ETSI TS 124 088-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Call Barring (CB) supplementary service Stage 3 (.pdf

上传人:diecharacter305 文档编号:741088 上传时间:2019-01-11 格式:PDF 页数:18 大小:106.93KB
下载 相关 举报
ETSI TS 124 088-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Call Barring (CB) supplementary service Stage 3 (.pdf_第1页
第1页 / 共18页
ETSI TS 124 088-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Call Barring (CB) supplementary service Stage 3 (.pdf_第2页
第2页 / 共18页
ETSI TS 124 088-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Call Barring (CB) supplementary service Stage 3 (.pdf_第3页
第3页 / 共18页
ETSI TS 124 088-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Call Barring (CB) supplementary service Stage 3 (.pdf_第4页
第4页 / 共18页
ETSI TS 124 088-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Call Barring (CB) supplementary service Stage 3 (.pdf_第5页
第5页 / 共18页
点击查看更多>>
资源描述

1、 ETSI TS 124 088 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Call Barring (CB) supplementary service; Stage 3 (3GPP TS 24.088 version 15.0.0 Release 15) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICATIO

2、NSRETSI ETSI TS 124 088 V15.0.0 (2018-07)13GPP TS 24.088 version 15.0.0 Release 15Reference RTS/TSGC-0424088vf00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but

3、non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions

4、of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific

5、 network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find

6、errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm

7、except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI

8、 logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and

9、 owned by the GSM Association. ETSI ETSI TS 124 088 V15.0.0 (2018-07)23GPP TS 24.088 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential

10、 IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are

11、 available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) whi

12、ch are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and

13、conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by

14、 ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between G

15、SM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of t

16、he ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 088 V15.0.0 (2018-07)33GPP TS 24.088 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2

17、g3Modal verbs terminology 2g3Foreword . 4g3Introduction 5g30 Scope 6g30.1 Normative references . 6g30.2 Abbreviations . 7g30.3 Cross phase compatibility 7g31 Barring of outgoing calls 7g31.1 Normal operation 7g31.2 Registration 8g31.3 Activation . 8g31.4 Deactivation . 9g31.5 Interrogation . 10g31.6

18、 Invocation and erasure 11g31.7 Cross phase compatibility 11g31.7.1 Network only supports GSM Phase 1 control of SS by the subscriber . 11g31.7.2 MS only supports protocol version 1 control of SS by the subscriber 11g32 Barring of incoming calls other than Anonymous Call Rejection 11g32.1 Normal ope

19、ration 11g32.2 Registration 12g32.3 Activation . 12g32.4 Deactivation . 13g32.5 Interrogation . 14g32.6 Invocation and erasure 15g32.7 Cross phase compatibility 15g32.7.1 Network only supports GSM Phase 1 control of SS by the subscriber . 15g32.7.2 MS only supports protocol version 1 control of SS b

20、y the subscriber 15g33 Anonymous Call Rejection 15g3Annex A (informative): Change history . 16g3History 17g3ETSI ETSI TS 124 088 V15.0.0 (2018-07)43GPP TS 24.088 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3GPP. This TS specifies the procedures used at the

21、 radio interface for normal operation, registration, erasure, activation, deactivation, invocation and interrogation of call barring supplementary services within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG a

22、pproval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates

23、TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification; ETSI ETSI TS 124 088 V15.0.0 (

24、2018-07)53GPP TS 24.088 version 15.0.0 Release 15Introduction The present document includes references to features which are not part of the Phase 2+ Release 96 of the GSM Technical specifications. All subclauses which were changed as a result of these features contain a marker (see table below) rel

25、evant to the particular feature. GSM 10.01 defines the correspondence between these features and GSM yearly releases. The following table lists all features that were introduced after Release 96. Feature Designator CAMEL Phase 2 $(CAMEL2)$ ETSI ETSI TS 124 088 V15.0.0 (2018-07)63GPP TS 24.088 versio

26、n 15.0.0 Release 150 Scope This Technical Specification (TS) specifies the procedures used at the radio interface (reference point Um as defined in 3GPP TS 24.002) for normal operation, registration, erasure, activation, deactivation, invocation and interrogation of call barring supplementary servic

27、es. Provision and withdrawal of supplementary services is an administrative matter between the mobile subscriber and the service provider and cause no signalling on the radio interface. In 3GPP TS 24.010 the general aspects of the specification of supplementary services at the layer 3 radio interfac

28、e are given. 3GPP TS 24.080 specifies the formats and coding for the supplementary services. Definitions and descriptions of supplementary services are given in 3GPP TS 22.004, GSM 02.8x and GSM 02.9x-series. Technical realization of supplementary services is described in 3GPP TS 23.011, GSM 03.8x a

29、nd GSM 03.9x-series. The procedures for Call Control, Mobility Management and Radio Resource management at the layer 3 radio interface are defined in 3GPP TS 24.007 and 3GPP TS 24.008. The following supplementary services belong to the call restriction supplementary services and are described in thi

