ETSI TS 123 012-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Location management procedures (V14 0 0 3GPP .pdf

上传人:tireattitude366 文档编号:740641 上传时间:2019-01-11 格式:PDF 页数:71 大小:323.97KB
下载 相关 举报
ETSI TS 123 012-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Location management procedures (V14 0 0 3GPP .pdf_第1页
第1页 / 共71页
ETSI TS 123 012-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Location management procedures (V14 0 0 3GPP .pdf_第2页
第2页 / 共71页
ETSI TS 123 012-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Location management procedures (V14 0 0 3GPP .pdf_第3页
第3页 / 共71页
ETSI TS 123 012-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Location management procedures (V14 0 0 3GPP .pdf_第4页
第4页 / 共71页
ETSI TS 123 012-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Location management procedures (V14 0 0 3GPP .pdf_第5页
第5页 / 共71页
点击查看更多>>
资源描述

1、 ETSI TS 123 012 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Location management procedures (3GPP TS 23.012 version 14.0.0 Release 14) floppy3TECHNICAL SPECIFICATION ETSI ETSI TS 123 012 V14.0.0 (2017-03)13GPP

2、 TS 23.012 version 14.0.0 Release 14Reference RTS/TSGC-0423012ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture

3、de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modif

4、ied without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Us

5、ers of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please sen

6、d your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission

7、 of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETS

8、I logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 123 012 V

9、14.0.0 (2017-03)23GPP TS 23.012 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, an

10、d can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the

11、 ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Fore

12、word The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be fo

13、und under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the

14、 expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 123 012 V14.0.0 (2017-03)33GPP TS 23.012 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31

15、 Scope 6g31.1 References 6g31.2 Abbreviations . 7g32 Definitions 7g32.1 Location management 7g32.2 Location area and MSC area 8g32.3 Location area identification 8g32.4 IMSI detach/attach operation . 8g32.4.1 Explicit IMSI detach/attach 8g32.4.2 Implicit IMSI detach . 8g32.5 Use of the term mobile s

16、tation (MS) in the present document . 8g32.6 Paging area . 8g33 General procedures in the network related to Location Management 9g33.1 Procedures in the MSC related to Location Updating 9g33.2 Procedures in the VLR related to Location Updating 9g33.3 Procedures in the HLR related to Location Updati

17、ng 9g33.4 Normal Location Updating and IMSI detach/attach operation . 9g33.5 IMSI enquiry procedure . 9g33.6 Information transfer between Visitor and Home Location Registers . 9g33.6.1 Procedures for location management 9g33.6.1.1 Location updating procedure . 9g33.6.1.2 Downloading of subscriber pa

18、rameters to the VLR 9g33.6.1.3 Location cancellation procedure . 10g33.6.1.4 Mobile subscriber purging procedure 10g33.6.1.5 Support for subscription without MSISDN . 10g33.7 Overload Protection 11g33.7.1 Overview 11g33.7.2 Congestion Control during Mobility Management . 11g33.7.3 Extended periodic

19、LAU Signalling 11g33.8 Information transfer between VLR and CSG Subscriber Server 12g33.8.1 Procedures for location management 12g33.8.1.1 General 12g33.8.1.2 Updating VCSG Location procedure 12g33.8.1.3 Downloading of VPLMN CSG subscription data to the VLR 12g33.8.1.4 VCSG Location cancellation pro

20、cedure 12g34 Detailed Procedures in the network related to Location Management . 12g34.1 Location Updating 12g34.1.1 Detailed procedure in the MSC. 12g34.1.1.1 Process Update_Location_Area_MSC 12g34.1.1.2 Procedure Authenticate_MSC . 16g34.1.2 Detailed procedure in the VLR . 17g34.1.2.1 Process Upda

