1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelPrinciples of circuit telea Public Lan(3GPP TS 22.0TECHNICAL SPECIFICATION122 001 V13.0.0 (2016communications system (Phaelecommunications System (lecommunication services suand Mobile Network (PLMN) 2.001 version 13.0.0 Release 1GLOBAL SYSTEMOBIL
2、E COMMUN16-02) hase 2+); (UMTS); supported by 13 TEM FOR ICATIONSRETSI ETSI TS 122 001 V13.0.0 (2016-02)13GPP TS 22.001 version 13.0.0 Release 13Reference RTS/TSGS-0122001vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93
3、65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or
4、 in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print o
5、f the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at ht
6、tp:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic
7、 or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommu
8、nications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and t
9、he GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 122 001 V13.0.0 (2016-02)23GPP TS 22.001 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertain
10、ing to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretari
11、at. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on th
12、e ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities
13、, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “sh
14、all“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when use
15、d in direct citation. ETSI ETSI TS 122 001 V13.0.0 (2016-02)33GPP TS 22.001 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g30 Scope 6g30.1 References 6g30.2 Abbreviations . 6g31 Framework for the description of telecommunicatio
16、n services 7g31.1 The attribute method of characterization of circuit telecommunication services . 7g32 Description of circuit telecommunication services by the attribute method 7g32.1 General . 7g32.2 Categorisation of telecommunication services . 7g33 Characterization of circuit telecommunication
17、services . 7g33.1 General . 7g33.2 Bearer services . 8g33.3 Teleservices 8g34 Provision of telecommunication services . 8g34.1 Subscription checking for Basic Services 9g34.2 Subscription checking for Supplementary Services . 10g3Annex A (normative): List of definition of attributes and values used
18、for bearer services . 11g3A.1 Information transfer attributes 11g3A.1.1 Information transfer capability . 11g3A.1.2 Information transfer mode 11g3A.1.3 Information transfer rate . 11g3A.1.4 Structure . 11g3A.1.5 Establishment of communication . 12g3A.1.6 Communication configuration 12g3A.1.7 Symmetr
19、y . 12g3A.1.8 Data compression . 13g3A.2 Attributes describing the access at the user equipment 13g3A.2.1 Signalling access 13g3A.2.2 Information access 13g3A.2.2.1 Rate . 13g3A.2.2.2 Interface 13g3A.3 Interworking attribute . 14g3A.3.1 Type of terminating network 14g3A.3.2 Terminal to terminating n
20、etwork interface . 14g3A.4 General attributes . 14g3A.4.1 Supplementary services provided . 14g3A.4.2 Quality of service . 14g3A.4.3 Commercial and operational. 15g3A.4.4 Service interworking 15g3Annex B (normative): List of definitions of attributes and values used for teleservices . 16g3B.1 High l
21、ayer attributes . 16g3B.1.1 Type of user information 16g3B.1.2 Layer 4 protocol functions 16g3B.1.3 Layer 5 protocol functions 16g3ETSI ETSI TS 122 001 V13.0.0 (2016-02)43GPP TS 22.001 version 13.0.0 Release 13B.1.4 Layer 6 protocol functions 16g3B.1.5 Layer 7 protocol functions 16g3B.2 Low layer at
22、tribute (bearer capabilities). 16g3B.3 General attributes . 16g3Annex C (normative): Definition of “busy“ in a PLMN 17g3C.1 Scope 17g3C.2 Network Determined User Busy (NDUB) condition . 17g3C.3 User Determined User Busy (UDUB) condition 17g3C.4 Mobile subscriber busy 17g3Annex D (normative): Call se
23、t-up procedures . 18g3D.1 Scope 18g3D.2 Mobile Originated Call Set-up . 18g3D.2.1 Called Party Address 18g3D.2.2 Calling/Called Party Sub-address . 18g3D.2.3 Type of Number . 18g3D.2.4 Number Plan Indicator . 18g3D.2.5 Bearer Capability 19g3D.2.6 Calling Line Indication Restriction Override . 19g3D.
24、2.7 Action of the Network on Call Set-up 19g3D.3 Mobile Terminated Call Set-up 19g3D.3.1 Bearer Type 19g3D.3.2 Response of the UE 20g3D.3.3 Description of Call Re-establishment . 20g3Annex E (normative): Automatic calling repeat call attempt restrictions 21g3Annex F(informative): Procedures for call
25、 progress indications 23g3F.1 General . 23g3F.2 Supervisory tones . 23g3F.2.1 General . 23g3F.2.2 Method . 23g3F.2.3 Standard tones 23g3F.2.4 Applicability . 24g3F.2.5 Comfort tones . 24g3F.3 Recorded announcements . 25g3F.4 Application of call control cause information elements to supervisory tones
26、 26g3Annex G (informative): Change history . 27g3History 28g3ETSI ETSI TS 122 001 V13.0.0 (2016-02)53GPP TS 22.001 version 13.0.0 Release 13Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The present document defines the telecommunication
27、 services supported by a GSM PLMN within the digital cellular telecommunications system (Phase 2+). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be
28、re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second
29、 digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 001 V13.0.0 (2016-02)63GPP TS 22.001 version 13.0.0 Release 130 Scope The
30、present document covers the definition of the circuit telecommunication services supported by a PLMN. The purpose of the present document is to provide a method for the characterization and the description of these telecommunication services. TS 22.101 describes overall service principles of a PLMN.