30、s specification: - Barring of outgoing calls (clause 1): - Barring of all outgoing calls (BAOC) (Barring program 1); - Barring of outgoing international calls (BOIC) (Barring program 2); - Barring of outgoing international calls EXCEPT those directed to the home PLMN country (BOIC-exHC) (Baring prog

31、ram 3). - Barring of incoming calls (clause 2): - Barring of all incoming calls (BAIC) (Barring program 1); - Barring of incoming calls when roaming outside the home PLMN country (BIC-Roam) (Barring program 2); - Anonymous Call Rejection (ACR) (Barring program 3). 0.1 Normative references The follow

32、ing documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not a

33、pply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for

34、 3GPP Specifications“. 2 3GPP TS 22.004: “General on supplementary services“. 3 3GPP TS 23.011: “Technical realization of supplementary services“. 4 3GPP TS 24.002: “GSM Public Land Mobile Network (PLMN) access reference configuration“. 5 3GPP TS 24.007: “Mobile radio interface signalling layer 3; G

35、eneral aspects“. 6 3GPP TS 24.008: “Mobile radio interface layer 3 specification“. 7 3GPP TS 24.010: “Mobile radio interface layer 3; Supplementary services specification; General aspects“. ETSI ETSI TS 124 088 V15.0.0 (2018-07)73GPP TS 24.088 version 15.0.0 Release 158 3GPP TS 24.080: “Mobile radio

36、 interface layer 3 supplementary services specification; Formats and coding“. 9 3GPP TS 23.088: “Call Barring (CB) Supplementary Service; Stage 2“. 0.2 Abbreviations Abbreviations used in this specification are listed in 3GPP TR 21.905. 0.3 Cross phase compatibility For the following supplementary s

37、ervices, a number of changes exist between this specification and the protocol version 1 specification: - Barring of outgoing calls; - Barring of incoming calls. The main body of this specification assumes that all network entities comply with this version of the service. In each case an additional

38、subclauses 1.7 and 2.7 defines the additional requirements for when one or more network entities or the MS complies with the protocol version 1 specifications for the supplementary service procedures. 1 Barring of outgoing calls 1.1 Normal operation When a barring program relating to outgoing calls

39、is active and operative for a basic service, each call set up related to that basic service and not allowed by the barring program will be refused by the network. In this case a NotifySS operation containing the SS-Status indicating that a barring program relating to outgoing calls is currently acti

40、ve and operative will be sent to the served mobile subscriber in a clearing message (see figure 1.1). For SMS, RP cause “Call barred“ shall be sent to MS (see figure 1.2). MS Network SETUP - DISCONNECT/RELEASE/RELEASE COMPLETE RP-ERROR (RP-cause) Facility (Invoke = ActivateSS (SS-Code, BasicServiceC

41、ode) Password procedure according to 3GPP TS 24.010 RELEASE COMPLETE Facility (Invoke = DeactivateSS (SS-Code, BasicServiceCode) Password procedure according to 3GPP TS 24.010 RELEASE COMPLETE Facility (Invoke = InterrogateSS (SS-Code) RELEASE COMPLETE DISCONNECT/RELEASE/RELEASE COMPLETE Facility (I

42、nvoke = ActivateSS (SS-Code, BasicServiceCode) Password procedure according to 3GPP TS 24.010 RELEASE COMPLETE Facility (Invoke = DeactivateSS (SS-Code, BasicServiceCode) Password procedure according to 3GPP TS 24.010 RELEASE COMPLETE Facility (Invoke = InterrogateSS (SS-Code) RELEASE COMPLETE New V

43、ersion Subject/Comment Apr 1999 GSM 04.88 6.0.1 Transferred to 3GPP CN1 CN#03 24.088 R99 3.0.0 Approved at CN#03 CN#11 24.088 3.0.0 Rel-4 4.0.0 Approved at CN#11 CN#16 24.088 4.0.0 Rel-4 4.0.1 References updated CN#16 24.088 4.0.1 Rel-5 5.0.0 Rel-5 created after CN#16 CN#19 24.088 5.0.0 0001r2 Rel-6

44、 6.0.0 Introducing SMS Call Barring in PS domain CT#36 24.088 6.0.0 Rel-7 7.0.0 Upgraded unchanged from Rel-6 CT#42 24.088 7.0.0 Rel-8 8.0.0 Upgraded unchanged from Rel-7 2009-12 24.088 8.0.0 - Rel-9 9.0.0 Update to Rel-9 version (MCC) 2011-03 24.088 9.0.0 - Rel-10 10.0.0 Update to Rel-10 version (M

