ETSI TS 122 081-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Line Identification supplementary services Stage .pdf

上传人:sumcourage256 文档编号:740448 上传时间:2019-01-11 格式:PDF 页数:20 大小:114.11KB
下载 相关 举报
ETSI TS 122 081-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Line Identification supplementary services Stage .pdf_第1页
第1页 / 共20页
ETSI TS 122 081-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Line Identification supplementary services Stage .pdf_第2页
第2页 / 共20页
ETSI TS 122 081-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Line Identification supplementary services Stage .pdf_第3页
第3页 / 共20页
ETSI TS 122 081-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Line Identification supplementary services Stage .pdf_第4页
第4页 / 共20页
ETSI TS 122 081-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Line Identification supplementary services Stage .pdf_第5页
第5页 / 共20页
点击查看更多>>
资源描述

1、 ETSI TS 122 081 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Line Identification supplementary services; Stage 1 (3GPP TS 22.081 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICA

2、TIONSRETSI ETSI TS 122 081 V14.0.0 (2017-03)13GPP TS 22.081 version 14.0.0 Release 14Reference RTS/TSGS-0122081ve00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association b

3、ut non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versio

4、ns of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a speci

5、fic network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you fi

6、nd errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfi

7、lm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights res

8、erved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned b

9、y the GSM Association. ETSI ETSI TS 122 081 V14.0.0 (2017-03)23GPP TS 22.081 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly a

10、vailable for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web s

11、erver (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may be

12、come, essential to the present document. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between

13、GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of

14、the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 081 V14.0.0 (2017-03)33GPP TS 22.081 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword .

15、2g3Modal verbs terminology 2g3Foreword . 5g30 Scope 6g30.1 References 7g30.2 Abbreviations . 7g31 Calling Line Identification Presentation (CLIP) 7g31.1 Definition . 7g31.2 Description . 7g31.2.1 Description 7g31.2.2 Applicability to telecommunication services 8g31.3 Normal procedures with successfu

16、l outcome . 8g31.3.1 Provision . 8g31.3.2 Withdrawal . 8g31.3.5 Activation . 8g31.3.6 Deactivation 8g31.3.7 Invocation . 8g31.3.8 Normal operation with successful outcome 8g31.3.11 Interrogation . 9g31.4 Exceptional procedures or unsuccessful outcome 9g31.5 Alternate procedures . 9g31.6 Interactions

17、 with other Supplementary Services 9g31.6.81.2 Calling line identification restriction . 9g31.6.82.1 Call forwarding unconditional 9g31.6.82.2 Call forwarding on mobile subscriber busy 9g31.6.82.3 Call forwarding on no reply 9g31.6.82.4 Call forwarding on mobile subscriber not reachable . 9g31.6.83.

18、1 Call Waiting 9g31.6.88.8 Anonymous Call Rejection . 10g31.7 Interworking considerations . 10g32 Calling Line Identification Restriction (CLIR) 10g32.1 Definition . 10g32.2 Description . 10g32.2.1 Description 10g32.2.2 Applicability to telecommunications services 10g32.3 Normal procedures with succ

19、essful outcome . 10g32.3.1 Provision . 10g32.3.2 Withdrawal . 10g32.3.5 Activation . 10g32.3.6 Deactivation 11g32.3.7 Invocation . 11g32.3.8 Normal operation with successful outcome 11g32.3.11 Interrogation . 11g32.4 Exceptional procedures or unsuccessful outcome 11g32.5 Alternate Procedures 11g32.6

20、 Interactions with other Supplementary Services 12g32.6.81.1 Calling line identification presentation . 12g32.6.82.1 Call forwarding unconditional 12g32.6.82.2 Call forwarding on mobile subscriber busy 12g32.6.82.3 Call forwarding on no reply 12g32.6.82.4 Call forwarding on mobile subscriber not rea

21、chable . 12g32.7 Interworking considerations . 12g33 Connected Line Identification Presentation (COLP) . 12g3ETSI ETSI TS 122 081 V14.0.0 (2017-03)43GPP TS 22.081 version 14.0.0 Release 143.1 Definition . 12g33.2 Description . 12g33.2.1 Description 12g33.2.2 Applicability to telecommunication servic

22、es 13g33.3 Normal procedure with successful outcome . 13g33.3.1 Provision . 13g33.3.2 Withdrawal . 13g33.3.5 Activation . 13g33.3.6 Deactivation 13g33.3.7 Invocation . 13g33.3.8 Normal operation with successful outcome 13g33.3.11 Interrogation . 13g33.4 Exceptional procedures or unsuccessful outcome

23、 14g33.5 Alternate procedures . 14g33.6 Interactions with other Supplementary Services 14g33.6.81.4 Connected line identification restriction . 14g33.6.82.1 Call forwarding unconditional 14g33.6.82.2 Call forwarding on mobile subscriber busy 14g33.6.82.3 Call forwarding on no reply 14g33.6.82.4 Call

