1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelMan-Machine Interfac(3GPP TS 22.0TECHNICAL SPECIFICATION122 030 V13.0.0 (2016communications system (Phaelecommunications System (LTE; face (MMI) of the User Equipm.030 version 13.0.0 Release 1316-02) hase 2+); (UMTS); ment (UE) 13) ETSI ETSI TS 12
2、2 030 V13.0.0 (2016-02)13GPP TS 22.030 version 13.0.0 Release 13Reference RTS/TSGS-0122030vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif e
3、nregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present
4、 document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive
5、 within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present do
6、cument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by
7、written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM,
8、 UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI
9、 ETSI TS 122 030 V13.0.0 (2016-02)23GPP TS 22.030 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members a
10、nd non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/
11、). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the pres
12、ent document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being ref
13、erences to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will n
14、ot“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 030 V13.0.0 (2016-02)33GPP TS 22.030 v
15、ersion 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 General . 7g34.1 Basic philosophy 7g35 Physical user input features 8g35
16、.1 General . 8g35.2 MMI related to UE features 8g36 Procedures 9g36.1 General . 9g36.2 UE access . 9g36.3 Definition of functions . 9g36.4 Call Control 10g36.4.1 General 10g36.4.2 Voice calls 10g36.4.2.1 Mobile originated calls 10g36.4.2.2 Emergency calls 10g36.4.2.3 Mobile terminated calls . 10g36.
17、5 Supplementary Services Control 10g36.5.1 General 10g36.5.2 Structure of the MMI 11g36.5.3 Handling of supplementary services . 12g36.5.3.1 Handling of defined supplementary services 12g36.5.3.2 Handling of not-implemented supplementary services . 12g36.5.4 Registration of new password . 15g36.5.5
18、Handling of supplementary services within a call 15g36.5.5.1 Call Deflection, Call Waiting, Call Hold, MultiParty Services, Explicit Call Transfer and Completion of Calls to Busy Subscriber general principles 15g36.5.5.2 Call Waiting (CW) 16g36.5.5.3 Call hold 16g36.5.5.4 MultiParty . 17g36.5.5.5 Ex
19、plicit Call Transfer 17g36.5.5.6 Special case . 17g36.5.5.7 Call Deflection 17g36.5.5.8 Completion of calls to busy subscribers 17g36.5.6 Other handling of supplementary services 17g36.5.6.1 Multiple Subscriber Profile . 17g36.5.6.1.1 Registering an alternative profile. 17g36.5.6.1.2 Selecting an al
20、ternative profile on a per call basis . 18g36.5.6.2 Calling Line Identification Presentation (CLIP) . 18g36.6.6.2.1 Presentation of Information . 18g36.5.6.3 Follow Me (FM) 18g36.6 SIM/USIM interfaces . 18g36.6.1 Entry of PIN and PIN2 18g36.6.2 Change of PIN or PIN2 . 18g3ETSI ETSI TS 122 030 V13.0.
21、0 (2016-02)43GPP TS 22.030 version 13.0.0 Release 136.6.3 Unblocking of PIN or PIN2 19g36.6.4 Reading the abbreviated dialling code 19g36.6.5 Status information - return codes 19g36.7 Presentation of IMEI 19g36.8 In Case of Emergency access procedure 20g36.9 Presentation of e-marking 20g3Annex A (no
22、rmative): UE access mealy graph 21g3Annex B (normative): Codes for defined Supplementary Services . 23g3Annex C (normative): Codes for Tele- and bearer services . 26g3Annex D (informative): Change history . 28g3History 29g3ETSI ETSI TS 122 030 V13.0.0 (2016-02)53GPP TS 22.030 version 13.0.0 Release
23、13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it w
24、ill be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the
25、 second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 030 V13.0.0 (2016-02)63GPP TS 22.030 version 13.0.0 Release 131 Sco
26、pe The present document defines the requirements for and gives guidelines on the MMI on the User Equipment (UE). This includes the requirements of the user procedures for call control and supplementary service control, the requirements on the physical input media and the output, such as indications
27、and displayed information. Some clauses of the present document include the requirements that are applicable only to UE connected to CS Domain. See 3GPP TS 22.101 18; for overall service principles and 3GPP TS 22.001 19 for Circuit telecommunication services. 2 References The following documents con
28、tain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-speci
29、fic reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“.