45、CC) CT#53 24.088 10.0.0 0002r1 Rel-11 11.0.0 Addition of Anonymous Call Rejection in the CS domain 2014-09 24.088 11.0.0 - Rel-12 12.0.0 Update to Rel-12 version (MCC) 2015-12 24.088 12.0.0 - Rel-13 13.0.0 Update to Rel-13 version (MCC) 2017-03 24.088 13.0.0 - Rel-14 14.0.0 Update to Rel-14 version (MCC) 2018-06 24.088 14.0.0 - Rel-14 15.0.0 Update to Rel-15 version (MCC) ETSI ETSI TS 124 088 V15.0.0 (2018-07)173GPP TS 24.088 version 15.0.0 Release 15History Document history V15.0.0 July 2018 Publication

展开阅读全文
相关资源
猜你喜欢
  • DIN EN ISO 105-X18-2007 Textiles - Tests for colour fastness - nPart X18 Assessment of the potential to phenolic yellowing of materials (ISO 105-X18 2007) English version of DIN EN.pdf DIN EN ISO 105-X18-2007 Textiles - Tests for colour fastness - nPart X18 Assessment of the potential to phenolic yellowing of materials (ISO 105-X18 2007) English version of DIN EN.pdf
  • DIN EN ISO 105-Z01-1995 Textiles - Tests for colour fastness - Part Z01 Colour fastness to metals in the dyebath Chromium salts (ISO 105-Z01 1993) German version EN ISO 105-Z01 199.pdf DIN EN ISO 105-Z01-1995 Textiles - Tests for colour fastness - Part Z01 Colour fastness to metals in the dyebath Chromium salts (ISO 105-Z01 1993) German version EN ISO 105-Z01 199.pdf
  • DIN EN ISO 105-Z02-1995 Textiles - Tests for colour fastness - Part Z02 Colour fastness of metals in the dyebath Iron and copper (ISO 105-Z02 1993) German version EN ISO 105-Z02 19.pdf DIN EN ISO 105-Z02-1995 Textiles - Tests for colour fastness - Part Z02 Colour fastness of metals in the dyebath Iron and copper (ISO 105-Z02 1993) German version EN ISO 105-Z02 19.pdf
  • DIN EN ISO 105-Z03-1998 Textiles - Tests for colour fastness - Part Z03 Intercompatibility of basic dyes for acrylic fibres (ISO 105-Z03 1996) German version EN ISO 105-Z03 1998《纺织.pdf DIN EN ISO 105-Z03-1998 Textiles - Tests for colour fastness - Part Z03 Intercompatibility of basic dyes for acrylic fibres (ISO 105-Z03 1996) German version EN ISO 105-Z03 1998《纺织.pdf
  • DIN EN ISO 105-Z04-1997 Textiles - Tests for colour fastness - Part Z04 Dispersibility of disperse dyes (ISO 105-Z04 1995) German version EN ISO 105-Z04 1997《纺织品 色牢度试验 第Z04部分 分散染料的.pdf DIN EN ISO 105-Z04-1997 Textiles - Tests for colour fastness - Part Z04 Dispersibility of disperse dyes (ISO 105-Z04 1995) German version EN ISO 105-Z04 1997《纺织品 色牢度试验 第Z04部分 分散染料的.pdf
  • DIN EN ISO 105-Z05-1998 Textiles - Tests for colour fastness - Part Z05 Determination of the dusting behaviour of dyes (ISO 105-Z05 1996) German version EN ISO 105-Z05 1997《纺织品 色牢度.pdf DIN EN ISO 105-Z05-1998 Textiles - Tests for colour fastness - Part Z05 Determination of the dusting behaviour of dyes (ISO 105-Z05 1996) German version EN ISO 105-Z05 1997《纺织品 色牢度.pdf
  • DIN EN ISO 105-Z06-2000 Textiles - Tests for colour fastness - Part Z06 Evaluation of dye and pigment migration (ISO 105-Z06 1998) German Version EN ISO 105-Z06 2000《纺织品 色牢度试验 第Z06.pdf DIN EN ISO 105-Z06-2000 Textiles - Tests for colour fastness - Part Z06 Evaluation of dye and pigment migration (ISO 105-Z06 1998) German Version EN ISO 105-Z06 2000《纺织品 色牢度试验 第Z06.pdf
  • DIN EN ISO 105-Z07-1997 Textiles - Tests for colour fastness - Part Z07 Determination of application solubility and solution stability of water-soluble dyes (ISO 105-Z07 1995) Germ.pdf DIN EN ISO 105-Z07-1997 Textiles - Tests for colour fastness - Part Z07 Determination of application solubility and solution stability of water-soluble dyes (ISO 105-Z07 1995) Germ.pdf
  • DIN EN ISO 105-Z08-1997 Textiles - Tests for colour fastness - Part Z08 Determination of solubility and solution stability of reactive dyes in the presence of electrolytes (ISO 105.pdf DIN EN ISO 105-Z08-1997 Textiles - Tests for colour fastness - Part Z08 Determination of solubility and solution stability of reactive dyes in the presence of electrolytes (ISO 105.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1