24、 forwarding on mobile subscriber not reachable . 14g33.6.84.1 Multiparty 14g33.7 Interworking considerations . 14g34 Connected Line Identification Restriction (COLR) . 15g34.1 Definition . 15g34.2 Description . 15g34.2.1 Description 15g34.2.2 Applicability to telecommunications services 15g34.3 Norm

25、al procedures with successful outcome . 15g34.3.1 Provision . 15g34.3.2 Withdrawal . 15g34.3.5 Activation . 15g34.3.6 Deactivation 15g34.3.7 Invocation . 15g34.3.8 Normal operation with successful outcome 15g34.3.11 Interrogation . 16g34.4 Exceptional procedures or unsuccessful outcome 16g34.5 Alter

26、nate procedures . 16g34.6 Interactions with other Supplementary Services 16g34.6.81.3 Connected line identification presentation 16g34.6.82.1 Call forwarding unconditional 16g34.6.82.2 Call forwarding on mobile subscriber busy 16g34.6.82.3 Call forwarding on no reply 16g34.6.82.4 Call forwarding on

27、mobile subscriber not reachable . 16g34.7 Interworking consideration . 16g3Annex A (informative): Change history . 18g3History 19g3ETSI ETSI TS 122 081 V14.0.0 (2017-03)53GPP TS 22.081 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partne

28、rship Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an incre

29、ase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancement

30、s, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 081 V14.0.0 (2017-03)63GPP TS 22.081 version 14.0.0 Release 140 Scope The present document describes the Supplementary Services belonging to the group L

31、ine Identification Supplementary Services. The general aspects, including definitions and recommended provision, of the description of the Supplementary Services are given in 3GPP TS 22.004. The group of Line Identification Supplementary Services is divided into the following four Supplementary Serv

32、ices: CLIP - Calling line identification presentation (clause 1); CLIR - Calling line identification restriction (clause 2); COLP - Connected line identification presentation (clause 3); COLR - Connected line identification restriction (clause 4). Definition of line identity: The line identity is ma

33、de up of a number of information units: - the subscribers national ISDN/MSISDN number (MSISDN number is the number stored in the VLR); - the country code; - optionally, subaddress information. The PLMN cannot be responsible for the content of this subaddress. (For definition of the subaddress see IT

34、U-T Recommendation E.164 3 subclause 11.2). In a full ISDN environment, the line identity shall include all the address information necessary to unambiguously identify a subscriber. The calling line identity is the line identity of the calling party. The connected line identity is the line identity

35、of the connected party. If for the line identity of the calling party or the connected party additional line identification is received (additional calling party/connected party number) in a PLMN this additional line identification shall be used for the presentation purpose of the line identificatio

36、n presentation services. Definition of Presentation and Screening Indicators: In addition to or instead of the line identity, the network may give a Presentation Indicator (PI) and/or a Screening Indicator (SI) to the served subscriber. The following information may be given: - Presentation Indicato

37、r showing: a) presentation allowed, or b) presentation restricted, or c) number not available due to interworking; If Presentation Indicator is set to “Presentation Restricted“, then the MS can get additional information on the Cause of no CLI, if provided by the network. The Cause of no CLI value m

38、ay be one of the following : - Unavailable - reject by user - interaction with other services - coin line / pay phone - Screening Indicator showing: a) user provided, verified and passed, or ETSI ETSI TS 122 081 V14.0.0 (2017-03)73GPP TS 22.081 version 14.0.0 Release 14b) user provided, not screened

39、, or c) network provided. If the line identity is that of a PLMN subscriber, then: the national number and the country code shall always be provided by the network; the subaddress shall only be included if it is provided by the user (or user equipment); the screening indicator shall indicate “networ

40、k provided“. 0.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are

41、 either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document),

42、 a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “ Vocabulary for 3GPP Specifications “. 2 3GPP TS 22.004: General on Supplementary Services“. 3 ITU-T Recommendation E.164: “Numbering plan for the ISDN e

43、ra“. 4 3GPP TS 22.088: “Call Barring (CB) supplementary services Stage 1”. 0.2 Abbreviations Abbreviations used in the present document are listed in 3GPP TR 21.905 1. 1 Calling Line Identification Presentation (CLIP) 1.1 Definition The CLIP Supplementary Service provides the called party with the p

44、ossibility to receive the line identity of the calling party. 1.2 Description 1.2.1 Description This Supplementary Service provides for the ability to indicate the line identity of the calling party to the called party. The network shall deliver the calling line identity to the called party at call

