1、 ETSI TS 124 084 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Multi Party (MPTY) supplementary service; Stage 3 (3GPP TS 24.084 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICATI
2、ONSRETSI ETSI TS 124 084 V14.0.0 (2017-03)13GPP TS 24.084 version 14.0.0 Release 14Reference RTS/TSGC-0424084ve00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but
3、 non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions
4、 of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specifi
5、c network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find
6、 errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm
7、 except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reser
8、ved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by
9、the GSM Association. ETSI ETSI TS 124 084 V14.0.0 (2017-03)23GPP TS 24.084 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly ava
10、ilable for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web ser
11、ver (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may beco
12、me, essential to the present document. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GS
13、M, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of th
14、e ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 084 V14.0.0 (2017-03)33GPP TS 24.084 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g
15、3Modal verbs terminology 2g3Foreword . 4g30 Scope 5g30.1 References 5g30.2 Abbreviations . 6g31 MultiParty service (MPTY) 6g31.1 Beginning the MultiParty service . 6g31.2 Managing an active MultiParty call . 7g31.2.1 Served mobile subscriber 7g31.2.1.1 Put the MultiParty call on hold . 8g31.2.1.2 Cr
16、eate a private communication with one of the remote parties . 8g31.2.1.3 Terminate the entire MultiParty call . 9g31.2.1.4 Explicitly disconnect a remote party . 9g31.2.2 Remote Parties 9g31.2.2.1 Release from the MultiParty call . 9g31.2.2.2 Place his connection to the MultiParty call on hold, and
17、typically later retrieve it . 9g31.3 Managing a held MultiParty call 9g31.3.1 Served mobile subscriber 9g31.3.1.1 Retrieve the held MultiParty call 10g31.3.1.2 Initiate a new call 10g31.3.1.3 Process a call waiting request 10g31.3.1.4 Terminate the held MultiParty call 10g31.3.1.5 Explicitly disconn
18、ect a remote party . 10g31.3.2 Remote parties 10g31.4 Managing a single call and a MultiParty call . 10g31.4.1 Served mobile subscriber 10g31.4.1.1 Disconnect the single call 11g31.4.1.2 Disconnect the MPTY . 11g31.4.1.3 Disconnect all calls . 11g31.4.1.4 Add the single call to the MPTY . 11g31.4.1.
19、5 Alternate between the MPTY call and the single call . 11g31.5 Adding extra remote parties . 12g31.6 Auxiliary states for MPTY . 12g31.7 Activation, deactivation, registration, erasure and interrogation 12g31.8 Simultaneous use of MultiParty operations 13g3Annex A (informative): Change history . 14
20、g3History 15g3ETSI ETSI TS 124 084 V14.0.0 (2017-03)43GPP TS 24.084 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). This TS specifies the procedures used at the radio interface for normal operation and invocatio
21、n of MultiParty supplementary services within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change
22、of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. tech
23、nical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification; ETSI ETSI TS 124 084 V14.0.0 (2017-03)53GPP TS 24.084 version 14.0.0 Release 140 Scope The present document specifies the procedures used at the ra
24、dio interface (Reference point Um as defined in 3GPP TS 24.002) for normal operation and invocation of MultiParty supplementary services. In 3GPP TS 24.010 the general aspects of the specification of supplementary services at the layer 3 radio interface are given. 3GPP TS 24.080 specifies the format
25、s and coding for the supplementary services. Definitions and descriptions of supplementary services are given in 3GPP TS 22.004 and the 3GPP TS 22.08x and 3GPP TS 22.09x-series. 3GPP TS 22.084 is related specially to MultiParty supplementary services. Technical realization of supplementary services
26、is described in 3GPP TS 23.011 and the 3GPP TS 23.08x and 3GPP TS 23.09x-series. 3GPP TS 23.084 is related specially to MultiParty supplementary services. The procedures for Call Control, Mobility Management and Radio Resource management at the layer 3 radio interface are defined in 3GPP TS 24.007 a
27、nd 3GPP TS 24.008. The following supplementary service belongs to the MultiParty supplementary services and is described in the present document: - MultiParty service (MPTY) (clause 1). 0.1 References The following documents contain provisions which, through reference in this text, constitute provis
