1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelExplicit Call Trans(3GPP TS 23.0floppy3TECHNICAL SPECIFICATION123 091 V13.0.0 (2016communications system (Phaelecommunications System (nsfer (ECT) supplementary serStage 2 .091 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); (UM
2、TS); service; 13) TEM FOR ICATIONSRETSI ETSI TS 123 091 V13.0.0 (2016-01)13GPP TS 23.091 version 13.0.0 Release 13Reference RTS/TSGC-0423091vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00
3、017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any e
4、lectronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format
5、(PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/s
6、tatus.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photo
7、copying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2
8、016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks reg
9、istered and owned by the GSM Association. ETSI ETSI TS 123 091 V13.0.0 (2016-01)23GPP TS 23.091 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if
10、 any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are availabl
11、e on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, o
12、r may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identi
13、ties. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “s
14、hould not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI
15、 TS 123 091 V13.0.0 (2016-01)33GPP TS 23.091 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Explicit Call Transfer (EC
16、T) 6g34.1 Functions 6g34.2 SDL diagrams and information flows 8g34.2.1 General description . 8g34.2.2 ECT (both calls answered) 8g34.2.3 ECT (one call answered, the other alerting) . 11g34.3 Interaction with other supplementary services . 14g34.3.1 Line Identification services . 14g34.3.2 Call Forwa
17、rding Unconditional (CFU) . 16g34.3.3 Call Forwarding on mobile subscriber Busy (CFB) . 17g34.3.3.1 Call Forwarding on mobile subscriber Busy due to Network Determined User Busy (NDUB) . 17g34.3.3.2 Call Forwarding on mobile subscriber Busy due to User Determined User Busy (UDUB) . 17g34.3.4 Call Fo
18、rwarding on No Reply (CFNRy) . 18g34.3.5 Call Forwarding on mobile subscriber Not Reachable (CFNRc) 18g34.3.6 Call Waiting (CW) 18g34.3.7 Call Hold (HOLD) 18g34.3.8 Multi Party (MPTY) . 18g34.3.9 Closed User Group (CUG) . 18g34.3.10 Advice of Charge (AoC) services . 19g34.3.11 Call Barring services
19、. 19g34.3.12 Explicit Call Transfer (ECT) 19g34.4 Information stored in the HLR . 19g34.5 State transition model . 19g34.6 Transfer of information from the HLR to the VLR 20g34.7 Information stored in the VLR . 20g34.8 Handover 20g3Annex A: Change history 21g3History 22g3ETSI ETSI TS 123 091 V13.0.0
20、 (2016-01)43GPP TS 23.091 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG
21、modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates
22、TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 123 091 V13.0.0 (2016-
23、01)53GPP TS 23.091 version 13.0.0 Release 131 Scope The present document gives the stage 2 description of the call transfer supplementary services. Only one call transfer supplementary service has been defined, this is the Explicit Call Transfer (ECT) supplementary service, and is described in the p
24、resent document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific refe
25、rence, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document.
26、 1 3GPP TR 21.905: “3G Vocabulary“. 2 3GPP TS 23.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 2“. 3 3GPP TS 24.008: “Mobile Radio Interface Layer 3 specification; Core Network Protocols - Stage 3“. 4 EN 300 368: “Integrated Services Digital network (ISDN); Explicit Cal
27、l Transfer (ECT) supplementary service; Functional capabilities and information flows“. 5 EN 300 356-14: “Integrated Services Digital network (ISDN); Signalling System No. 7; ISDN User Part (ISUP) version 3 for the international interface; Part 14: Explicit Call Transfer (ECT) supplementary service
28、“. 6 3GPP TS 23.011: Technical realization of Supplementary Services. 7 3GPP TS 23.018: Basic Call Handling. 3 Definitions and abbreviations 3.1 Definitions First call: One of the subscriber A calls (answered). Notification Indicator (NI): Indicates to each remote party in which state of the other r
29、emote party ECT was performed (active, alerting). Redirection Number (Rdn): Includes the presentation indicator and the directory number of the other remote party. Second call: The other subscriber A call (answered or alerting). Subscriber A (PARTY A): The served mobile subscriber - the one who has
30、subscribed to, and invokes the ECT Supplementary Service. Subscriber B (PARTY B): The other party in the subscriber A first call. Subscriber C (PARTY C): The other party in the subscriber A second call. Subscriber D (PARTY D): The forwarded-to party when the call is forwarded by the subscriber C. ET
31、SI ETSI TS 123 091 V13.0.0 (2016-01)63GPP TS 23.091 version 13.0.0 Release 13Transferred call: The resulting call after successful explicit call transfer between B and C. 3.2 Abbreviations In addition to those below, abbreviations used in the present document are listed in 3GPP TR 21.905 1. ECT: Exp
32、licit Call Transfer supplementary service LI: Line Identity NI: Notification Indicator Rdn: Redirection numberRdnB: Redirection number of party B RdnD: Redirection number of party D 4 Explicit Call Transfer (ECT) 4.1 Functions The following function has been identified for the explicit call transfer