21、te_Location_Area_VLR 17g34.1.2.1a Procedure Retrieve_IMEISV_If_Required . 22g34.1.2.2 Procedure Authenticate_VLR . 23g34.1.2.3 Procedure Location_Update_Completion_VLR . 25g34.1.2.4 Procedure Update_HLR_VLR 30g34.1.2.5 Procedure Insert_Subs_Data_VLR . 32g34.1.2.6 Procedure Activate_Tracing_VLR 33g34

22、.1.2.7 Process Send_Identification_PVLR 34g34.1.2.8 Process Trace_Subscriber_Activity_VLR 36g3ETSI ETSI TS 123 012 V14.0.0 (2017-03)43GPP TS 23.012 version 14.0.0 Release 144.1.2.9 Procedure Perform Relaying . 36g34.1.2.10 Procedure Update_VCSG_Location_VLR . 37g34.1.2.11 Procedure Insert_VCSG_Subs_

23、Data_VLR . 39g34.1.3 Detailed procedure in the HLR . 41g34.1.3.1 Process Update_Location_HLR 41g34.1.3.2 Procedure Insert_Subscriber_Data_HLR 45g34.1.3.3 Process Subscriber_Present_HLR . 47g34.1.3.4 Procedure Control_Tracing_HLR . 48g34.1.4 Detailed procedure in the CSS 48g34.1.4.1 Process Update_VC

24、SG_Location_CSS 48g34.1.4.2 Procedure Insert_VCSG_Subs_Data_CSS 49g34.2 Location Cancellation . 53g34.2.1 Detailed procedure in the VLR . 53g34.2.1.1 Process Cancel_Location_VLR 53g34.2.2 Detailed procedure in the HLR . 56g34.2.2.1 Process Cancel_Location_HLR 56g34.2A VCSG Location Cancellation . 58

25、g34.2A.1 Detailed procedure in the VLR . 58g34.2A.1.1 Process Cancel_VCSG Location_VLR . 58g34.2A.2 Detailed procedure in the CSS 60g34.2A.2.1 Process Cancel_VCSG Location . 60g34.3 Detach IMSI . 61g34.3.1 Detailed procedure in the MSC. 61g34.3.1.1 Process Detach_IMSI_MSC . 61g34.3.2 Detailed proced

26、ure in the VLR . 62g34.3.2.1 Process Detach_IMSI_VLR 62g34.4 Purge MS 64g34.4.1 Detailed procedure in the VLR . 64g34.4.1.1 Procedure Purge_MS_VLR 64g34.4.2 Detailed procedure in the HLR . 66g34.4.2.1 Process Purge_MS_HLR 66g3Annex A (informative): Change history . 68g3History 70g3ETSI ETSI TS 123 0

27、12 V14.0.0 (2017-03)53GPP TS 23.012 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document defines the location management procedures within the 3GPP system. The contents of the present document ar

28、e subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the

29、first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremente

30、d when editorial only changes have been incorporated in the document. ETSI ETSI TS 123 012 V14.0.0 (2017-03)63GPP TS 23.012 version 14.0.0 Release 141 Scope The present document describes the location management procedures for the circuit switched domain, with respect to the application level functi

31、onal behaviour. This is to be distinguished from the corresponding protocol handling behaviour, which is specified in 3GPP TS 29.002 8. The following location management procedures are included: - location updating; - location cancellation; - MS purging; - IMSI attach/detach. The procedures in the M

32、obile Station (MS) are described in 3GPP TS 23.022 6. The procedures between MSC, VLR and HLR utilise the Mobile Application Part (MAP) and details concerning the protocol handling are contained in 3GPP TS 29.002 8. The present document excludes location management procedures for the packet switched

33、 domain, which are covered in 3GPP TS 23.060 20. The descriptions herein depict a logical separation between the MSC and VLR. This logical separation, as well as the messages transferred between the two logical entities are the basis of a model used to define the externally visible behaviour of the

34、MSC/VLR, which a may be a single physical entity. They do not impose any requirement except the definition of the externally visible behaviour. 1.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References

