1、 ETSI TS 1Universal Mobile TelIsolated EvoRadio Access Network (3GPP TS 22.3TECHNICAL SPECIFICATION122 346 V13.0.0 (2016elecommunications System (LTE; lved Universal Terrestrial k (E-UTRAN) operation for pubStage 1 .346 version 13.0.0 Release 1316-03) (UMTS); ublic safety; 13) ETSI ETSI TS 122 346 V
2、13.0.0 (2016-03)13GPP TS 22.346 version 13.0.0 Release 13Reference DTS/TSGS-0122346vd00 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sou
3、s-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall
4、not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Sec
5、retariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please s
6、end your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permissi
7、on of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the E
8、TSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 122 346
9、 V13.0.0 (2016-03)23GPP TS 22.346 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members,
10、and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to t
11、he ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Fo
12、reword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the c
13、orresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “
14、cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 346 V13.0.0 (2016-03)33GPP TS 22.346 version 13.0.0 Re
15、lease 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Overview 6g34.1 Service description . 6g35 Service requirements 7g35.1 General requireme
16、nts . 7g35.2 Subscriber and service management requirements . 7g35.2.1 Introduction (informative) 7g35.2.2 Requirements 7g35.2.3 Interoperability with MCPTT . 8g35.3 Requirements for initiation of Isolated E-UTRAN operation 8g35.3.1 Introduction (informative) 8g35.3.2 Requirements 8g35.4 Requirement
17、s for ongoing Isolated E-UTRAN operation 9g35.4.1 Introduction (informative) 9g35.4.2 Requirements 9g35.5 Requirements for termination of an Isolated E-UTRAN 10g35.5.1 Introduction (informative) 10g35.5.2 Requirements 10g35.6 Requirements for security aspects of Isolated E-UTRAN operation 10g35.6.1
18、Introduction (informative) 10g35.6.2 Requirements 10g3Annex A (informative): Change history . 12g3History 13g3ETSI ETSI TS 122 346 V13.0.0 (2016-03)43GPP TS 22.346 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The co
19、ntents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as fol
20、lows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. Y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc
21、. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 346 V13.0.0 (2016-03)53GPP TS 22.346 version 13.0.0 Release 131 Scope The present document specifies the service requirements for Isolated E-UTRAN Operation in support of mission c
22、ritical network operation for Public Safety. In particular, requirements are specified for: - Initiation of Isolated E-UTRAN operation. - Ongoing Isolated E-UTRAN operation. - Termination of Isolated E-UTRAN operation. - Security aspects of Isolated E-UTRAN operation. 2 References The following docu
23、ments contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. -
24、For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Sp
25、ecifications“. 2 3GPP TS 22.101: “Services aspects; Service principles“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the
26、definition of the same term, if any, in TR 21.905 1. Isolated E-UTRAN: either an E-UTRAN without normal connectivity with the EPC or deployed NeNBs with E-UTRAN functionality. Isolated E-UTRAN operation: Comprises two situations: 1) In the event of an interruption to normal backhaul connectivity Iso
27、lated E-UTRAN operation aims to adapt to the failure and maintain an acceptable level of network operation in the Isolated E-UTRAN. The restoration of service is the eventual goal. 2) Operation following the deployment of one or more Nomadic eNBs either without backhaul or with limited backhaul. Lim
28、ited backhaul capability: Isolated E-UTRAN operation supports operation where the Isolated E-UTRAN has no backhaul capability to the EPC. Furthermore Isolated E-UTRAN operation may have limited backhaul capability to the EPC. For the case of limited backhaul capability to the EPC only the signalling
29、 of public safety Ues can reliably be communicated to the EPC; in addition users may have the possibility to transmit a limited amount of user data with no guarantee of service. Nomadic eNB (NeNB): An NeNB is a nomadic cell and may consist: base station, antennas, microwave backhaul and support for
30、local services. The NeNB is intended for Public Safety use providing coverage or additional capacity where: 1) coverage was never present (e.g. forest fire or underground rescue) or 2) where, for example, due to natural disaster coverage is no longer present. ETSI ETSI TS 122 346 V13.0.0 (2016-03)63
31、GPP TS 22.346 version 13.0.0 Release 133.2 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. Ne
32、NB Nomadic eNB 4 Overview 4.1 Service description Ensuring the continued ability of Public Safety users to communicate within mission critical situations is of the utmost importance. The Isolated E-UTRAN mode of operation provides the ability to maintain a level of communications for Public Safety u