45、set-up time, regardless of the terminal capability to handle the information. ETSI ETSI TS 122 081 V14.0.0 (2017-03)83GPP TS 22.081 version 14.0.0 Release 141.2.2 Applicability to telecommunication services The applicability of this Supplementary Service is defined in 3GPP TS 22.004 2. 1.3 Normal pr

46、ocedures with successful outcome 1.3.1 Provision This Supplementary Service is provisioned for all Basic Services subscribed to and to which it is applicable, i.e. not provisioned for any subset of these Basic Services. Override category within a PLMN Override category within an ISDN/PLMN. Depending

47、 on national regulations, some networks may define categories of subscribers that have the ability to override the presentation restriction (CLIR, clause 2) and have the calling line identity presented (e.g., the police). The ability to have such override category is a national option. Override cate

48、gory between a PLMN and a network providing calling line identification restriction Override category between ISDN/PLMNs. When a call originates in one ISDN/PLMN and terminates in another ISDN/PLMN and the CLIR Supplementary Service is applied, the rules and regulations of the destination network sh

49、all apply. For example, the override category may not be applicable in the originating network but may be applicable in the destination network. In this situation, a call with the CLIR Supplementary Service applied can still be overridden in the destination network. The override category is only applicable within the HPLMN country. 1.3.2 Withdrawal The CLIP Supplementary Service shall be withdrawn at the customers request or for administrative reasons. 1.3.5 Activation The CLIP Supplementary Service is activated as a result of provision. 1.3.6 Deactiva

展开阅读全文
相关资源
猜你喜欢
  • DIN 51008-2-2001 Optical Emission Spectrometry (OES) - Part 2 Terms for flame and plasma systems《发射光谱测定分析(OES) 第2部分 火焰和等离子系统术语》.pdf DIN 51008-2-2001 Optical Emission Spectrometry (OES) - Part 2 Terms for flame and plasma systems《发射光谱测定分析(OES) 第2部分 火焰和等离子系统术语》.pdf
  • DIN 51009-2013 Optical atomic spectral analysis - Principles and definitions《原子光谱分析 原理和定义》.pdf DIN 51009-2013 Optical atomic spectral analysis - Principles and definitions《原子光谱分析 原理和定义》.pdf
  • DIN 51028-1998 Testing of filter sands for air-raid shelter ventilation - Determination of flow resistance《防空洞通风用滤砂试验 气流阻力测定》.pdf DIN 51028-1998 Testing of filter sands for air-raid shelter ventilation - Determination of flow resistance《防空洞通风用滤砂试验 气流阻力测定》.pdf
  • DIN 51030-2015 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products《陶瓷原料和基本材料的测试 不烧制品的干燥弯曲强度的测定》.pdf DIN 51030-2015 Testing of ceramic raw and basic materials - Determination of dry bending strength of unfired products《陶瓷原料和基本材料的测试 不烧制品的干燥弯曲强度的测定》.pdf
  • DIN 51032-2017 Ceramics glass glass ceramics - Permissible limits for the release of lead and cadmium from articles intended for use in contact with food《陶瓷、玻璃、玻璃陶瓷 与食品接触使用的日用品中铅和镉.pdf DIN 51032-2017 Ceramics glass glass ceramics - Permissible limits for the release of lead and cadmium from articles intended for use in contact with food《陶瓷、玻璃、玻璃陶瓷 与食品接触使用的日用品中铅和镉.pdf
  • DIN 51043-1979 Trass Requirements Tests《粗面凝灰岩 要求 试验》.pdf DIN 51043-1979 Trass Requirements Tests《粗面凝灰岩 要求 试验》.pdf
  • DIN 51045-1-2005 Determination of the thermal expansion of solids - Part 1 Basic rules《固体热膨胀的测定 第1部分 基本原则》.pdf DIN 51045-1-2005 Determination of the thermal expansion of solids - Part 1 Basic rules《固体热膨胀的测定 第1部分 基本原则》.pdf
  • DIN 51045-2-2009 Determination of linear thermal expansion of solids - Part 2 Testing of fired fine ceramic materials using the dilatometer method《固体线性热膨胀的测定 第2部分 使用膨胀计方法测试点燃式精细陶瓷材.pdf DIN 51045-2-2009 Determination of linear thermal expansion of solids - Part 2 Testing of fired fine ceramic materials using the dilatometer method《固体线性热膨胀的测定 第2部分 使用膨胀计方法测试点燃式精细陶瓷材.pdf
  • DIN 51045-3-2009 Determination of linear thermal expansion of solids - Part 3 Testing of non-fired fine ceramic materials using the dilatometer method《固体线性热膨胀的测定 第3部分 使用膨胀计方法测试非点燃式.pdf DIN 51045-3-2009 Determination of linear thermal expansion of solids - Part 3 Testing of non-fired fine ceramic materials using the dilatometer method《固体线性热膨胀的测定 第3部分 使用膨胀计方法测试非点燃式.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1