ETSI TS 123 096-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Name identification supplementary services Stage 2 (V13.pdf

上传人:刘芸 文档编号:740775 上传时间:2019-01-11 格式:PDF 页数:16 大小:138.97KB
下载 相关 举报
ETSI TS 123 096-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Name identification supplementary services Stage 2 (V13.pdf_第1页
第1页 / 共16页
ETSI TS 123 096-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Name identification supplementary services Stage 2 (V13.pdf_第2页
第2页 / 共16页
ETSI TS 123 096-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Name identification supplementary services Stage 2 (V13.pdf_第3页
第3页 / 共16页
ETSI TS 123 096-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Name identification supplementary services Stage 2 (V13.pdf_第4页
第4页 / 共16页
ETSI TS 123 096-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Name identification supplementary services Stage 2 (V13.pdf_第5页
第5页 / 共16页
点击查看更多>>
资源描述

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelName identifica(3GPP TS 23.0TECHNICAL SPECIFICATION123 096 V13.0.0 (2016communications system (Phaelecommunications System (ication supplementary serviceStage 2 .096 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); (UMTS); s; 13)

2、 TEM FOR ICATIONSRETSI ETSI TS 123 096 V13.0.0 (2016-01)13GPP TS 23.096 version 13.0.0 Release 13Reference RTS/TSGC-0423096vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C A

3、ssociation but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

4、print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kep

5、t on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you

6、find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and micro

7、film except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights r

8、eserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned

9、 by the GSM Association. ETSI ETSI TS 123 096 V13.0.0 (2016-01)23GPP TS 23.096 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly

10、 available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

11、 server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may

12、become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These shoul

13、d be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“

14、, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 123 096 V13.0

15、.0 (2016-01)33GPP TS 23.096 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and Abbreviations 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Calling Name Presentation (CNAP) . 6g34.1 Han

16、dling of calling name presentation . 6g34.1.1 Originating MSC Activities 6g34.1.2 Terminating VMSC Activities 6g34.1.3 Interrogation . 7g34.2 Functions and information flows 7g34.3 Information stored in the HLR . 12g34.4 State Transition Model . 12g34.5 Transfer of information from HLR to VLR 12g34.

17、6 Information stored in the VLR . 12g34.7 Handover 12g3Annex A (normative for PCS1900): Calling Name Information Setting to the MS . 13g3Annex B (informative): Change history . 14g3History 15g3ETSI ETSI TS 123 096 V13.0.0 (2016-01)43GPP TS 23.096 version 13.0.0 Release 13Foreword This Technical Spec

18、ification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The present document describes name identification supplementary services (stage 2) within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following fo

19、rmal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for

20、 approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. E

21、TSI ETSI TS 123 096 V13.0.0 (2016-01)53GPP TS 23.096 version 13.0.0 Release 131 Scope The present document gives the stage 2 description of the Name Identification Supplementary Services. The group of Name Identification Supplementary Services contains the following Supplementary Service: CNAP - Cal

22、ling name presentation (clause 4). 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. F

23、or a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the

24、 present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications “. 2 3GPP TS 22.004: “General on Supplementary Services“. 3 3GPP TS 23.011: “Technical Realization of Supplementary Services - General Aspects“. 4 3GPP TS 23.016: “Subscriber Data Management - Stage 2“. 5 3GPP TS 23.081: “Line

25、Identification Supplementary Services - Stage 2“. 3 Definitions and Abbreviations 3.1 Definitions Definition of name identity: The name identity is made up of the following information unit: - The name of the mobile subscriber for the purpose of calling name presentation - up to 80 characters of inf

26、ormation associated with a specific calling party. The calling name identity is the name identity of the calling party. Definition of Presentation Indicator: In addition to or instead of the name identity, the network may give a Presentation Indicator to the called mobile subscriber of the CNAP serv

27、ice. The following information may be given: - Presentation Indicator (PI) showing: a) presentation restricted, or b) name unavailable. Calling Name Information: ETSI ETSI TS 123 096 V13.0.0 (2016-01)63GPP TS 23.096 version 13.0.0 Release 13The calling name information of the calling party includes

28、either the calling name identity or an indication of privacy or unavailability. 3.2 Abbreviations In addition to the following abbreviations used in the present document, abbreviations are listed in 3GPP TR 21. 905 1. CNAP Calling Name Presentation. 4 Calling Name Presentation (CNAP) 4.1 Handling of

29、 calling name presentation 4.1.1 Originating MSC Activities The originating MSC may include calling name information in the Setup. 4.1.2 Terminating VMSC Activities The calling name identity shall be provided by the terminating VMSC to the MS. See Figure 3a/3b for details. The procedures of the name