35、 are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM do

36、cument), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “3G Vocabulary“. 2 3GPP TS 23.002: “Network architecture“. 3 3GPP TS 23.003: “Numbering, addressing and identification“. 4 3GPP TS 23.007: “Restor

37、ation procedures“. 5 3GPP TS 23.008: “Organization of subscriber data“. 5a 3GPP TS 23.018: “Basic call handling; Technical realization“. 6 3GPP TS 23.022: “Functions related to Mobile Station (MS) in idle mode“. 7 3GPP TS 23.116: “Super-Charger Technical Realisation; Stage 2“. 8 3GPP TS 29.002: “Mob

38、ile Application Part (MAP) specification“. 9 3GPP TS 29.007: “General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)“. 10 3GPP TS 43.020: “Security related network functions“. E

39、TSI ETSI TS 123 012 V14.0.0 (2017-03)73GPP TS 23.012 version 14.0.0 Release 1411 3GPP TS 23.078: “ Customised Applications for Mobile network Enhanced Logic (CAMEL) Phase 4 stage2“. 11a 3GPP TS 23.195: “Provision of UE Specific Behaviour Information to Network Entities“. 12 3GPP TS 23.236: “Intra Do

40、main Connection of RAN Nodes to Multiple CN Nodes“. 13 3GPP TS 24.008: “Mobile Radio Interface Layer 3 specification; Core Network Protocols - Stage 3“. 14 3GPP TS 29.010: “Information element mapping between Mobile Station - Base Station System and BSS - Mobile-services Switching Centre (MS - BSS -

41、 MSC) Signalling procedures and the Mobile Application Part (MAP)“. 15 3GPP TS 32.422: “Subscriber and equipment trace: Trace control and configuration management“. 16 3GPP TS 32.421: “Subscriber and equipment trace: Trace concepts and requirements“. 17 3GPP TS 25.413: “UTRAN Iu interface RANAP sign

42、alling“. 18 3GPP TR 29.994: “Recommended infrastructure measures to overcome specific Mobile Station (MS) faults“. 19 3GPP TS 24.368: “Non-Access Stratum (NAS) configuration Management Object (MO)“. 20 3GPP TS 23.060: “General Packet Radio Service (GPRS); Service description; Stage 2“. 1.2 Abbreviat

43、ions Abbreviations are listed in 3GPP TR 21.905 1. In addition, for the purposes of the present document, the following abbreviations apply: ADD Automatic Device Detection CSG Closed Subscriber Group CSS CSG Subscriber Server PUESBINE Provision of User Equipment Specific Behaviour Information to Net

44、work Entities UESBI-Iu User Equipment Specific Behaviour Information over the Iu interface 2 Definitions 2.1 Location management Location management means that the PLMNs keep track of where the MSs are located in the system area. The location information for each MS is stored in functional units cal

45、led location registers. Functionally, there are two types of location registers: - the Home Location Register where all subscriber parameters of an MS are permanently stored, and where the current location may be stored; - the Visitor Location Register where all relevant data concerning an MS are st

46、ored as long as the station is within the area controlled by that visitor location register; - the CSG Subscriber Server where the CSG subscription data are stored in the visited PLMN for inbound roaming MS, and where the current location may be stored. See also 3GPP TS 23.002 2 where the network ar

47、chitecture is described, and 3GPP TS 23.008 5 where the data stored in the location registers are described. The action taken by a MS in order to provide location information to the PLMN will be referred to as location updating. ETSI ETSI TS 123 012 V14.0.0 (2017-03)83GPP TS 23.012 version 14.0.0 Re

48、lease 142.2 Location area and MSC area The MSC area is composed of the area covered by all base stations controlled by the MSC. An MSC area may consist of several location areas. A location area is an area in which, after having performed a location update once, MSs may roam without being required t

