 eCall automatically activated - PE eCall IVS . 37g37.1.1.5.1 Test Purpose (TP) 37g37.1.1.5.2 Test applicability . 38g37.1.1.5.3 Conformance requirements 38g37.1.1.5.4 Test description . 3

20、8g37.1.1.6 CTP 1.1.2.2 Automatically triggered eCall in progress was not disconnected upon a new eCall trigger - PE eCall IVS . 38g37.1.1.6.1 Test Purpose (TP) 38g37.1.1.6.2 Test applicability . 38g37.1.1.6.3 Conformance requirements 38g37.1.1.6.4 Test description . 39g37.1.1.7 CTP 1.1.2.3 Post-side

21、-crash performance of automatic trigger - IVS . 39g37.1.1.7.1 Test Purpose (TP) 39g37.1.1.7.2 Test applicability . 39g37.1.1.7.3 Conformance requirements 39g37.1.1.7.4 Test description . 39g37.1.1.8 CTP 1.1.2.4 Post-frontal-crash performance of automatic trigger - IVS . 40g37.1.1.9 CTP 1.1.2.5 Perfo

22、rmance of automatic trigger - different crash types - IVS 40g37.1.1.9.1 Test Purpose (TP) 40g37.1.1.9.2 Test applicability . 40g37.1.1.9.3 Conformance requirements 40g37.1.1.9.4 Test description . 40g37.1.1.10 CTP 1.1.3.1 eCall manually activated - PE eCall IVS 41g37.1.1.10.1 Test Purpose (TP) 41g37

23、.1.1.10.2 Test applicability . 41g37.1.1.10.3 Conformance requirements 41g3ETSI ETSI TS 103 412 V1.1.1 (2016-04)5 7.1.1.10.4 Test description . 41g37.1.1.11 CTP 1.1.3.2 Manually triggered eCall in progress was not disconnected upon a new eCall trigger - PE eCall IVS . 42g37.1.1.11.1 Test Purpose (TP

24、) 42g37.1.1.11.2 Test applicability . 42g37.1.1.11.3 Conformance requirements 42g37.1.1.11.4 Test description . 42g37.1.1.12 CTP 1.1.4.1 Test eCall activated - PE eCall IVS 43g37.1.1.12.1 Test Purpose (TP) 43g37.1.1.12.2 Test applicability . 43g37.1.1.12.3 Conformance requirements 43g37.1.1.12.4 Tes

25、t description . 43g37.1.1.13 CTP 1.1.5.1 Network registration - PE eCall IVS . 43g37.1.1.13.1 Test Purpose (TP) 43g37.1.1.13.2 Test applicability . 44g37.1.1.13.3 Conformance requirements 44g37.1.1.13.4 Test description . 44g37.1.1.14 CTP 1.1.5.2 Manual termination of eCall by vehicle occupants not

26、allowed (automatically triggered eCall) - PE eCall IVS . 44g37.1.1.14.1 Test Purpose (TP) 44g37.1.1.14.2 Test applicability . 44g37.1.1.14.3 Conformance requirements 44g37.1.1.14.4 Test description . 45g37.1.1.15 CTP 1.1.5.3 Manual termination of eCall by vehicle occupants not allowed (manually trig

27、gered eCall) - PE eCall IVS 45g37.1.1.15.1 Test Purpose (TP) 45g37.1.1.15.2 Test applicability . 45g37.1.1.15.3 Conformance requirements 45g37.1.1.15.4 Test description . 45g37.1.1.16 CTP 1.1.5.4 Automatically triggered eCall in progress was not disconnected when ignition is switched to OFF - PE eCa

28、ll IVS . 46g37.1.1.16.1 Test Purpose (TP) 46g37.1.1.16.2 Test applicability . 46g37.1.1.16.3 Conformance requirements 46g37.1.1.16.4 Test description . 46g37.1.1.17 CTP 1.1.5.5 Manually triggered eCall in progress was not disconnected when ignition is switched to OFF - PE eCall IVS . 46g37.1.1.17.1