30、 database query are outside the scope of the present document. The MSC shall determine the presentation indicator to be sent to the CNAP subscriber“s MS by combining the presentation indicator in the calling line information (if available), the presentation indicator in the calling name information

31、(if available) and the presentation indicator in the response from the name database (if applicable). The calling name shall be restricted if either the line or name indicator shows the information is to be restricted (and override category is not applicable). The precise handling depends on the str

32、ucture of the name database and is therefore outside the scope of the present document. An example is shown in annex A. If a name database query is not possible, e.g. calling line identity is unavailable, name database is not responding, or the name database response timer expires, then the MSC shal

33、l send a presentation indicator of name unavailable to the CNAP subscriber“s MS. A character translation may be required by the terminating MSC since the name characters stored in the name database are not using the GSM default alphabet (name characters passed to the CNAP subscriber“s MS use the GSM

34、 default alphabet). Display of calling name identity to the subscriber is outside the scope of the present document. ETSI ETSI TS 123 096 V13.0.0 (2016-01)73GPP TS 23.096 version 13.0.0 Release 134.1.3 Interrogation Status check The mobile subscriber can request the status of the supplementary servi

35、ce and be informed if the service is provided to him/her. This procedure is illustrated in figure 1. InterrogateCNAPInterrogateCNAPAcknowledgeReleaseCompleteMSMSC VLRFigure 1: Interrogation of Calling Name Presentation 4.2 Functions and information flows The following Mobile Additional Functions (MA

36、F) have been identified for the PLMN: MAF049 Determination of the calling name presentation subscription. The ability of a PLMN component to determine whether the supplementary service is provisioned for the mobile subscriber. See figure 3a. Location: VLR. MAF050 Determination of the calling party n

37、ame for offering to the called party. The ability of a PLMN component to determine and to forward the calling name identity and related indications to the called party. See figure 3b. Location: destination MSC. The information flow is shown in figure 4. ETSI ETSI TS 123 096 V13.0.0 (2016-01)83GPP TS

38、 23.096 version 13.0.0 Release 13IdleInitiateCNAPHandlingCNAPP ro vis io ne d ?calledsubscriberin H P L M Ncountry?yesnooverridecategory?yesnoset provisionindication =not provisionedContinueCallH a nd lingId lenoyesset provisionindication =provisionedset overridecategory = yesset overridecategory =

39、noFigure 2: MAF049 Determination of the calling name presentation subscription (VLR) ETSI ETSI TS 123 096 V13.0.0 (2016-01)93GPP TS 23.096 version 13.0.0 Release 13callingname informationavailable?y esnamepresentationrestricted?n oy espass P I =presentationrestrictedCN APoverridecategory?n oset PI =

40、presentationrestrictedfor Overridey esIdleInitiateCNAPHandlingCN APProvisioned?y esn on ocallingline identityavailable?*callingline identityrestricted?y esn on opass P I =nameunavailabley es* Calling line identity needed toperform the Name Database query.namecharactersexist?y espasscalling nameident

41、ityn oObtainCalling NameInform ationP I = P resentation Indicator1IdleU se N ame Charactersfrom the CallingName InformationP erform N ameDatabase Query(start timer)W ait_F or_N ame_Database_ResponseR eceive N ameDatabaseResponse2TimerExpiryFigure 3a: MAF050(CNAP) Determination of the information for

42、 offering to the called party (Sheet 1) Obtain info from database Obtain info from signalling ETSI ETSI TS 123 096 V13.0.0 (2016-01)103GPP TS 23.096 version 13.0.0 Release 13Nameunavailable?pass calling name info toM S in Facility e.g . as inAnnex AIdlenoyespass PI =nameunavailablePI = Presentation

43、IndicatorHascall beenanswered?yesyesHasSetup beensent to MS?nonopass calling name info toMS in Setupe.g. as in Annex A1Sendcallin gname infoafter answer?noyes2Figure 3b: MAF050(CNAP) Determination of the information for offering to the called party (Sheet 2) ETSI ETSI TS 123 096 V13.0.0 (2016-01)113

44、GPP TS 23.096 version 13.0.0 Release 13Query(Callingline identity)(CallingLineInfo*,CallingNameInfo*)MSa/TE MSCa/LEVLRbMSCb MSbSetupSetupinfo reqinfo ackSetupMAF050MAF04900OR1:NOR2:bOR1:YOR1:YOR2:a(Name)(PI)SetupSetupOR1:YOR2:a(Name)SetupFacilityOR2 : cOR1:YOR2:bOR1:YOR3:YOR3:YOR2:bOR1:YOR3:Nor* The