33、 service: MAF027 Explicit Call Transfer related authorizations examination The ability of a PLMN component to determine the authorizations relating to explicit call transfer. See figure 1. Location: VLR ETSI ETSI TS 123 091 V13.0.0 (2016-01)73GPP TS 23.091 version 13.0.0 Release 13Figure 1: Explicit
34、 Call Transfer related authorizations examination (VLR) Process in the VLR to checkif ECT is provisioned.Process MAF027 391_1(1)Signals to/from the left areto/from the MSC.IdleCheck ECTsubscriptionECTprovisionedSS-CSIprovisioned?ECT markedin CSI?Indicator:=ECT_availableProcessECTIdleIndicator:=ECT_a
35、vailable+ SS-CSIIndicator:=ECT_not_availableYesYesNoYesNoNoETSI ETSI TS 123 091 V13.0.0 (2016-01)83GPP TS 23.091 version 13.0.0 Release 134.2 SDL diagrams and information flows 4.2.1 General description The procedures Handle_ECT_Active and Handle_ECT_Alerting show the behaviour of the service as per
36、ceived by the served mobile subscriber and by any of the other parties involved in the transfer. These procedures and the macro Check_ECT show the actions to be taken by the network and the information provided by the network to the users. The following states for the invocation of the ECT supplemen
37、tary service are defined: a) First Call (Active, Held), Second Call (Active, Idle); b) First Call (Active, Held), Second Call (Call Delivered, Idle). NOTE: The call state “call delivered“ means that an ALERTING message has been sent to the MS, but no ANSWER Message (ANM) has been received. In the in
38、formation flows it is assumed that the served subscriber is a mobile subscriber and that the other parties are mobile or fixed subscribers. Party A is the subscriber controlling the Explicit Call Transfer Call (served mobile subscriber). Party B is the first remote party called. Party C is the secon
39、d remote party called. The served party is disconnected by the generic disconnect/release procedure after a successful transfer request. The connection of the remote parties in a new call (transferred call) is located in the served subscriber“s MSC. The information flows in figures 4 and 7 show the
40、unsuccessful case (i.e. the check in the VLR or in the MSC fails). The information flows in figures 5 and 8 show the successful case. 4.2.2 ECT (both calls answered) The SDL for the procedure Handle_ECT_Active (Explicit Call Transfer - both calls have been answered) is shown in figure 2. The checks
41、of whether Explicit Call Transfer is barred or not are shown in figure 3. The corresponding information flows are given in figure 4 and figure 5. ETSI ETSI TS 123 091 V13.0.0 (2016-01)93GPP TS 23.091 version 13.0.0 Release 13Figure 2: Procedure Handle_ECT_Active Procedure in the originating MSC to h
42、andle an Explicit Call Transfer when the first call leg (A-B) is connected and on hold and the othercall leg (A-C) is connected and active.Procedure Handle_ECT_Active ECT_Ac(1)Signals to/from the left areto/from the MS;signals to/from the right areto/from all/any remote partiesunless stated otherwis
43、e.Check_ECTConnect bothcallsECTrejectTo the held partyRetrievenotificationResult:=FailTransfernotificationECT ackSS-CSIpresent?SS InvocationnotifyTo gsmSCFFor call legsA-B - receives and accepts a call from subscriber C (by putting B on Hold), table 4 applies to the information supplied to subscribe
44、r B. ETSI ETSI TS 123 091 V13.0.0 (2016-01)153GPP TS 23.091 version 13.0.0 Release 13Table 1: Mobile subscriber A was calling subscriber B, puts B on hold and calls subscriber C Call states COLR indication received from Information provided to C subscribers Bs network A-B Active Indicated “allowed“
45、At time of transfer: A-C Active / Alerting NI: “call transferred, active“ Rdn: PI = allowed, LI of B A-B Active Indicated “restricted“ At time of transfer: A-C Active / Alerting NI: “call transferred, active“ Rdn: PI = restricted (note 1) A-B Active No indication received At time of transfer: A-C Ac
46、tive / Alerting (e.g. interworking) NI: “call transferred, active“ Rdn: PI = not available Table 2: Mobile subscriber A was called by subscriber B, puts B on hold and calls subscriber C Call states CLIR indication received from Information provided to C subscribers Bs network A-B Active Indicated “a
47、llowed“ At time of transfer: A-C Active / Alerting NI: “call transferred, active“ Rdn: PI = allowed, LI of B A-B Active Indicated “restricted“ At time of transfer: A-C Active / Alerting NI: “call transferred, active“ Rdn: PI = restricted (note 1) A-B Active No indication received At time of transfer
48、: A-C Active / Alerting (e.g. interworking) NI: “call transferred, active“ Rdn: PI = not available NOTE 1: If the subscriber C has CLIP Override Category then the following information is carried in the Redirection number: PI = restricted, LI of B. ETSI ETSI TS 123 091 V13.0.0 (2016-01)163GPP TS 23.
49、091 version 13.0.0 Release 13Table 3: Mobile subscriber A puts the call to B on hold and calls subscriber C Call states COLR indication received from Information provided to B subscribers Cs network A-B Active Indicated “allowed“ At time of transfer: A-C Active NI: “call transferred, active“ Rdn: PI = allowed, LI of C A-B Active Indicated “restricted“ At time of transfer: A-C Active NI: “call transferred, active“ Rdn: PI = restricted (note 2) A-B Active No indication received At time of transfer: A-C Active (e.g. interworking) NI: “call transferr