29、Test Purpose (TP) 46g37.1.1.17.2 Test applicability . 46g37.1.1.17.3 Conformance requirements 47g37.1.1.17.4 Test description . 47g37.1.1.18 CTP 1.1.5.6 Priority over conflicting communication - PE eCall IVS 47g37.1.1.18.1 Test Purpose (TP) 47g37.1.1.18.2 Test applicability . 48g37.1.1.18.3 Conforma

30、nce requirements 48g37.1.1.18.4 Test description . 48g37.1.1.19 CTP 1.1.5.7 Network registration is re-tried when network registration attempt was not successful - PE eCall IVS . 48g37.1.1.20a CTP 1.1.6.1 Mute IVS and vehicle audio - PE eCall capable IVS 49g37.1.1.20a.1 Test Purpose (TP) 49g37.1.1.2

31、0a.2 Test applicability . 49g37.1.1.20a.3 Conformance requirements 49g37.1.1.20a.4 Test description . 49g37.1.1.20b CTP 1.1.6.1 Mute IVS and vehicle audio - PE eCall only IVS . 50g37.1.1.20b.1 Test Purpose (TP) 50g37.1.1.20b.2 Test applicability . 51g37.1.1.20b.3 Conformance requirements 51g37.1.1.2

32、0b.4 Test description . 51g37.1.1.21 CTP 1.1.7.1 Set-up TS12 call with eCall identifier (flag) set to “automatic“ - PE eCall IVS . 52g37.1.1.21.1 Test Purpose (TP) 52g37.1.1.21.2 Test applicability . 52g37.1.1.21.3 Conformance requirements 52g3ETSI ETSI TS 103 412 V1.1.1 (2016-04)6 7.1.1.21.4 Test d

33、escription . 52g37.1.1.22 CTP 1.1.8.1 Set-up TS12 call with eCall identifier (flag) set to “manual“ - PE eCall IVS . 52g37.1.1.22.1 Test Purpose (TP) 52g37.1.1.22.2 Test applicability . 52g37.1.1.22.3 Conformance requirements 53g37.1.1.22.4 Test description . 53g37.1.1.23 CTP 1.1.9.1 Set-up TS11 cal

34、l to test number - PE eCall IVS . 53g37.1.1.23.1 Test Purpose (TP) 53g37.1.1.23.2 Test applicability . 53g37.1.1.23.3 Conformance requirements 53g37.1.1.23.4 Test description . 53g37.1.1.24a CTP 1.1.10.1 eCall is attempted when no networks are available (limited service condition with forbidden PLMN

35、 on SIM/USIM) - PE eCall IVS . 54g37.1.1.24a.1 Test Purpose (TP) 54g37.1.1.24a.2 Test applicability . 54g37.1.1.24a.3 Conformance requirements 54g37.1.1.24a.4 Test description . 54g37.1.1.24b CTP 1.1.10.1 eCall is attempted when no networks are available (limited service condition, location update r

36、ejected by network) - PE eCall IVS 55g37.1.1.24b.1 Test Purpose (TP) 55g37.1.1.24b.2 Test applicability . 55g37.1.1.24b.3 Conformance requirements 55g37.1.1.24b.4 Test description . 55g37.1.1.25 CTP 1.1.10.2 Re-dial attempt completed within 2 minutes after eCall is dropped - PE eCall IVS . 56g37.1.1

37、.25.1 Test Purpose (TP) 56g37.1.1.25.2 Test applicability . 56g37.1.1.25.3 Conformance requirements 56g37.1.1.25.4 Test description . 57g37.1.1.26 CTP 1.1.10.3 Duration of eCall Initiation signal - PE eCall IVS 57g37.1.1.26.1 Test Purpose (TP) 57g37.1.1.26.2 Test applicability . 57g37.1.1.26.3 Confo

