1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelMultiParty (MP(3GPP TS 22.0TECHNICAL SPECIFICATION122 084 V13.0.0 (2016communications system (Phaelecommunications System (MPTY) supplementary serviceStage 1 .084 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); (UMTS); ce; 13) T
2、EM FOR ICATIONSRETSI ETSI TS 122 084 V13.0.0 (2016-01)13GPP TS 22.084 version 13.0.0 Release 13Reference RTS/TSGS-0122084vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Ass
3、ociation but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or pr
4、int versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept
5、on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you fi
6、nd errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfi
7、lm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights res
8、erved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned b
9、y the GSM Association. ETSI ETSI TS 122 084 V13.0.0 (2016-01)23GPP TS 22.084 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly a
10、vailable for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web s
11、erver (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may be
12、come, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should
13、be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“,
14、“need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 084 V13.0.0
15、 (2016-01)33GPP TS 22.084 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g30 Scope 5g30.1 References 5g30.2 Abbreviations . 5g31 MultiParty Service (MPTY) . 5g31.1 Definition . 5g31.2 Description . 5g31.2.1 Description 5g31.2.1.
16、1 Indication about multiParty status . 6g31.2.2 Applicability to telecommunication services 6g31.2.3 Terminology . 6g31.3 Normal procedures with successful outcome . 6g31.3.1 Provision . 6g31.3.2 Withdrawal . 6g31.3.5 Activation . 6g31.3.6 Deactivation 6g31.3.7 Invocation . 7g31.3.8 Normal operation
17、 with successful outcome 7g31.3.8.1 Beginning the multiParty call 7g31.3.8.2 Managing an active multiParty call . 7g31.3.8.3 Managing a held multiParty call . 8g31.3.8.4 Managing a single call and a MPTY . 8g31.3.8.4.1 Single active call 8g31.3.8.4.2 Active MPTY and held call . 8g31.3.8.5 Remote par
18、ties in a Multi-Party Call . 9g31.4 Exceptional procedures or unsuccessful outcome 9g31.5 Alternate procedures . 9g31.6 Interactions with other Supplementary Services 9g31.6.81.3 Connected line identification presentation 9g31.6.82.1 Call forwarding unconditional 9g31.6.82.2 Call forwarding on mobil
19、e subscriber Busy 10g31.6.82.3 Call forwarding on no reply 10g31.6.82.4 Call Forwarding on mobile subscriber not reachable 10g31.6.83.1 Call waiting . 10g31.6.83.2 Call hold 10g31.6.84.1 Multi-party service 10g31.6.85.1 Closed user group 10g31.6.88.1 Barring of all outgoing calls 10g31.6.88.2 Barrin
20、g of outgoing international calls 10g31.6.88.4 Barring of outgoing international calls except those directed to the home PLMN country 11g31.6.88.6 Barring of incoming calls 11g31.6.88.7 Barring of incoming calls when roaming outside the home PLMN country . 11g31.7 Interworking considerations . 11g3A
21、nnex A (informative): Change history . 12g3History 13g3ETSI ETSI TS 122 084 V13.0.0 (2016-01)43GPP TS 22.084 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuin
22、g work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 present
23、ed to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only
24、changes have been incorporated in the document. ETSI ETSI TS 122 084 V13.0.0 (2016-01)53GPP TS 22.084 version 13.0.0 Release 130 Scope The present document describes the Supplementary Services belonging to the group MultiParty Supplementary Services. The general aspects, including definitions and re
25、commended provision, of the description of the Supplementary Services are given in TS 22.004. The group of Supplementary Services MultiParty Supplementary Services consists of one Supplementary Service: - MultiParty service (Clause 1). 0.1 References The following documents contain provisions which,
26、 through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the lat
27、est version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 21.905: “Vocabulary for 3GPP Specifications“ 2 3GPP TS 22.004: “Gene
28、ral on Supplementary Services“. 3 3GPP TS 22.030: “Man-Machine Interface (MMI) of the Mobile Station (MS)“. 4 3GPP TS 22.083: “Call Waiting (CW) and Call Hold (HOLD) Supplementary Services - Stage 1“. 5 3GPP TS 22.085 “Closed User Group (CUG) Supplementary Services - Stage 1“. 0.2 Abbreviations Abbr
29、eviations used in the present document are listed in TS 21.905. 1 MultiParty Service (MPTY) 1.1 Definition This Supplementary Service provides a mobile subscriber with the ability to have a multi-connection call, i.e. a simultaneous communication with more than one party. 1.2 Description 1.2.1 Descr
30、iption A precondition for the multi-party service is that the served mobile subscriber is in control of one active call and one call on hold, both calls having been answered. In this situation the served mobile subscriber can request the network to begin the multiParty service. ETSI ETSI TS 122 084
31、V13.0.0 (2016-01)63GPP TS 22.084 version 13.0.0 Release 13Once a multiParty call is active, remote parties may be added, disconnected or separated (i.e. removed from the multiParty call but remain connected to the served mobile subscriber). The maximum number of remote parties is 5. 1.2.1.1 Indicati