28、ions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a refere
29、nce to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.004: “General on supplementary services“. 3 3GPP TS 2
30、2.081: “Line identification supplementary services - Stage 1“. 4 3GPP TS 22.082: “Call Forwarding (CF) supplementary services - Stage 1“. 5 3GPP TS 22.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 1“. 6 3GPP TS 22.084: “MultiParty (MPTY) supplementary services - Stage 1
31、“. 7 3GPP TS 22.085: “Closed User Group (CUG) supplementary services - Stage 1“. 8 3GPP TS 22.086: “Advice of charge (AoC) supplementary services - Stage 1“. 9 3GPP TS 22.088: “Call Barring (CB) supplementary services - Stage 1“. 10 3GPP TS 22.090: “Unstructured Supplementary Services Data (USSD) -
32、Stage 1“. 11 3GPP TS 23.011: “Technical realization of supplementary services“. 12 3GPP TS 23.081: “Line identification supplementary services - Stage 2“. ETSI ETSI TS 124 084 V14.0.0 (2017-03)63GPP TS 24.084 version 14.0.0 Release 1413 3GPP TS 23.082: “Call Forwarding (CF) supplementary services -
33、Stage 2“. 14 3GPP TS 23.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 2“. 15 3GPP TS 23.084: “MultiParty (MPTY) supplementary services - Stage 2“. 16 3GPP TS 23.085: “Closed User Group (CUG) supplementary services - Stage 2“. 17 3GPP TS 23.086: “Advice of Charge (AoC) s
34、upplementary services - Stage 2“. 18 3GPP TS 23.088: “Call Barring (CB) supplementary services - Stage 2“. 19 3GPP TS 23.090: “Unstructured supplementary services operation - Stage 2“. 20 3GPP TS 24.002: “GSM-UMTS Public Land Mobile Network (PLMN) Access Reference Configuration“. 21 3GPP TS 24.007:
35、“Mobile radio interface signalling layer 3“. 22 3GPP TS 24.008: “Mobile radio interface layer 3 specification“. 23 3GPP TS 24.010: “Mobile radio interface layer 3; Supplementary services specification“. 24 3GPP TS 24.080: “Mobile radio interface layer 3 supplementary services specification; Formats
36、and coding“. 25 3GPP TS 24.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 3“. 0.2 Abbreviations Abbreviations used in the present document are listed in 3GPP TR 21.905. 1 MultiParty service (MPTY) 1.1 Beginning the MultiParty service The served mobile subscriber A may in
37、itiate an active MultiParty call from an active call C and a held call B. The mobile station invokes the service by sending a FACILITY message to the network containing the BuildMPTY request. This BuildMPTY request indicates to the network that the mobile subscriber wishes all his calls to be connec
38、ted together in a MultiParty call. The network will normally accept the request and connect the mobile subscriber with the other existing connections (active call C and held call B). If the request is not accepted, the network will indicate the error to the served mobile (see figure 1.1). The networ
39、k confirms with the same transaction identifier. Error values are specified in 3GPP TS 24.080. During the BuildMPTY operation the MS shall run a timer T(BuildMPTY). This timer is started when the operation is sent, and stopped when a response is received from the network. If this timer expires the M
40、S shall assume that the operation has failed, locally release the invokeID, and may re-attempt the operation or inform the user of the failure. ETSI ETSI TS 124 084 V14.0.0 (2017-03)73GPP TS 24.084 version 14.0.0 Release 14MS Network FACILITY (TI A-B/A-C) - Facility (Invoke = BuildMPTY) FACILITY (TI
41、 A-B/A-C) Facility (Invoke = HoldMPTY) FACILITY (TI A-X) Facility (Invoke = SplitMPTY) FACILITY (TI A-X) Facility (Invoke = RetrieveMPTY) FACILITY (TI A-X) New Version Subject/Comment Apr 1999 GSM 04.84 6.0.0 Transferred to 3GPP CN1 CN#03 24.084 R99 3.0.0 Approved at CN#03 CN#11 24.084 3.0.0 Rel-4 4
42、.0.0 Release 4 after CN#11 CN#16 24.084 4.0.0 Rel-4 4.0.1 References updated CN#16 24.084 4.0.1 Rel-5 5.0.0 Release 5 created after CN#16 CN#26 24.084 5.0.0 Rel-6 6.0.0 Release 6 created after CN#26 CT#36 24.084 6.0.0 Rel-7 7.0.0 Upgraded unchanged from Rel-6 CT#42 24.084 7.0.0 Rel-8 8.0.0 Upgraded
43、unchanged from Rel-7 CT#46 24.084 8.0.0 0002r1 Rel-9 9.0.0 MPTY notifications remote SIP parties 2011-03 24.084 9.0.0 - Rel-10 10.0.0 Update to Rel-10 version (MCC) 2012-09 24.084 10.0.0 - Rel-11 11.0.0 Update to Rel-11 version (MCC) 2014-09 24.084 11.0.0 - Rel-12 12.0.0 Update to Rel-12 version (MCC) 2015-12 24.084 12.0.0 - Rel-13 13.0.0 Update to Rel-13 version (MCC) 2017-03 24.084 13.0.0 - Rel-14 14.0.0 Update to Rel-14 version (MCC) ETSI ETSI TS 124 084 V14.0.0 (2017-03)153GPP TS 24.084 version 14.0.0 Release 14History Document history V14.0.0 March 2017 Publication