38、rmance requirements 57g37.1.1.26.4 Test description . 57g37.1.1.27 CTP 1.1.11.1 Send MSD with indicator set to “Automatically Initiated eCall“ (AleC) - PE eCall IVS 58g37.1.1.27.1 Test Purpose (TP) 58g37.1.1.27.2 Test applicability . 58g37.1.1.27.3 Conformance requirements 58g37.1.1.27.4 Test descri

39、ption . 58g37.1.1.28 CTP 1.1.12.1 Send MSD with indicator set to “Manually Initiated eCall“ (MIeC) - PE eCall IVS 59g37.1.1.28.1 Test Purpose (TP) 59g37.1.1.28.2 Test applicability . 59g37.1.1.28.3 Conformance requirements 59g37.1.1.28.4 Test description . 59g37.1.1.29 CTP 1.1.13.1 Send MSD with ind

40、icator set to “Test eCall“ - PE eCall IVS . 59g37.1.1.29.1 Test Purpose (TP) 59g37.1.1.29.2 Test applicability . 59g37.1.1.29.3 Conformance requirements 60g37.1.1.29.4 Test description . 60g37.1.1.30 CTP 1.1.14.1 Verify MSD transfer - PE eCall IVS . 60g37.1.1.30.1 Test Purpose (TP) 60g37.1.1.30.2 Te

41、st applicability . 61g37.1.1.30.3 Conformance requirements 61g37.1.1.30.4 Test description . 61g37.1.1.31 CTP 1.1.14.2 Un-mute IVS audio when AL-ACK received - PE eCall IVS 62g37.1.1.31.1 Test Purpose (TP) 62g37.1.1.31.2 Test applicability . 62g37.1.1.31.3 Conformance requirements 62g37.1.1.31.4 Tes

42、t description . 62g37.1.1.32 CTP 1.1.15.1 Establish voice link to PSAP - PE eCall IVS 62g37.1.1.32.1 Test Purpose (TP) 62g37.1.1.32.2 Test applicability . 63g3ETSI ETSI TS 103 412 V1.1.1 (2016-04)7 7.1.1.32.3 Conformance requirements 63g37.1.1.32.4 Test description . 63g37.1.1.33 CTP 1.1.15.2 MSD tr

43、ansfer request while eCall conversation in progress - PE eCall IVS 63g37.1.1.33.1 Test Purpose (TP) 63g37.1.1.33.2 Test applicability . 64g37.1.1.33.3 Conformance requirements 64g37.1.1.33.4 Test description . 64g37.1.1.34 CTP 1.1.15.3 eCall continuation when SEND MSD request not received (T5 expire

44、d) - PE eCall IVS 65g37.1.1.34.1 Test Purpose (TP) 65g37.1.1.34.2 Test applicability . 65g37.1.1.34.3 Conformance requirements 65g37.1.1.34.4 Test description . 65g37.1.1.35 CTP 1.1.15.4 Call continuation when AL-ACK not received (T6 expired) - PE eCall IVS . 66g37.1.1.35.1 Test Purpose (TP) 66g37.1

45、.1.35.2 Test applicability . 66g37.1.1.35.3 Conformance requirements 66g37.1.1.35.4 Test description . 66g37.1.1.36 CTP 1.1.15.5 MSD is transferred continuously until T7 expires and IVS reconnects loudspeaker and microphone on its expiry - PE eCall IVS . 67g37.1.1.36.1 Test Purpose (TP) 67g37.1.1.36

46、.2 Test applicability . 67g37.1.1.36.3 Conformance requirements 67g37.1.1.36.4 Test description . 67g37.1.1.37 CTP 1.1.16.1 Clear down call automatically - PE eCall IVS 68g37.1.1.37.1 Test Purpose (TP) 68g37.1.1.37.2 Test applicability . 68g37.1.1.37.3 Conformance requirements 68g37.1.1.37.4 Test de