32、on about multiParty status Notification shall be sent towards the served mobile subscriber and all the remote parties in a multiParty call at the invocation of this Supplementary Service. In addition, a notification shall always be sent towards all remote parties (i.e. not towards the served mobile
33、subscriber) every time a new party is added to the multiParty call. Notifications shall also be sent to remote parties when they are put on hold and when they are retrieved in accordance with normal Call Hold procedures. In the case where a previously private communication is added again to the mult
34、iParty call, a notification shall be sent towards all remote parties. NOTE: During an interim period of time, some networks might not support the sending of the notifications to the remote parties. 1.2.2 Applicability to telecommunication services The applicability of this Supplementary Service is d
35、efined in TS 22.004. 1.2.3 Terminology Served Mobile Subscriber During the invocation and active phase, the service is under the control of the served mobile subscriber, i.e. the one who has subscribed to the service. Remote Party Any participant in the multiParty call who is not the served mobile s
36、ubscriber. 1.3 Normal procedures with successful outcome 1.3.1 Provision This Supplementary Service is provisioned for all Basic Services (BS) subscribed to and to which it is applicable, i.e. not to any subset of these BS. The provision of the Call Hold Supplementary Service is also required. 1.3.2
37、 Withdrawal Withdrawal of the service is made by the service provider upon request by the subscriber or for service provider reasons. 1.3.5 Activation The Supplementary Service shall be activated by the service provider as a result of provision. 1.3.6 Deactivation The Supplementary Service shall be
38、deactivated by the service provider as a result of withdrawal. ETSI ETSI TS 122 084 V13.0.0 (2016-01)73GPP TS 22.084 version 13.0.0 Release 131.3.7 Invocation Multi-Party service will be invoked by the served mobile subscriber by use of a control procedure, as defined in TS 22.030. 1.3.8 Normal oper
39、ation with successful outcome Only the served mobile subscriber shall be able to add remote parties to the multiParty call. 1.3.8.1 Beginning the multiParty call When the served mobile subscriber invokes multiParty service from the precondition defined in Section 1.2.1, the network joins the active
40、call and the call on hold together into a multiParty call in which the served mobile subscriber and the remote parties can all communicate with one another. 1.3.8.2 Managing an active multiParty call During an active multiParty call, the served mobile subscriber shall be able to: (i) Add another rem
41、ote party, to which a private communication has been established using the same procedures as in Section 1.3.8.1, if the number of remote parties does not then exceed the maximum number allowed, which results in an active multiParty call. A “MPTY invoke“ notification shall be sent towards all remote
42、 parties. A Retrieve notification (according to TS 22.083) shall be sent towards all previously held remote parties. (ii) Put the connection to multiParty call on hold, i.e. place her connection to the multiParty call on hold (and typically later retrieve it). The served mobile subscriber may make a
43、n enquiry call (e.g. to a potential new remote party) or process a Call Waiting request from this state. While the multiParty call is on hold the remaining remote parties in the multiParty call can have communication with each other. As a result of this scenario, the enquiry call or the accepted wai
44、ting call can be added to the multiParty call or released. If the call is released by the served mobile subscriber or by the remote party, the served mobile subscriber is in control of a held multiParty call. A Hold notification (according to TS 22.083) shall be sent towards all remote parties. (iii
45、) Separate a remote party: Explicitly choose one remote party to have a private communication with. This results in that remote party being removed from the multiParty call which is placed on hold, and the conversation between the served mobile subscriber and the designated remote party being a norm
46、al active call (see NOTE 1). The remaining remote parties may have communication with each other in this state. As a result of this scenario the private communication can be added again to the multiParty call or released. If the private call is released by the served mobile subscriber or by the remo
47、te party, the served mobile subscriber is in control of a held multiParty call. A Hold notification (according to TS 22.083) shall be sent towards all remote parties, except the designated remote party to which a private communication was established. (iv) Terminate the entire multiParty call. When
48、the served mobile subscriber releases, this is interpreted as a request for termination of the entire multiParty call even if there are calls on hold. No further notification shall be sent. (v) Disconnect a remote party: Explicitly release the remote parties on a one at a time basis (see NOTE 1). In
49、 the case when no remote parties remain, the multiParty call is terminated. ETSI ETSI TS 122 084 V13.0.0 (2016-01)83GPP TS 22.084 version 13.0.0 Release 13NOTE 1: If the served mobile subscriber has a private communication with one of the remote parties and this remote party disconnects or is disconnected a notification is sent towards the served mobile subscriber that she has a multiParty call on hold. The notification about the held multiparty call towards the served mobile subscriber is given by the MS, not by the network. 1.3.8.3 Managing a held multiParty