49、o perform subsequent location updates for reason of location change. A location area consists of one or more cells. For further details of the network architecture, see 3GPP TS 23.002 2. 2.3 Location area identification The Location Area Identification (LAI) plan is part of the base station identification plan. The base stations are identified uniquely (see 3GPP TS 23.003 3). 2.4 IMSI detach/attach operation The support of IMSI detach/attach operation is mandatory in MSs. The facility is optional in the fixed inf

展开阅读全文
相关资源
猜你喜欢
  • BS EN 4800-003-2010 Aerospace series Titanium and titanium alloys Technical specification Tube《航空航天系列 钛和钛合金 技术规范 管》.pdf BS EN 4800-003-2010 Aerospace series Titanium and titanium alloys Technical specification Tube《航空航天系列 钛和钛合金 技术规范 管》.pdf
  • BS EN 4800-004-2010 Aerospace series Titanium and titanium alloys Technical specification Wire《航空航天系列 钛和钛合金 技术规范 金属线》.pdf BS EN 4800-004-2010 Aerospace series Titanium and titanium alloys Technical specification Wire《航空航天系列 钛和钛合金 技术规范 金属线》.pdf
  • BS EN 4800-005-2010 Aerospace series Titanium and titanium alloys Technical specification Forging stock《航空航天系列 钛和钛合金 技术规范 锻坯》.pdf BS EN 4800-005-2010 Aerospace series Titanium and titanium alloys Technical specification Forging stock《航空航天系列 钛和钛合金 技术规范 锻坯》.pdf
  • BS EN 4800-006-2010 Aerospace series Titanium and titanium alloys Technical specification Pre-production and production forgings《航空航天系列 钛和钛合金 技术规范 前期制作和生产锻件》.pdf BS EN 4800-006-2010 Aerospace series Titanium and titanium alloys Technical specification Pre-production and production forgings《航空航天系列 钛和钛合金 技术规范 前期制作和生产锻件》.pdf
  • BS EN 4800-007-2010 Aerospace series Titanium and titanium alloys Remelting stock《航空航天系列 钛和钛合金 技术规范 再熔料》.pdf BS EN 4800-007-2010 Aerospace series Titanium and titanium alloys Remelting stock《航空航天系列 钛和钛合金 技术规范 再熔料》.pdf
  • BS EN 4800-008-2010 Aerospace series Titanium and titanium alloys Technical specification Pre-production and production castings《航空航天系列 钛和钛合金 技术规范 前期制作和生产铸件》.pdf BS EN 4800-008-2010 Aerospace series Titanium and titanium alloys Technical specification Pre-production and production castings《航空航天系列 钛和钛合金 技术规范 前期制作和生产铸件》.pdf
  • BS EN 4801-2017 Aerospace series Flange couplings Swivel flange with 3 fastening holes in heat resisting steel Inch series《航空航天系列 凸缘联轴节 3个紧固孔的耐热钢转节法兰 英制系列》.pdf BS EN 4801-2017 Aerospace series Flange couplings Swivel flange with 3 fastening holes in heat resisting steel Inch series《航空航天系列 凸缘联轴节 3个紧固孔的耐热钢转节法兰 英制系列》.pdf
  • BS EN 4802-2017 Aerospace series Flange couplings Swivel flange with 3 fastening holes in nickel alloy Inch series《航空航天系列 凸缘联轴节 3个紧固孔的镍合金转节法兰 英制系列》.pdf BS EN 4802-2017 Aerospace series Flange couplings Swivel flange with 3 fastening holes in nickel alloy Inch series《航空航天系列 凸缘联轴节 3个紧固孔的镍合金转节法兰 英制系列》.pdf
  • BS EN 4803-2017 Aerospace series Flange couplings Swivel flange with 4 fastening holes in heat resisting steel Inch series《航空航天系列 凸缘联轴节 4个紧固孔的耐热钢转节法兰 英制系列》.pdf BS EN 4803-2017 Aerospace series Flange couplings Swivel flange with 4 fastening holes in heat resisting steel Inch series《航空航天系列 凸缘联轴节 4个紧固孔的耐热钢转节法兰 英制系列》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1