1、 ETSI TS 122 076 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Noise suppression for the AMR codec; Service description; Stage 1 (3GPP TS 22.076 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 12
2、2 076 V15.0.0 (2018-07)13GPP TS 22.076 version 15.0.0 Release 15Reference RTS/TSGS-0422076vf00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif e
3、nregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present
4、 document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive
5、 within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the
6、present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as auth
7、orized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trad
8、emarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the
9、GSM Association. ETSI ETSI TS 122 076 V15.0.0 (2018-07)23GPP TS 22.076 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any,
10、 is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on
11、the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may
12、 be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no rig
13、ht to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Gene
14、ration Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP
15、 and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafti
16、ng Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 076 V15.0.0 (2018-07)33GPP TS 22.076 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs
17、terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g34 Description . 5g34.1 Applicability of Noise Suppression to Basic Services 5g34.2 Support in Mobile Stations (MS) . 5g34.3 Support in the Network 6g34.4 Parameters to be indicated and negotiated . 6g34.5 Pr
18、ovision of Service . 6g34.5.1 Location Independence . 6g34.5.2 Provision of service within and between networks . 6g34.5.3 Subscription and Billing Information . 6g34.6 Quality of Service (QoS) 6g34.6.1 Impact on Speech Quality . 6g34.6.1.1 Initial Convergence Time 6g34.6.1.2 No Degradation in Clean
19、 Speech 6g34.6.1.3 No Artefacts in Residual Noise . 7g34.6.1.4 No Speech Clipping and no Reduction in Intelligibility . 7g34.6.1.5 Quality Impact compared to AMR 7g34.6.2 Impact on Speech Path Delay . 7g34.7 Impact on Complexity 7g34.8 Impact on Channel Activity 7g35 Interaction with supplementary s
20、ervices 8g35.1 General . 8g35.2 Explicit Call Transfer (ECT) 8g35.3 Call wait/Call hold 8g35.4 Multiparty . 8g35.5 Service Announcements . 8g36 Interaction with Alternate and Followed by services . 8g37 Interaction with other speech services 8g38 Interaction with DTMF and other signalling tones 8g39
21、 Interaction with Lawful Intercept . 8g310 Interaction with TFO 9g3Annex A (informative): Change Request History 10g3History 11g3ETSI ETSI TS 122 076 V15.0.0 (2018-07)43GPP TS 22.076 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Pro
22、ject (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in ve
23、rsion number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, correc
24、tions, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 076 V15.0.0 (2018-07)53GPP TS 22.076 version 15.0.0 Release 151 Scope The present document specifies the stage 1 description for the Noise Suppression feature fo
25、r the AMR codec which enhances the input speech signal corrupted by acoustic noise. In analogy with ITU-T Recommendations I.130 1, Stage 1 is an overall service description, from the service subscribers and users standpoints, that views the network as a single entity which provides services to the u
26、ser. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, s
27、ubsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 ITU
28、-T Recommendations I.130 (1988): “Method for the characterization of telecommunication services supported by an ISDN and network capabilities of an ISDN“. 2 GSM 01.04 (ETR 350): “Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms“. 3 GSM 03.50: “Digital cellular teleco
29、mmunications system (Phase 2+); Transmission planning aspects of the speech service in the GSM Public Land Mobile Network (PLMN) system“. 3 Definitions and abbreviations GSM 01.04 2 (ETR 350) provides a list of abbreviations and acronyms used in GSM specifications. 4 Description Noise Suppression fo
30、r the AMR codec is an optional feature designed to enhance speech quality in a range of environments where there is significant (acoustic) background noise. The noise suppression function is a preprocessing module that is used to improve the signal to noise ratio of a speech signal prior to voice co
31、ding. In so doing it may use functions and/or data from the AMR speech encoding function. It shall be possible to implement AMR Noise Suppression in the mobile station (operating on the uplink speech signal). The possibility to implement AMR Noise Suppression in the network (operating on the downlin
32、k speech signal) is for further study. The noise suppression specification shall be comprised of bit exact fixed point C code. Test vectors shall be defined to verify operation. The AMR Speech decoder C-code should not be altered by the Noise Suppression. It shall be possible for the network to disa