47、scription . 68g37.1.1.38 CTP 1.1.16.2 IVS clears down the eCall upon T2 expiry - PE eCall IVS 69g37.1.1.38.1 Test Purpose (TP) 69g37.1.1.38.2 Test applicability . 69g37.1.1.38.3 Conformance requirements 69g37.1.1.38.4 Test description . 70g37.1.1.39 CTP 1.1.16.3 IVS registers recent eCalls - PE eCal

48、l IVS . 70g37.1.1.39.1 Test Purpose (TP) 70g37.1.1.39.2 Test applicability . 70g37.1.1.39.3 Conformance requirements 71g37.1.1.39.4 Test description . 71g37.1.1.40 CTP 1.1.17.1 Call-back allowed and able to be answered by IVS - PE eCall IVS . 71g37.1.1.41 CTP 1.1.17.2 Call-back answered by IVS in th

49、e event of abnormal termination - PE eCall IVS . 71g37.1.1.41.1 Test Purpose (TP) 71g37.1.1.41.2 Test applicability . 72g37.1.1.41.3 Conformance requirements 72g37.1.1.41.4 Test description . 72g37.1.1.42 CTP 1.1.17.3 MSD transfer occurs upon PSAP request during call-back - PE eCall IVS 73g37.1.1.42.1 Test Purpose (TP) 73g37.1.1.42.2 Test applicability . 73g37.1.1.42.3 Conformance requirements 73g37.1.1.42.4 Test description . 73g37.1.1.43 CTP 1.1.17.4 Remain registered for 1 hr - PE eCall IVS 74g37.1.1.43.1 Test Purpose (TP) 74g37.1.1.43.2 Test applicability . 74g37.1.1.43.3

展开阅读全文
相关资源
猜你喜欢
  • ASTM D4643-2000 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Microwave Oven Method《微波炉法测定土壤中含水量的标准试验方法》.pdf ASTM D4643-2000 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Microwave Oven Method《微波炉法测定土壤中含水量的标准试验方法》.pdf
  • ASTM D4643-2008 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating《微波炉法测定土壤中含水量的标准试验方法》.pdf ASTM D4643-2008 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating《微波炉法测定土壤中含水量的标准试验方法》.pdf
  • ASTM D4643-2017 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating《用微波炉加热法测定土壤和岩石含水量的标准试验方法》.pdf ASTM D4643-2017 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating《用微波炉加热法测定土壤和岩石含水量的标准试验方法》.pdf
  • ASTM D4644-2004 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks《油页岩和类似弱岩石抗崩解持久性的标准试验方法》.pdf ASTM D4644-2004 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks《油页岩和类似弱岩石抗崩解持久性的标准试验方法》.pdf
  • ASTM D4644-2008 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks《油页岩和类似弱岩石抗崩解持久性的标准试验方法》.pdf ASTM D4644-2008 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks《油页岩和类似弱岩石抗崩解持久性的标准试验方法》.pdf
  • ASTM D4644-2016 Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks《油页岩和类似软岩石潮解耐久性的标准试验方法》.pdf ASTM D4644-2016 Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks《油页岩和类似软岩石潮解耐久性的标准试验方法》.pdf
  • ASTM D4645-2004e1 Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method《用水力碎裂法测定现场岩石内应力的标准试验方法》.pdf ASTM D4645-2004e1 Standard Test Method for Determination of the In-Situ Stress in Rock Using the Hydraulic Fracturing Method《用水力碎裂法测定现场岩石内应力的标准试验方法》.pdf
  • ASTM D4646-2003 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments《24小时分批测量土壤和沉积物的污染物吸附作用的标准试验方法》.pdf ASTM D4646-2003 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments《24小时分批测量土壤和沉积物的污染物吸附作用的标准试验方法》.pdf
  • ASTM D4646-2003(2008) Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments《24小时分批测量土壤和沉积物的污染物吸附作用的标准试验方法》.pdf ASTM D4646-2003(2008) Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments《24小时分批测量土壤和沉积物的污染物吸附作用的标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1