33、sers, via an eNB (or set of connected eNBs), following the loss of backhaul communications. The Isolated E-UTRAN mode of operation also provides the ability to create a serving radio access network without backhaul communications, from a deployment of one or more standalone Nomadic eNBs (NeNBs). In
34、addition the Isolated EUTRAN feature also addresses the scenario where a fixed or nomadic set of eNBs is without normal backhaul communications but has been provided with an alternative (non-ideal) limited bandwidth backhaul. An Isolated E-UTRAN may comprise a deployment of one or more NeNBs. In thi
35、s case operator control would initiate Isolated E-UTRAN operation for a group of NeNBs in a given incident area. An Isolated E-UTRAN derived from NeNBs exhibits similar behaviour to an Isolated E-UTRAN derived from eNBs including: support for Public Safety Ues in the coverage area, communication bet
36、ween NeNBs and support for limited backhaul connectivity. The Isolated E-UTRAN may comprise a single or multiple eNBs, a single or multiple NeNBs, or a mixed group of eNBs and NeNBs. An Isolated E-UTRAN comprising multiple (N)eNBs, with connections between the (N)eNBs, can provide communication betw
37、een Ues across a wider area of coverage than can be provided by a single isolated (N)eNB. The Ues in the coverage of the Isolated E-UTRAN are able to continue communicating and provide a restricted set of services supporting voice, data and group communications, to their Public Safety users. An Isol
38、ated E-UTRAN is characterized by having no, or a limited, backhaul connection. In particular, the Isolated E-UTRAN feature enables services to be provided to Public Safety Ues in the following backhaul scenarios (see also Table 4.1-1): - No backhaul; - Limited bandwidth signalling only backhaul; - L
39、imited bandwidth signalling and user data backhaul. Table 4.1-1: Isolated E-UTRAN scenarios IOPS Scenario Signalling backhaul status User Data backhaul status Comment No backhaul Absent Absent Fully Isolated E-UTRAN operation using local routing of UE-UE data traffic and possible support for access
40、to the public internet via a local gateway Signalling only backhaul Limited Absent User data traffic offload at the E-UTRAN using local routing of UE-UE data traffic and possible support for access to the public internet via a local gateway Limited backhaul Limited Limited Selective user data traffi
41、c offload at the E-UTRAN using local routing of UE-UE data traffic and possible support for access to the public internet via a local gateway Normal backhaul Normal Normal Normal EPC connected operation ETSI ETSI TS 122 346 V13.0.0 (2016-03)73GPP TS 22.346 version 13.0.0 Release 135 Service requirem
42、ents 5.1 General requirements Isolated E-UTRAN operation shall not impact either GSM or UMTS. The use of Isolated E-UTRAN operation shall be authorized by the operator. The network controls the use of E-UTRAN resources used for Isolated E-UTRAN operation. When a Public Safety UE communicates within
43、the Isolated E-UTRAN, the PLMN operator shall be able to collect accounting data for this communication. 5.2 Subscriber and service management requirements 5.2.1 Introduction (informative) In order to provide efficient Isolated E-UTRAN operation it is necessary that eNBs (and NeNBs) capable of formi
44、ng and joining an Isolated E-UTRAN are able to support certain functions locally thereby providing services of importance to the Public Safety community. 5.2.2 Requirements Public Safety Ues served only by an Isolated E-UTRAN will not possess user plane connectivity to an external IP network due to
45、the absence of backhaul connectivity to the Mobile Operator Network. The Isolated E-UTRAN may support Selected IP Traffic Offload at the Local Network, compatible with the service principles defined in 2, in order to provide connectivity to external IP networks (e.g. internet) when a backhaul connec
46、tion (limited or otherwise) is present. The Isolated E-UTRAN shall be able to make use of a limited backhaul connection to exchange control plane signalling with the EPC. The Isolated E-UTRAN may use the limited backhaul connection to exchange user plane data with the EPC. NOTE: There is no quality
47、of service expectations for user plane data. The Isolated E-UTRAN shall support mobility for Public Safety Ues between the eNBs comprising the Isolated E-UTRAN. The Isolated E-UTRAN shall be able to establish local routing and ProSe Group Communication for the Public Safety Ues in coverage of the Is
48、olated E-UTRAN. The Isolated E-UTRAN shall be able to provide voice and data communications services to all Public Safety Ues and groups under the coverage of the Isolated E-UTRAN. The Isolated E-UTRAN shall allow Public Safety Ues under its coverage to initiate and maintain voice and data communica
49、tions with other Public Safety Ues and groups under the coverage of the Isolated E-UTRAN. The Isolated E-UTRAN shall be capable of informing served Public Safety Ues about which other Public Safety Ues the Isolated E-UTRAN is serving. The Isolated E-UTRAN shall support restrictions upon the provision of this information according to security policy. NOTE: For example, information on users within a served users organization could be sent to that served user, and information on users could be provided to other users within the same group. Lists of served users