33、ble the operation of the example noise suppression algorithm defined by this feature, whether that operation is operational in the network, the mobile station, or both locations. 4.1 Applicability of Noise Suppression to Basic Services. This feature shall be applicable (as an option) to all speech c
34、alls where the narrowband AMR codec is utilised. Operation of noise suppression for wideband AMR is for further study. 4.2 Support in Mobile Stations (MS) Support of the Noise Suppression feature shall require modifications to future mobile stations. Provision of the feature in AMR-capable mobile st
35、ations is a manufacturer dependent option. ETSI ETSI TS 122 076 V15.0.0 (2018-07)63GPP TS 22.076 version 15.0.0 Release 15Use of the feature in the network during a call should not place any requirements on its use within the MS. Similarly, use of the feature by the MS during a call shall not place
36、any requirements on its use in the network. The network shall be able to enable or disable this example optional noise suppression function both at call set-up and in call Signalling between network and mobile to allow this control is under study in SMG2 WPA. 4.3 Support in the Network Provision of
37、the feature in the network should be an option. Use of the feature in the network during a call should not place any requirements on its use within the MS. Similarly, use of the feature by the MS during a call should not place any requirements on its use in the network. The network should be able to
38、 enable or disable this example optional noise suppression function both at call set-up and in call. 4.4 Parameters to be indicated and negotiated TBD 4.5 Provision of Service 4.5.1 Location Independence The Noise suppression feature shall be location independent. 4.5.2 Provision of service within a
39、nd between networks Provision of the feature is the same whether or not the call is wholly contained within a network or between networks. 4.5.3 Subscription and Billing Information This feature shall not be provisioned on a per-subscriber basis and no record of the application of Noise Suppression
40、is necessary for billing purposes. 4.6 Quality of Service (QoS) 4.6.1 Impact on Speech Quality The following performance requirements are stated under the assumption that the noise suppressor is tested as an integral part of the AMR speech codec with the speech codec operating at the following rates
41、 TBD. The performance requirements must be met for all these stated speech codec rates. 4.6.1.1 Initial Convergence Time The initial convergence time shall be a maximum of T seconds with T equal to 2s. The definition of this time interval shall be understood strictly in accordance with its means of
42、use in subjective listening experiments. Its use shall be defined by a process whereby the first T seconds of each sample processed through the AMR speech codec with and without noise suppression active, is deleted before presentation to listeners. It is assumed that this process does not reduce int
43、elligibility, or introduce clipping or similar effects into the resultant speech plus noise material. To test the subjective effect of initial convergence, there will be a subset of subjective testing defined where this initial period of T seconds is not removed from the processed samples. These tes
44、ts should be representative of the full range of noise conditions. 4.6.1.2 No Degradation in Clean Speech The noise suppression function must not have a statistically significant distorting effect on clean speech, in comparison with the performance of the AMR codec without noise suppression applied.
45、 This requirement also applies to the case where tandeming of the standardised example noise suppression function occurs for mobile to mobile calls, in which case the reference condition is the tandem condition without noise suppression activated. ETSI ETSI TS 122 076 V15.0.0 (2018-07)73GPP TS 22.07
46、6 version 15.0.0 Release 15This requirement also applies when VAD/DTX is active. 4.6.1.3 No Artefacts in Residual Noise The noise suppression function must not introduce any subjectively objectionable artefacts in the residual noise. This requirement also applies to the case where tandeming of the s
47、tandardised example noise suppression function occurs for mobile to mobile calls, in which case the reference condition is the tandem condition without noise suppression activated. This requirement also applies when VAD/DTX is active. 4.6.1.4 No Speech Clipping and no Reduction in Intelligibility Th
48、e noise suppression function should introduce no subjectively objectionable degradation such as clipping or distortion in the speech, and no reduction in intelligibility. This requirement also applies to the case where tandeming of the standardised example noise suppression function occurs for mobil
49、e to mobile calls, in which case the reference condition is the tandem condition without noise suppression activated. This requirement also applies when VAD/DTX is active. 4.6.1.5 Quality Impact compared to AMR The AMR speech codec with noise suppression activated must produce an output in noisy speech which is preferred amongst test listeners with statistical significance, compared to the case where noise suppression is not used. This requirement also applies to the case where tandeming of the standardised example noise suppression function occurs for mobile