45、 Calling Line Info contains apresentation indicator and the calling lineidentity.* If included in the Setup, Calling NameInfo contains a presentation indicator andmay contain the calling name identity.NameDatabaseResponse(Name)timer(PI,Name)Setup(PI,Name)SetupFacilityFigure 4: Information Flow For C

46、alling Name Presentation: Mobile Station Or Fixed Terminal To Mobile Station NOTE: OR1: CNAP provisioned Y: yes N: no OR2: Calling Name Info a: allowed Presentation Indicator Value b: restricted c: unavailable OR3: Override category Y: yes N: no info: information req: request ack: acknowledge PI: pr

47、esentation indicator ETSI ETSI TS 123 096 V13.0.0 (2016-01)123GPP TS 23.096 version 13.0.0 Release 134.3 Information stored in the HLR CNAP may have the following logical states (refer to 3GPP TS 23.011 for an explanation of the notation): Provision State Registration State Activation State HLR Indu

48、ced State (Not Provisioned, Not Applicable, Not Active, Not Induced) (Provisioned, Not Applicable, Active and Operative, Not Induced) The HLR shall store the logical state of CNAP (which shall be one of the valid state listed above) on a per subscriber basis. The HLR shall also store the subscriptio

49、n option “override category“ on a per subscriber basis. The subscription options are: “Yes“ or “No“. 4.4 State Transition Model The following figure shows the successful cases of transition between the applicable logical states of CNAP. The state changes are caused by actions of the service provider. Note that error cases are not shown in the diagram as they normally do not cause change. Additionally, some successful requests may not cause a state change. Hence they are not shown in the diagram. (Not provisioned,Not Applicable,Not Active,Not Induced)

展开阅读全文
相关资源
猜你喜欢
  • DIN EN 61238-1-2004 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1 Test methods and requirements (IEC 61238-1 2003) Ger.pdf DIN EN 61238-1-2004 Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV) - Part 1 Test methods and requirements (IEC 61238-1 2003) Ger.pdf
  • DIN EN 61240-2013 Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules (IEC 61240 2012) Germ.pdf DIN EN 61240-2013 Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules (IEC 61240 2012) Germ.pdf
  • DIN EN 61243-1-2010 Live working - Voltage detectors - Part 1 Capacitive type to be used for voltages exceeding 1 kV a c (IEC 61243-1 2003 modified + Corrigendum 1 2005 + A1 2009) .pdf DIN EN 61243-1-2010 Live working - Voltage detectors - Part 1 Capacitive type to be used for voltages exceeding 1 kV a c (IEC 61243-1 2003 modified + Corrigendum 1 2005 + A1 2009) .pdf
  • DIN EN 61247-1997 PM-cores made of magnetic oxides and associated parts - Dimensions (IEC 61247 1995) German version EN 61247 1997《磁性氧化物制PM磁芯及其附件 尺寸》.pdf DIN EN 61247-1997 PM-cores made of magnetic oxides and associated parts - Dimensions (IEC 61247 1995) German version EN 61247 1997《磁性氧化物制PM磁芯及其附件 尺寸》.pdf
  • DIN EN 61248-1-1998 Transformers and inductors for use in electronic and telecommunication equipment - Part 1 Generic specification (IEC 61248-1 1996) German version EN 61248-1 199.pdf DIN EN 61248-1-1998 Transformers and inductors for use in electronic and telecommunication equipment - Part 1 Generic specification (IEC 61248-1 1996) German version EN 61248-1 199.pdf
  • DIN EN 61248-2-1998 Transformers and inductors for use in electronic and telecommunication equipment - Part 2 Sectional specification for signal transformers on the basis of the ca.pdf DIN EN 61248-2-1998 Transformers and inductors for use in electronic and telecommunication equipment - Part 2 Sectional specification for signal transformers on the basis of the ca.pdf
  • DIN EN 61248-3-1998 Transformers and inductors for use in electronic and telecommunication equipment - Part 3 Sectional specification for power transformers on the basis of the cap.pdf DIN EN 61248-3-1998 Transformers and inductors for use in electronic and telecommunication equipment - Part 3 Sectional specification for power transformers on the basis of the cap.pdf
  • DIN EN 61248-4-1998 Transformers and inductors for use in electronic and telecommunication equipment - Part 4 Sectional specification for power transformers for switched mode power.pdf DIN EN 61248-4-1998 Transformers and inductors for use in electronic and telecommunication equipment - Part 4 Sectional specification for power transformers for switched mode power.pdf
  • DIN EN 61248-5-1998 Transformers and inductors for use in electronic and telecommunication equipment - Part 5 Sectional specification for pulse transformers on the basis of the cap.pdf DIN EN 61248-5-1998 Transformers and inductors for use in electronic and telecommunication equipment - Part 5 Sectional specification for pulse transformers on the basis of the cap.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1