30、2 3GPP TS 22.004: “General on supplementary services“. 3 3GPP TS 22.011: “Service accessibility“. 4 3GPP TS 22.016: “International Mobile station Equipment Identities (IMEI)“. 5 3GPP TS 22.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services Stage 1“. 6 3GPP TS 22.084: “MultiParty (MP
31、TY) supplementary services Stage 1“. 7 3GPP TS 22.090: “Stage 1 description of Unstructured Supplementary Service Data (USSD)“. 8 3GPP TS 23.038: “Alphabets and language“. 9 3GPP TS 24.008: “Mobile radio interface layer 3 specification; Core Network Protocols Stage 3“. 10 3GPP TS 24.080: “Mobile rad
32、io interface layer 3 supplementary services specification Formats and coding“. 11 3GPP TS 29.002 : “Mobile Application Part (MAP)“. 12 3GPP TS 22.081: “Line Identification Supplementary Services Stage 1“. 13 ITU-T Recommendation E.164: “Numbering plan for the ISDN era“. 14 ITU-T Recommendation E.121
33、: “Pictograms and symbols to assist users of the telephone service“. 15 3GPP TS 22.072: “Call Deflection; Stage 1“. 16 3GPP TS 22.091: “Explicit Call Transfer Supplementary Service; Stage 1“. 17 3GPP TS 22.093: “Call Completion to Busy Subscriber (CCBS); Stage 1“. 18 3GPP TS 22.101: “Service princip
34、les“. ETSI ETSI TS 122 030 V13.0.0 (2016-02)73GPP TS 22.030 version 13.0.0 Release 1319 3GPP TS 22.001: “Principles of circuit telecommunication services supported by a Public Land Mobile Network (PLMN)“. 20 3GPP TS 22.094: “Follow Me Service description Stage 1“. 21 3GPP TS 22.135: “Multicall suppl
35、ementary service Stage 1“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following definition applies: Directory Number: A string consisting of one or more of the characters from the set 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, *, #, a, b, c associated with a nat
36、ure of address indicator and number plan indicator. When using the public MMI for the control of supplementary services however, * and # cannot be part of any SC or SI field. NOTE 1: No such restriction on the SC and SI fields exists when using other (e.g. menu-driven) MMI for the control of supplem
37、entary services. NOTE 2: When using the public MMI, certain limitations on the use of one and two digit directory numbers may apply. The use of other MMI can remove these restrictions. NOTE 3: This definition is not intended to require the support of all these characters in the MMI itself. 3.2 Abbre
38、viations For the purposes of the present document, the abbreviations listed in 3GPP TR 21.905 18 apply. 4 General 4.1 Basic philosophy The basic idea behind the present document is that it should give a minimum level of requirements, with emphasis on items which are seen as important from a usage po
39、int of view. This means, that the requirements are mainly dealing with standardized control procedures of access to services i.e. call establishment, invocation of supplementary services and so on. The requirements on the physical layout of input and output features are kept to a minimum to allow fo
40、r differentiated types of Ues and to ease the introduction of future developments in the area of MMI. The standardized control procedures describe the sequence of real actions to be taken by the users. However, since the requirements on the physical input features are minimal the control procedures
41、may differ between Ues depending on the solution of the manufacturers. The “bridge“ between these requirements is however that the same logical actions have to be taken by the user. That is, the user has to provide the same information for the call control and signalling no matter what the method is
42、. This is also valid if an automatic device is used for carrying out the same actions. The logical procedures are therefore defined and standardized in the present document. Optionally, the user may set the ME to disable some or all of the MMI functions defined in the present document. This setting
43、shall only apply when the same SIM/USIM is in use otherwise the ME shall enable the standard MMI. ETSI ETSI TS 122 030 V13.0.0 (2016-02)83GPP TS 22.030 version 13.0.0 Release 135 Physical user input features 5.1 General This clause gives the requirements or guidelines for the MMI of the input relate
44、d UE features. Basic requirements on these features are given in 3GPP TS 22.101 18. 5.2 MMI related to UE features * Country/PLMN selection: The method is manufacturer optional. * International Access Function (“+“ key): and * Keypad: The physical means of entering the characters 0-9, +, * and # (i.
45、e. the SELECT function) may be keypad, voice input device, DTE or other, but there must be means to enter this information. The relationship on the keypad between the numbers and letters (where used) is important when mnemonic dialling may be used. The following relationship is therefore preferred t
46、hough optional. 1 6 MNO 2 ABC 7 PQRS 3 DEF 8 TUV4 GHI 9 WXYZ 5 JKL 0 * ACCEPT, SEND and END functions: The physical means to perform these functions may be keypad, voice input device, DTE or other, but there must be means to perform these functions. ACCEPT and SEND may use the same means. * Setting
47、of called Number Fields (Type of Number), use of the “+“ key function: Users may enter a called number in two formats, called here International or Open. The Type of Number (TON) may be set to other values if required, but the procedure for this is not defined here. “International format“: This is e
48、ntered by starting with a “+“ followed by country code, even for national calls. This method is preferred for roaming and international calls, and highly desirable for storage of short codes or for call-forwarding. This sets the TON to “International“ - see 3GPP TS 24.008 9. “Open format“: This is w
49、hen the “+“ is not entered, and the number is entered in the normal way for that network. The number may require a prefix or escape code as normal, for example for entering the international access code or national access code (often “0“). This sets the TON to “Unknown“ - see 3GPP TS 24.008 9. (This is not the “National“ case, which does not permit prefix or escape digits). Care should be taken with this format, since the dialled number will only be correct in a given network, and may be wrong when roami
