1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelCall Waiting supp(3GPP TS 23.0floppy3TECHNICAL SPECIFICATION123 083 V13.0.0 (2016communications system (Phaelecommunications System (g (CW) and Call Hold (HOLD)p lementary services; Stage 2 .083 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16
2、-01) hase 2+); (UMTS); D) 13) TEM FOR ICATIONSRETSI ETSI TS 123 083 V13.0.0 (2016-01)13GPP TS 23.083 version 13.0.0 Release 13Reference RTS/TSGC-0423083vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 34
3、8 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The cont
4、ent of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Docu
5、ment Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org
6、/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, inc
7、luding photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards
8、 Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Tra
9、de Marks registered and owned by the GSM Association. ETSI ETSI TS 123 083 V13.0.0 (2016-01)23GPP TS 23.083 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essent
10、ial IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates
11、are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server)
12、which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities o
13、r GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“,
14、“should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citatio
15、n. ETSI ETSI TS 123 083 V13.0.0 (2016-01)33GPP TS 23.083 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g30 Scope 5g30.1 References 5g30.2 Abbreviations . 5g31 Call waiting (CW) 6g31.1 Handling of call waiting . 6g31.1.1 Activat
16、ion . 6g31.1.2 Deactivation 6g31.1.3 Interrogation . 7g31.2 Functions and information flows 7g31.3 Information stored in the HLR . 26g31.4 State transition model . 26g31.5 Transfer of information from HLR to VLR 27g31.6 Information stored in the VLR . 27g31.7 Handover 27g32 Call hold (HOLD) 27g32.1
17、Functions and information flows 27g32.2 Information stored in the HLR . 36g32.3 State transition model . 37g32.4 Transfer of information from HLR to VLR 37g32.5 Information stored in the VLR . 37g32.6 Handover 37g3Annex A: Change history 38g3History 39g3ETSI ETSI TS 123 083 V13.0.0 (2016-01)43GPP TS
18、 23.083 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the content
19、s of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved docum
20、ent under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 123 083 V13.0.0 (2016-01)53GPP TS 23.083
21、 version 13.0.0 Release 130 Scope The present document gives the stage 2 description of the call completion supplementary services. The group of call completion supplementary services is divided into the following two supplementary services: - Call waiting (CW) (clause 1); - Call hold (HOLD) (clause
22、 2). 0.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, sub
23、sequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR
24、 21.905: “3G Vocabulary“. 2 3GPP TS 22.082: “Call Forwarding (CF) Supplementary Services - Stage 1“. 3 3GPP TS 23.011: “Technical realization of supplementary services - General Aspects“. 4 3GPP TS 24.008: “Mobile radio interface layer 3 specification; Core Network Protocols - Stage3“. 5 3GPP TS 23.
25、018: Basic call handling. 6 3GPP TS 23.078: “Customized Applications for Mobile network Enhanced Logic (CAMEL) - Phase 3; Stage 2“. 7 3GPP TS 23.135: “Multicall supplementary service; Technical Realisation; Stage 2“. 8 3GPP TS 23.087: “User-to-User Signalling (UUS) - Stage 2“. 9 3GPP TS 23.093: “Tec
26、hnical realisation of Completion of Calls to Busy Subscriber (CCBS) - Stage 2“. 10 3GPP TS 23.072: “Call Deflection (CD) supplementary service - Stage2“. 11 3GPP TS 29.007: “General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network
27、 (ISDN) or Public Switched Telephone Network (PSTN)“. 0.2 Abbreviations In addition to those below, abbreviations used in the present document are listed in 3GPP TR 21.905. HTI: HoldTreatment Indicator ETSI ETSI TS 123 083 V13.0.0 (2016-01)63GPP TS 23.083 version 13.0.0 Release 131 Call waiting (CW)
28、 1.1 Handling of call waiting 1.1.1 Activation The call waiting supplementary service is activated at the request of the user. The activation request indicates the basic services to which the activation request refers. The information flow for activation of call waiting is shown in figure 1.1. MS MS
29、C VLR HLR Activate CW Activate CW Activate CW Acknowledge Deactivate CW Deactivate CW Acknowledge Interrogate CW Acknowledge interrogation acknowledge info req set-up start timer T1 WAITING ACKNOWLEDGMENT WAITING ACKNOWLEDGMENT B being informed stop call-conf timer (user alerting, no answer) (recove
30、ry disconnect after time demand expiry) disconnect demand stop disconnect T2 or demand T3 disconnect ack disconnect demand stop T2 ordisconnect T3 demand disconnect ack CALL A-B HELD/CALL C-B ACTIVE CALL A-B HELD/CALL C-B WAITING or CALL A-B ACTIVE/CALL C-B WAITING subscriber B wants to terminate ac
31、tive or held call and connect waiting call disconnect demand (A-B) disconnect demand (A-B) CONTINUE A-B AS NORMAL CALL CLEARING connection demand (C-B) connection demand (C-B) stop CALL C-B ACTIVE NOTE 4: If T2 or if applicable T3 expires before reception of connection demand in the MSC then call c-
32、b shall be released with cause no reply and if it was T3 which expired the waiting call from C shall be forwarded on no reply. Figure 1.6 (sheet 4 of 7): Information flow for call waiting ETSI ETSI TS 123 083 V13.0.0 (2016-01)243GPP TS 23.083 version 13.0.0 Release 13TEa LEa TEc LEc VLR MSC MS CALL A-B HELD/CALL C-B WAITING or