31、 0.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequ
32、ent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.
33、905: “Vocabulary for 3GPP Specifications“. 2 ITU-T Recommendation I.221: “Common specific characteristics of services“. 3 ITU-T Recommendation X.200: “Information technology - Open Systems Interconnection - Basic reference model: The basic model“. 4 3GPP TS 22.101: “Service Principles“. 5 3GPP TS 22
34、.002: “Bearer services supported by a PLMN“. 6 3GPP TS 22.003: “Teleservices supported by a PLMN“. 7 3GPP TS 22.004: “General on Supplementary Services“. 8 3GPP TS 27.001: “General on Terminal Adaptation Functions (TAF) for Mobile Stations (MS)“. 9 3GPP TS 22.030: “Man-Machine Interface (MMI) of the
35、 User equipment (MS)“. 10 3GPP TS 22.081: “Line Identification Supplementary Servicess; Stage 1“. 11 3GPP TS 22.135: “Multicall; Stage 1“. 12 3GPP TS 24.008: “ Mobile radio interface layer 3 specification“. 13 3GPP TS 22.011: “Service accessibility“. 14 3GPP TS 23.003: “Numbering, addressing and ide
36、ntification“. 0.2 Abbreviations Abbreviations used in the present document are listed in 3GPP TR 21.905 1. ETSI ETSI TS 122 001 V13.0.0 (2016-02)73GPP TS 22.001 version 13.0.0 Release 131 Framework for the description of telecommunication services 1.1 The attribute method of characterization of circ
37、uit telecommunication services This characterization is made by using a set of attributes. A telecommunication service attribute is a specific characteristic of that service whole values distinguish it from other telecommunication services. Particular values are assigned to each attribute when a giv
38、en telecommunication service is described and defined. A list of definitions of attributes and values used for bearer services and teleservices is contained in, respectively, annex A and annex B. 2 Description of circuit telecommunication services by the attribute method 2.1 General Telecommunicatio
39、n services are described by attributes which define service characteristics as they apply at a given reference point where the customer accesses the service. The description of a telecommunication service by the method of attributes is composed of: - technical attributes as seen by the customer; and
40、 - other attributes associated with the service provision, e.g. operational and commercial attributes. 2.2 Categorisation of telecommunication services The concepts introduced in the present document are illustrated in table1. Table 1: Categorisation of telecommunication services TELECOMMUNICATION S
41、ERVICES BEARER SERVICE TELESERVICE Basic Bearer Service Basic Bearer service + supplementary services Basic Teleservice Basic Teleservice + supplementary service 3 Characterization of circuit telecommunication services 3.1 General A telecommunication service supported by a PLMN is characterized and
42、described by service attributes. There are two groups of service attributes applicable to user information flow: - low layer attributes; - high layer attributes. ETSI ETSI TS 122 001 V13.0.0 (2016-02)83GPP TS 22.001 version 13.0.0 Release 13Bearer services are characterized only by low layer attribu
43、tes. Teleservices are characterized by both low layer attributes and high layer attributes. The basic characteristics of a telecommunication service are described by the basic service attributes. The additional characteristics associated with a supplementary service which modify or supplement a basi
44、c telecommunication service are described in Specification 3GPP TS 22.004 7. 3.2 Bearer services Bearer services are characterized by a set of low layer attributes in Specification 3GPP TS 22.0025. These attributes are classified into four categories: - information transfer attributes; - access attr
45、ibutes; - interworking attributes; - general attributes, including operational and commercial attributes. The bearer capability defines the technical features of a bearer service as they appear to the user at the appropriate access point. For the time being, the bearer capability is characterized by
46、 information transfer, access and interworking attributes. A bearer capability is associated with every bearer service. 3.3 Teleservices Circuit teleservices provide the full capacity for communication by means of terminals and network functions and possibly functions provided by dedicated centres.
47、Circuit teleservices are specified in 3GPP TS 22.003 6. Teleservices are characterized by a set of low layer attributes, a set of high layer attributes and operational and commercial attributes. Low layer attributes are those used to characterize the bearer capability. High layer attributes are used
48、 in Specification 3GPP TS 22.003 6 to describe high layer (i.e. layer 4-7) information transfer related characteristics. They refer to functions and protocols of layers 4-7 in the ITU-T Recommendation X.200 framework which are concerned with the transfer, storage and processing of user messages (pro
49、vided by a subscribers terminal, a retrieval centre or a network service centre). Therefore, not all attributes can be applied directly at the user to terminal interface as they represent two kinds of features, the bearer capability and the terminal features, that are not directly perceived by the user. 4 Provision of telecommunication services Specifications 3GPP TS 22.1014 and 3GPP TS 22.011 13 define some aspects of the provisions of telecommunication services by a 3GPP system. The provision of telecommunication services imp
